Used Worm Hackers for sale (352)

Condition: excellent (used), For sale: a SEW-Eurodrive WA20DT63L4/B03 worm gear motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. It shows normal signs of use, as visible in the photos. A power cable with a plug is included. Technical specifications: Manufacturer: SEW-Eurodrive Model: WA20DT63L4/B03 Motor power: 0.25 kW Power supply: 3× 230/400 V, 50 Hz Motor speed: 1300 rpm Output speed: 130 rpm Gear ratio: i = 10.25 Output torque: 16 Nm Protection class: IP54 Insulation class: B Bwedpfx Ansz Sngmjdew Operating mode: S1 Brake: 230 V AC Weight: 10.55 kg Manufacturer: SEW-Eurodrive, Germany The scope of sale includes exactly what is shown in the photos.

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Bedpfxszuyg Rs Andsww Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: ready for operation (used), functionality: fully functional, metric thread pitch (max.): 500 mm, metric thread pitch (min.): 1 mm, grinding length: 500 mm, grinding wheel diameter: 500 mm, rotational speed (min.): 1 rpm, metric thread diameter (min.): 10 mm, rotational speed (max.): 26 rpm, metric thread diameter (max.): 350 mm, clamping length: 1,200 mm, grinding wheel width: 60 mm, spindle speed (max.): 26 rpm, spindle speed (min.): 1 rpm, grinding spindle speed: 3,000 rpm, grinding spindle motor power: 12,000 W, grinding diameter: 350 mm, grinding wheel speed: 3,000 rpm, type of input current: three-phase, center width: 150 mm, Equipment: rotational speed infinitely variable, KLINGELNBERG HSS 350 Grinding machine – Special offer due to stock clearance 🔥 High-precision CNC grinding machine, perfect for gears, worm screws, and custom parts. Fully functional and ready to use. 🛠 Key technical specifications: • Workpiece diameter (max./min.): 350 mm / 10 mm • Clamping head bore diameter: 130 mm • Max. distance between centers: • With front centering tip: 750 mm • With rear centering tip: 1200 mm • Max. workpiece length: Unlimited • Max. shaft diameter (left/right): 130 mm / 150 mm • Max. grinding length: 500 mm • Max. number of gear teeth: 30 • Module (max./min.): 25 / 0.5 Bwjdohq Uh Hopfx Andew • Pitch (max./min.): 500 / 1 mm • Pressure angle (max./min.): 30° / 0° • Max. helix angle: 45° ⚙️ Grinding System Features: • Grinding wheel diameter (max./min.): 500 mm / 300 mm • Grinding wheel speed (stepless): 75 – 3000 rpm • Max. cutting speed: 45 m/s • Drive motor power: 12 kW • Workpiece spindle speed (stepless): 1 – 26 rpm 📐 Grinding Wheel Widths: • For thread grinding: 15 mm • For worm screws up to module 12: 25 mm • For module 12 to 20: 40 mm • For module 20 to 25: 60 mm 💻 CNC Control: FANUC Series 21-It ✅ Ideal for: • Gear manufacturers • Worm screw production • Precision machining workshops • Industrial machinery repair 📌 Limited-time offer due to machinery update Take advantage of this opportunity to acquire a high-performance CNC grinding machine with professional specs and immediate availability!

Condition: good (used), Year of construction: 1996, operating hours: 62,590 h, screw conveyor diameter: 50 mm, screw conveyor length: 1,300 mm, Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Bjdpfx Aoh Nmt Dsndeww inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Shredder, wood chipper, and wood shredder: Hacker, MHR630 ecoline Bedpjz R T Sfefx Andjww The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical and powerful solution. The machines are manufactured and directly distributed from our factory in Germany. Advantages: - Continuous, even shredding process - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase current) - Controlled by Siemens PLC - Includes optional scraper bar - MHR630 ecoline Rößler shredder: "Made in Germany"

Condition: ready for operation (used), * Brand: Radicon * Model: worm gear uits * Type: BU 12 * Ratio: 30 : 1 Bodpfxsywmaxe Andeww

Condition: used, Year of construction: 2020, Overview Bwsdszzz N Hjpfx Andew Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, Year of construction: 2011, workpiece diameter 320 mm Bjdpjt Hxbdjfx Andsww threading length 570 mm thread pitch 315 mm total power requirement 17 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Waste material shredder, Hacker wood shredder, chipper, shredder MHR630 proline The MHR proline series consists of robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and industrial enterprises seeking an economical yet powerful solution. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 rows of knives for increased throughput - Robust construction - Larger feed opening - Excellent value for money - Ready for connection - Controlled by Siemens PLC Bsdpfoz Tddvox Andeww - MHR630 proline Rößler waste material shredder – “Made in Germany”

Condition: excellent (used), functionality: fully functional, The dividing head is equipped with an SK40 spindle and has a spindle bore of 25mm. It can be swiveled from right to left up to 90° each. The dividing head spindle can be tilted 6°/15° from and towards the machine. It is suitable for all Deckel FP series milling machines and their "licensed machines," such as the Macmon M100. Bwodpjz Hyyfsfx Andjw The distance from the spindle axis to the tailstock guide is 100mm. Direct division is possible using a 360° division circle or 24 x 15° indexing. The distance from the dividing head center to the tailstock center is 400mm. Indirect division is achieved with a worm gear of 40:1, using a scale disk with 1' division or three different hole disks (A: 27; 31; 34; 41; 43 – B: 33; 38; 39; 42; 46 – C: 36; 37; 40; 58). Also included are a Röhm four-jaw chuck, a three-jaw chuck (possibly Röhm) with adapter rings, and a two-jaw chuck, as well as a tailstock with a tailstock bearing. The dividing head, which was originally non-functional, along with all accessories, has been disassembled into individual parts, refurbished, made fully functional, and painted in two colors (RAL 7035 light gray / RAL 5004 dark blue). The dividing head is not in use and can be delivered immediately. Minor signs of wear from previous use are visible to a small extent. A single-use transport crate, with a total weight of 109 kg, has been prepared for transport. A manual compiled from Deckel descriptions is also included in the scope of delivery.

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t Bwjdpfx Asihpg Eondjw

Condition: used, functionality: fully functional, color: green, The calender consists of the following units: - A set of 4 rollers - A set of roller drives - Frames - A running gear - A control cabinet The set of rollers consists of 4 rollers of different diameters. The rollers are mounted on a common frame, which allows you to change their mutual position (change the gap between the rollers). The gap between rollers 1 and 2 is adjusted using adjustment screws driven by MRA-63 type worm gears. The gap between rollers 2 and 3 is adjusted manually by turning the adjustment screws. Each roller has an individual drive, allowing you to change the rotational speed. The rotational speed of the rollers and the thickness of the plate are set on the operating panel of the Calender control cabinet. A pressure roller and disc knives for cutting the outer edges of the plate are installed above the last roller (No. 4). The knife spacing is adjustable, which allows the production of boards of various widths. Roller diameter: Roller 1 – 515.00 mm Roller 2 – 315.00 mm Roller 3 – 315.00 mm Roller 4 – 355.00 mm Roller 5 – 95.00 mm Disc knife 6 – 200.00 mm - Roller width 230 cm Bwodpfxowcxufe Andew - Roller working width 210 cm - Total width 300 cm - Height 250 cm - Extruder departure / arrival (calender-extruder) 70 cm - Length with arrival 350 cm Power supply - 3 x 400 V (32A) - Motors 4 x 0.75 kW - Fans 2 x 0.25 kW - Pumps 2 x 1.1 kW - Access motors 2x 0.25 kW - Central pump 1 x 0.5 kW - Roller pressure motors 2 x 0.25 kW - Razor blade motors 2 x 0.15 kW

Condition: excellent (used), Year of construction: 2009, Technical Data Machining: 5 axes: 3+2 Travel distances X / Y / Z: 300 / (300 + 100) / 330 mm Spindle speed max.: 24,000 min-1 Control system: FANUC Series 31i-MODEL A5 Tool magazine: 21 positions Rapid traverse X / Y / Z: 54 m/min Table load, base machine: max. 200 kg, evenly distributed Tool length max.: 190 mm; Ø40 mm in the range of 120–190 mm Tool diameter at 150–12,000 min-1: 80 mm Tool diameter at 12,000–15,000 min-1: 60 mm Tool diameter at 15,000–20,000 min-1: 45 mm Tool diameter at 20,000–24,000 min-1: 40 mm Bsdpj Aba Ifofx Andjww Peiseler indexing head: AWUP, pneumatic clamping up to 6 bar Peiseler: Faceplate speed max.: 55 min-1 Peiseler: Tangential torque during circular milling max.: 250 Nm Peiseler: Transport load, faceplate vertical: 150 kg Peiseler: Tilting moment: 1200 Nm Peiseler: Tangential torque clamped (6 bar): 500 Nm Peiseler: Center bore: 50 H7 mm Peiseler: Faceplate runout: 0.01 mm Peiseler: Center bore runout: ±0.01 mm Peiseler: Positional accuracy from worm gear: ±15 arcseconds Connection, weight and dimensions Tool weight / total tool weight: 2 / 23 kg Machine weight: 2050 kg Electrical connection: 3 phases, 200/220 V, 50/60 Hz Connected power: 10 kVA Equipment and scope of delivery Peiseler AWUP swivel/indexing head for 3+2-axis machining Elbaron electrostatic filter, documentation RONA 60 SV Renishaw OMP40-2 measuring probe Blum measuring probe in the work area Extinguishing system according to the photos Technical specifications are subject to change without notice. Errors and prior sale reserved. The properties agreed upon in the purchase contract and the agreed scope of delivery shall apply.

Condition: used, Year of construction: 2006, Manufacturer: Seydelmann Model: AV250 Year: 2006 Condition: Used Serial number: 06089-1 Stock number: 2914 Plate diameter: 250 mm Hopper: 800 liters Bwedpfxoz S H S Tj Andsw Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on the feed screw, 2 speeds on the working worm.

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 including a second pair of clamping jaws, width 200 mm Jaw width 200 mm Base body, type LC 160/200 (for jaw widths of 160 and 200) Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Bwsdpezfimujfx Andsw Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition optional: Clamping jaws, width 160 mm, height 50 mm, new € 200.00 Aluminum jaws, width 200, height 60 mm, height 80 mm, new € 200.00 Worm gear € 100.00

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Shredder, wood chipper, and material shredder – Hacker MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and an excellent price-performance ratio, making them ideal for craft businesses, recycling companies, and wood processing companies seeking an economical and high-performance solution. The use of Ecorings ensures a consistent shredding process for a wide variety of materials. An integrated, self-adjusting scraper bar reduces the occurrence of blockages in the feed chute when processing thin materials. The machines are manufactured in our factory in Germany and sold directly. Bwjdpo Afbydofx Andew Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent price-performance ratio - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - Includes optional self-adjusting scraper bar - Includes Ecorings - MHR630 ecoline Rößler material shredder – “Made in Germany”

Condition: used, Year of construction: 2023, Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data - Manufacturer: Gernep - Model: Soluta 6-720 2SK SD - Year of manufacture: 2023 - Machine type: rotary self-adhesive labeller - Rated output: 11,000 bottles/h - Adjustable range: 2,000 - 12,000 bottles/h - Container table diameter: 720 mm Bedpfx Ansz Dimpjdoww - Container plates: 12 - Pitch: 188.4 mm - Infeed/discharge star: 480 mm diameter, 8 divisions - Self-adhesive labelling stations: 2 - Labelling station drive: servo - Container plate drive: servo - Main drive: asynchronous - Infeed worm: single worm, mechanical drive - Height adjustment: electric - Running direction: left-hand machine - Installation variant: linear - Pneumatics: Festo Bottle formats Built for two glass bottle formats, each at 11,000 bottles per hour: - Glass bottle, 250 mm high, 75 mm diameter - Glass bottle, 215 mm high, 65 mm diameter - Labels on both formats: paper body label 110 x 75 mm, paper back label 50 x 75 mm Equipment - Two self-adhesive labelling stations - Touch panel operation, free-standing control cabinet, swivel arm - Frequency converter - Broken-container detection - Remote maintenance including VPN router - Prepared for dating and coding - Prepared for optical orientation - Format parts included: one infeed worm, one infeed/discharge star, one set of container plates, one set of centring bells Not fitted: label inspection, mechanical orientation. Condition The machine is set up and under power and can be inspected by arrangement. Availability Immediately available.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ V-rotor Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: Bwjdpsxavtdjfx Andsw Automatic star-delta starter Automatic shut-off in idle mode Vibration-damping machine feet CE compliant Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2002, workpiece dia. 40 mm max. module 2 min. module 0,1 workpiece length - max. 665 mm weight 4,5 t spindle bore diameter 30 mm Control Siemens dia. of cutter bearing 20 mm total power requirement 5,5 kW Technical data max. module 2 Pitch 0.5 - 25 mm Number of speeds multi-speed / multiple max. workpiece diameter40 mm max. workpiece length180 mm Milling cutter diameter max.80 mm max. milling cutter width12 mm Z-axis (milling length with counter point)90 mm Z-axis (milling length without counter point)113 mm Milling head swivelling angle30° / 30° Description Gear hobbing and thread cutting machine. LAMBERT - 124 CNC Bwedpfov Ucdvsx Andjw The machine is in a well-maintained condition.

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,000 kg, total length: 1,750 mm, total width: 1,100 mm, total height: 1,640 mm, working width: 510 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 24, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 510 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker shredders, wood chippers, and grinders – MHR510 ecoline XL Bwjdsz Hn Tmopfx Andew The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies seeking an economical yet powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 knife rows - Ecoring included - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase power) - Siemens PLC controlled - MHR510 ecoline Rößler shredders – “Made in Germany”

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions Bwsdpfexz Dqmjx Andew • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. Bedsy Hiyaspfx Andjww The set includes: - CAB label printer - Feed hopper - Acceleration conveyor - Weighing machine - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Product weight: up to 1 kg (possible calibration) Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Worm gear motor SA57 DRN80M4/BE1HR/ASE8/TH SEW Bjdpfszgcaqex Andjww

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, gear diameter: 250 mm, spindle speed (max.): 71 rpm, spindle speed (min.): 35 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,800 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: rotational speed infinitely variable, Economical production of straight-toothed bevel gears – both in single units and in series: The SW KF 250 is based on the proven cast iron bed of the Chemnitzer Modul ZFTK 250 and is completely rebuilt by Serwema Retrofit Solutions, with Siemens Sinumerik ONE, digital Sinamics S120 drives, and an electronic worm gear between the workpiece and weighing drive. The machine mills using the convoid process, a universal and highly economical process for straight-toothed bevel gears, as well as producing herringbone gears and spur couplings. Application areas: agricultural machinery, gearbox construction, drive technology, railways and mining – anywhere where straight-toothed bevel gears up to 250 mm are required and new machines are hardly offered. Delivery time is five to six months from order, with acceptance testing in Chemnitz together with you. The SerWeMa gear cutting software guides the operator through workpiece and tool data using masks, without the need for programming. Integrated technology cycles: plunging, rolling, plunging and rolling, and plunging with double rollers. Engagement angles from 14 to 28° can be freely selected, and the number of teeth can range from 6 to 100. The stiff, ribbed cast iron bed provides the static and dynamic rigidity for bevel gears up to module 7 with a tooth width of 40 mm; the hydraulic and coolant unit is integrated into the bed, with components from Rexroth, Parker and Hydac, and pulse lubrication from Bielomatik. All worm gears are newly manufactured in bronze. Bwjdoz E H Dbepfx Andew Technical data: max. bevel gear diameter 250 mm, max. module 7, number of teeth 6–100, max. tooth width 40 mm, engagement angle 14–28°, distance between workpiece spindle and bevel tip 40–280 mm, workpiece spindle mount 80 mm metric, cutter head diameter 355 mm with 22 cutters per side, cutter head speed 35–71 rpm, connection value 30 kVA. Installation dimensions approx. 2.5 × 2.1 × 1.9 m, weight approx. 6 t. Scope of supply: complete electrical equipment with Siemens Sinumerik ONE and Sinamics S120, climate-controlled control cabinet manufactured in-house, dialog software, all worm gears in bronze, magnetic chip conveyor, circulation and pulse lubrication, hydraulic unit, coolant system, new paint RAL 5015/7035, geometric acceptance test according to SerWeMa protocol based on DIN standards, documentation (operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagram), CE marking. Optional: installation, commissioning and operator training at your site.

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Bsdst Dx U Sspfx Andjww Connected load 2 x 0.37 kW Total system length 12450 mm