Used Worm Hackers for sale (352)

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Crown gear adjustment: Bedpfx Akew T Tpdoneww Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Bwodpot E Nw Tjfx Aknow Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Bodpsy Ax Thjfx Aknoww

Condition: refurbished (used), workpiece weight (max.): 40,000 kg, table diameter: 2,500 mm, spindle speed (max.): 100 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 24,000 W, outer diameter: 3,000 mm, overall weight: 40,000 kg, GEAR HOBBING MACHINE PFAUTER model P3001 New Siemens PLC with touch panel Spindle diameter: 2,500 mm Maximum workpiece diameter: 3,000 mm Maximum module: 25, in a single pass on C45 steel with a tensile strength of approximately 60 kgf/mm² Minimum number of teeth: 25 Maximum axial travel: 1,200 mm Table bore diameter: 500 mm Number of T-slots on the table: 12 Maximum table load: 40 tons Maximum gear hob diameter: 450 mm Tangential travel of the gear hob: 300 mm Gear hob rotation speed: 10–100 rpm, continuously variable across three ranges Main motor power (DC): 24 kW Weight: approximately 40,000 kg Bwodo Adua Uopfx Aknow Complete with: - New electrical panel - Internal gear hobbing head complete with gears, worm gears, and modules – overhauled - Overhauled ball screw - Overhauled guides - Tool holder slide - Double worm gear - Tool loading hoist - Tailstock - Hydraulic table clamping USED MACHINE, OVERHAULED

Condition: used, Holac Industrial Dicing Machine – VA Series (VA 90 / VA 120) Manufacturer: Holac Type: Industrial Dicing / Cubing Machine Model: VA Series (exact model to be confirmed) Availability: Direct Description This Holac industrial dicing machine is designed for high-capacity and precise cutting of a wide range of food products. The machine is equipped with a robust worm feed system, ensuring consistent product flow and uniform cutting results. Suitable for cutting products into cubes, strips or slices, depending on the installed knife set. Ideal for meat, cheese, vegetables and plant-based products. The machine is fully stainless steel, hygienically designed and easy to clean. Equipped with an original Holac Panelware control panel. Key Features - High-capacity industrial dicing machine - Continuous worm feed system - Interchangeable knife grids for different cutting sizes - Suitable for fresh and lightly frozen products Bwsdpfx Aox Ti Hmsknew - Solid stainless steel construction - Reliable and proven Holac technology Technical Specifications (approx.) - Capacity: up to 1,500 – 3,000 kg/hour (product dependent) - Cutting sizes: approx. 5 x 5 mm up to 40 x 40 mm - Product temperature: fresh to approx. -2 / -3 °C - Power supply: 400V / 50 Hz - Installed power: approx. 5.5 – 7.5 kW - Material: stainless steel (food grade) Applications - Meat (fresh or lightly frozen) - Cheese - Vegetables - Plant-based products - Convenience & pet food - Machine is in good working condition and ready for production. Video available on request. 📍 Located in the Netherlands 🌍 Worldwide delivery possible The information contained in this advertisement is for general information purposes only. Although care has been taken to ensure accuracy, no liability is accepted for any errors or omissions. Specifications are subject to change. More photos and full specifications: /

Condition: excellent (used), Year of construction: 2019, Geared motor, electric motor, electric geared motor, worm geared motor, flat geared motor -Condition: Geared motor is unused -Manufacturer: NORD DRIVESYSTEMS, Flat gearbox series F Bsdpfezu S Hpsx Akneww -Type: SK7382AZH-180MP/4 TF -Speed: 22 rpm -Power: 18.5 kW -Protection rating: IP55 -Hollow shaft: Ø 70 mm -Dimensions: 930/450/H660 mm -Weight: 410 kg

Condition: used, Year of construction: 2001, machine/vehicle number: LA15, Used BERTOLASO WDT10 washer dryer - Year 2001Technical Specifications & Performance DataThe Bertolaso WDT 10 is an external bottle washer-dryer engineered for reliable operation in beverage production and industrial packaging environments. It combines mechanical brushing with targeted water jets to remove residues on the bottle body, bottom, and closure area, followed by high-energy air-knife drying. This second hand unit is well-suited for integration within a used bottling line and provides robust construction for continuous-duty applications.Model: WDT 10Manufactured by: BertolasoYear: 2001Speed: 3.000 - 5.000 BPH Function: External bottle washing and dryingWashing system: Rotating brushes with directed water jetsDrying system: Seven blower motors with high-velocity air blades/hot airBottle handling: Infeed worm screw; infeed and outfeed star wheelsConstruction: Stainless steel frame and claddingGuards: Polycarbonate guard doorsElectrical supply: 400 V, 50 HzInstalled power: 20 kWApprox. mass: 2400 kgDocumentation: Complete electrical documentationAdvanced Automation & Control SystemsAutomation is anchored by a Danfoss variable-frequency drive for smooth speed control and Siemens control components for dependable governance of washing and drying sequences. The machine supports manual and automatic operating modes, allowing quick adaptation from setup and maintenance to full automatic production. Electrical specifications include 400 V, 50 Hz with a 20 kW installed load, making it straightforward to integrate into standard industrial power networks. Protective guarding enhances operator safety and visibility during operation.Production Line Integration CapabilitiesThe WDT 10 integrates easily into upstream and downstream bottling equipment thanks to its worm-screw infeed and star-wheel transfer, ensuring consistent bottle spacing and orientation. It is designed for bottle handling in beverage production, whether operating as a standalone module or inline with fillers, cappers, labelers, and packaging machinery. This flexibility supports a range of industrial packaging layouts for PET and glass bottles.Machine Condition & Maintenance HistoryThis second hand external bottle washer-dryer is presented in working condition with complete electrical documentation, facilitating commissioning, service, and spare-parts management. The robust stainless steel construction and established component brands contribute to long-term reliability and maintainability for beverage production environments.Operational Performance & VersatilityThe dual-action cleaning approach—brush scrubbing combined with targeted water jets—ensures thorough external cleaning of cylindrical containers, including difficult areas around the bottom and closure. The drying tunnel uses seven blower motors and air blades to deliver effective surface drying prior to labeling, coding, or secondary pac... Bsdpfxs Ady Azs Aknjww

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter Bodpfx Akezcqzijnjww filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, controller model: PLC Siemens S7, production capacity: 4,000 unit/h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Capacity: 4,000 bottles/hour Dimensions of screw cap: 30 × 10 mm Dimensions of PET bottle (20 ml): 26.05 × 48.38 mm MACHINE DETAILS Control system: PLC Siemens S7 Sorting hopper Height of transport chains: approx. 1,000 mm ± 50 mm Power consumption: 2.5 kW Voltage supply: 380/400 V Fuse rating: 16 A EQUIPMENT Centrifugal cap sorter made of stainless steel AISI 304 with cap level sensor Cap feed chute made of stainless steel AISI 304 with electronic cap jam detector Manual device for removing misaligned caps Pick-and-place system Capping heads with magnetic clutch and cap cone Bottle neck ring centering with spikes Frequency-controlled geared motor Special design of the height adjustment range for handling bottles outside the height adjustment range Anti-rotation device Protective device to cover the bottles Electric height adjustment of the capping head Axially adjustable worm Control cabinet Machine drive via Danfoss VLT 2800 frequency inverter Touch panel for operation FESTO pneumatics Diameter of the feed table: 800 mm Feed table with frequency inverter and separate drive Conveyor extension at the machine inlet: 500 mm Conveyor extension at the machine outlet: 200 mm Sensor control Bodpfxozyihho Aknsww Mechanical cap feeding system with floor-mounted storage container Vertical conveyor made of stainless steel AISI 304 with cap conveyor belt

Condition: used, Year of construction: 2026, Overview This Ferrero AV 9/12/1VA automatic triblock, built in 2026, is designed for filling vegetable edible oil into Marasca-type glass bottles. The block combines a 9-clamp air rinsing station, a 12-valve high-vacuum filling station and an AROL EAGLE VA-IES single-head capping station for ROPP 31.5 x 24 mm aluminum screw caps in one compact AISI 304 stainless steel machine with a nominal output of 2,000 bottles/hour (750 ml). The machine is new and unused. Format tooling for four Marasca sizes (250 / 500 / 750 / 1,000 ml), nitrogen injection before capping, a 7-inch Siemens SIMATIC HMI touchscreen in English and remote diagnostics via Ethernet are included - ready for immediate use. Please note: an optional mechanical caps elevator is available on request; it is not included in the sale price. Technical data - Manufacturer: Ferrero (Italy) - Model: AV 9/12/1VA - Year of manufacture: 2026 - Machine type: rinser - filler - capper triblock for glass bottles - Product: vegetable edible oil, ambient filling temperature - Rinsing: 9-clamp air rinsing turret - Filling: 12-valve high-vacuum filling turret - Capping: AROL EAGLE VA-IES single head, ROPP 31.5 x 24 mm aluminum caps - Capacity: 2,000 bottles/hour nominal (750 ml) - Bottle formats: Marasca 250 / 500 / 750 / 1,000 ml (tooling included) - Bottle diameter range: 55 - 110 mm; height range: 180 - 350 mm Bodpezkkp Ijfx Aknjww - Control: 7-inch Siemens SIMATIC HMI touchscreen (English) - Electrical supply: 400 V three-phase, 50 Hz; 8 kW installed power - Compressed air: approx. 435 Nl/min at 6 bar - Construction: AISI 304 stainless steel; CE marking Equipment - Air rinsing station with AISI 304 grippers, EPDM pads and maintenance-free TWIST rotation - High-vacuum filling station in AISI 304 and food-grade materials, steam or chemical sterilizable - Polished AISI 304 product tank with level indicator, height adjustment and tool-free lid - AROL capping station with vibrating cap dispenser, cap level detector and missing-cap detection - Worm screws, star wheels and conveyors for Marasca formats - Nitrogen injection before capping (gas supply by the customer) - Photocells at inlet and outlet, remote diagnostics via Ethernet - Full AISI 304 safety enclosure with LEXAN inspection doors and safety microswitches Condition New - built in 2026. The machine can be viewed and tested in operation on request. Availability Immediately available. Location: Italy.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, rotational speed (max.): 1,750 rpm, rotational speed (min.): 1,450 rpm, Equipment: type plate available, Refurbished Landert motor Manufacturer: Landert Motoren AG Bülach Bwodpfew Rn Hxox Aknjw Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Worm gear drive) Nameplate present Price negotiable Our asking price is €1,150.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and inaccuracies. Sale exclusively to countries within the EU.

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized gear hobbing heads for external and internal gear cutting are Bodpswzypnefx Aknjww designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Bjdpfszuz H Ssx Aknsww Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: used, Worm wheel and gear set, edge grinder, edge grinder, sander, drawer grinder, round bar grinder Bjdpfod Nb Tdjx Akneww -a set consisting of: 1 worm wheel and 1 gear for oscillation -is a: Original Husband replacement part -for: Husband edge sander -various shapes: single-flight or two-flight available -several sentences: available -Price: for 1 set -Weight per set: 1.4 kg

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Shredder, wood chipper, and material shredder – Hacker MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and an excellent price-performance ratio, making them ideal for craft businesses, recycling companies, and wood processing companies seeking an economical and high-performance solution. The use of Ecorings ensures a consistent shredding process for a wide variety of materials. An integrated, self-adjusting scraper bar reduces the occurrence of blockages in the feed chute when processing thin materials. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Robust construction - Larger feed opening Bedpfs Afbydex Akneww - Excellent price-performance ratio - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - Includes optional self-adjusting scraper bar - Includes Ecorings - MHR630 ecoline Rößler material shredder – “Made in Germany”

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm Bsdpfx Akexrwpkensww : 140 mm : 120 mm slide travel axial ( Z-axis ): 320/400 mm Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 *

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit Bwedpfx Akoxabzyenjw - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Bwedpfxex D Ewmj Aknew Extra Information Machine still under power

Condition: good (used), Year of construction: 2005, working width: 1,000 mm, Deburring machine Fab. LISSMAC Typ. SBM-B 1000 Year 2005 Technical data Make: LISSMAC Type: SBM-B 1000 Year of construction: 2005 Passage width: 1000 mm Sheet thickness: max. 20 mm Sheet size min. length: 150 mm Sheet size min. width: 100 mm Speed: 1400 rpm Brush motor power: 4 x 7.5 kW Dimensions: approx. L 2.20 x W 1.50 x H 1.50 m Weight: approx. 1.5 t Equipment - Automatic material feed-through - Infinitely variable feed rate 0-10 m/min - Sheet thickness adjustment: Hand crank with worm gear and scale, infinitely variable - Brush depth adjustment: Hand crank with worm gear and scale, infinitely variable - Various accessories - Operating instructions All information without guarantee. A demonstration is possible at any time in our showroom. Bsdpfx Akovgb Hgeneww

Condition: used, mileage: 1,01,381 km, power: 107 kW (145.48 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 2,915 kg, maximum load weight: 3,085 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,200 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,770 mm, loading space width: 1,114 mm, loading space height: 380 mm, operating hours: 8,519 h, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * One owner * Complete documentation with inspection reports available * 8,519 operating hours * The Kiefer Boki is in visually very good condition * Model: Kiefer Boki 1151B with COPMA loader crane mounted at the rear and folded * 4x4 all-wheel drive * Front lift with municipal hydraulics * Loader crane COPMA 35.3 with 3 hydraulic extensions * Lifting capacities: at 2.75 m = 995 kg, 3.11 m = 885 kg, 4.44 m = 600 kg, 5.77 m = 450 kg, 7.10 m = 355 kg, 8.45 m = 250 kg * Hook height: 10.5 meters * 5+6 control circuits * Rotary servo * Two clamshell buckets available at additional cost * 2 hydraulic outriggers * 3-way tipper * Body dimensions: L=1,770 mm x W=1,114 mm x H=380 mm * Trailer coupling * Towing capacity: 3,500 kg * Snow plow blade available at additional cost * Winter service lighting * 5-speed gearbox * Cab with 2 seats * Worm drive * Heated windshield * Joystick control * Rotating beacon lights * ABS * Differential lock * Leaf spring suspension * Wheelbase: 2,250 mm * Gross vehicle weight (GVW): 6,000 kg * Empty weight: 2,915 kg * Payload: 3,085 kg * In case of sale to traders or for export (both inside and outside the EU), German commercial code applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV certification, safety inspection (SP), or UVV regulation inspection. Bodpfsxxi Swsx Aknjww You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid misunderstandings about their condition and suitability on the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability for errors or incorrect information is assumed. The buyer is obliged to independently verify the condition and features of the goods/vehicles. We reserve the right to change, prior sale, and errors.

Condition: new, new ! all stainless steel with 160 mm-head 40 kW Capacity: ± 2.500 kg/h grinder for fresh and frozen meat: 0°C to -8°C dimensions (l x w x h) : 3.000 x 2.000 x 2.000 mm Bodpfo Agmrpox Aknoww + Loader for eurobins + Tool trolley for 160 mm grinder The automatic cross-feed meat grinder is a robust and versatile machine, designed for the efficient processing of both fresh and frozen meat down to -8 °C, as well as other food products. Thanks to its integrated angular feed system, the product is delivered evenly and in a controlled manner, resulting in consistent and high-quality grinding. The machine is constructed entirely from stainless steel, including the cutting worm, feeding worm, and worm housing, ensuring optimal hygiene, durability, and easy cleaning. Operation is controlled via an electronic control panel, allowing the user to select between two speeds for both the feeding worm and the cutting worm. Combined with various knife configurations, this enables a wide range of cuts, from coarse to ultra-fine grinding. For operator safety, the grinder is equipped with an observation platform that automatically stops the machine when opened, as well as a safety rail around the feeding area that immediately halts operation upon contact. Optionally, the grinder can be fitted with a loading system for 200-liter standard meat carts. This system is available in two versions: a column-type or a hydraulic side-loading variant, depending on the specific needs of the user.

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm Bjdpfxozzz Ivj Aknjww - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Year of construction: 1980, condition: good (used), Movable positioning table, manufacturer WAGNER, type FE4000, year of manufacture 1980. Travel distance: 4,000 mm Bwsdpfjg Uf I Aox Aknsw Table surface: 4,000 mm x 1,400 mm Feed rate: 8 - 2,500 mm/min Rapid traverse: 4 m/min Load capacity, max.: 12,500 kg Weight, approx.: 12,000 kg In good condition. Hydraulic clamping and worm gear drive.

Condition: used, mileage: 2,62,581 km, power: 170 kW (231.14 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 6,800 kg, maximum load weight: 5,190 kg, overall weight: 11,990 kg, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, onboard computer, power assisted steering, seat heater, trailer coupling, * German vehicle Bjdpfx Ajvhqvmokneww * Condition: see photos * Only 15,307 operating hours * Premium salt spreader GEMEINER type 3000TCFS 3m3 * Usable volume: 3.0 m³ * Snow plow blade not included; we can supply one if required * Clearing width: 3,300 mm * Vario Pilot dual steering system * Hydrostatic drive system (Easy Drive) * 6-cylinder * Municipal control system * Tipping hydraulics * Trailer coupling * Towing capacity: 28,010 kg * Trailer hydraulics * Hydraulic front mounting plate * Front hydraulics * Front PTO * 4x4 all-wheel drive * Winter service lighting * Air conditioning * Cruise control * Worm drive * Engine brake * Joystick control * Heated windscreen * Air-suspended driver's seat with seat heating * Electrically heated, adjustable mirrors * Electric windows * Storage compartments * Anti-lock braking system (ABS) * Raised exhaust system * Leaf suspension * Wheelbase: 3,600 mm * Gross vehicle weight (GVW): 11,990 kg * Unladen weight: 6,800 kg * Payload: 5,190 kg * Sale to businesses/traders only, plus 19% VAT If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new safety inspection (SP), without new accident prevention regulation (UVV). More trucks can be found on our homepage at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspection appointments are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor - mixer - dispenser, water / flour, horizontal - worm conveyor - Press Bwsdpfx Akoh Dxgasnsw - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta - Metal Detector - Automatic packing unit