Edge banding machine

Ott Tornado

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Isdelc Ewiopfx Adwsht Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) Ijdpfx Ajdx Daaodweht • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Ijdpfxsxdpm So Adwoht Equipment and technical specifications: - Round tank glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end trimming - Top/bottom milling units: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing radii - Surface scraper: for smoothing the edge surfaces - Buffing unit: 2 buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: Short notice Location: Bavaria

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, serviced regularly (last service by Homag in 11/2024) Features and technical specifications: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) Minimum edge thickness: 0.3 mm (roll material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (roll material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency-controlled) Type of glue: EVA hot-melt adhesive Glue application (pot / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-controlled Heat-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, can be switched manually) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush milling: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour routing unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing module FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: multiple Ø 100 mm (individual extraction per unit) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU Directive 98/37/EC Dimensions / required space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system visible in the pictures is not included in the scope of supply! Iedpfx Aowx Aaqodwsht Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Ihodpswwtpyefx Adwst

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Ihedpfxjgmn H As Adwjt

Condition: like new (used), Year of construction: 2019, I sell the horizontal throughfeed CNC working centre Vitap Point K2 2.0, Year 2019. Configuration: 1 pc. milling spindle 5,0 KW 12 + 4 + 4 pcs. drilling units 1 pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Workpiece max. dimension - x 1250 x 50 mm Workpiece min. dimensions 270/400 x 185 x 4 mm Total area covered: 2900 x 1650 mm Total weight: 950 kg. Ihjdpfx Aovx Dz Dodwjt With full documentation and CE. Very good condition. Available immediately.

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem Isdpfsrhilxex Adwoht o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Ihedpexgrfpefx Adwet Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: new, Year of construction: 2025, CNC MILLING MACHINE C2131 IND (working area 2100 x 3100 mm) dynamic and precise milling plotter based on components from global manufacturers equipped, among others, with spindle of Italian production HSD. Work table Sectional table with six independent vacuum sections, made of rigid and resistant HPL panels, controlled directly from the control cabinet, Each section has holes into which the vacuum from the vacuum pump is fed via a system of tubes, The main openings in the vacuum table have plugs to accommodate different material formats, Table equipped with buffers in two axes! Pneumatic positioners to ensure that the material is always positioned in the same place, Spindle High-quality brushless spindle from a renowned manufacturer, 9 kW, powered by inverter, with overload protection . Milling electro-spindle with innovative AIR cooling system. 3.Drive Energy-efficient YASKAWA high-performance AC servo drives, controlled by a digital controller, provide excellent machining quality while maintaining high operating speeds in each direction, Brushless AC servo motors driving the X, Y axes transfer the drive via high-performance planetary gears The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The door is moved along the X and Y axes by HIWIN guide rails and bevel gears, which guarantee many years of trouble-free operation, and are made of high-quality hardened and tempered steel. Construction The rigid table structure , made of ribbed steel, excludes vibrations during the production process. 5 Tool magazine and tool measuring sensor The machine is equipped with a 12-position linear tool magazine, a set of ISO30 cones and ER32 bushings. Iodovup Unopfx Adwsht Toolholders included: ISO30 and toolholder sleeves of size: 1/2’ - 6 pcs; 1/8’ - 2 pcs; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. 6 Software, INDUSTRIAL CONTROL: The machine is controlled by a SYNTEC industrial controller as in large machining centres. Included with the controller: keypad and LCD display. Optional latest software UCanCAM V12 Vacuum pump (optional) and extraction foot. The use of a vacuum pump significantly increases the clamping force of the workpieces on the machine table, so that the material does not move. The extraction foot is penumatic, located at the spindle, and allows the connection of any chip extractor, keeping the machining clean, safe and at the same time maintaining the precision of the work Technical specifications Working area 2100x3100 mm Z axis 300 mm Structure Arm in cast iron / table in welded steel Drives hybrid servo motors (AC LEADSHINE) 1500W Hybrid table Spindle power 9 kW Shimpo gearbox Spindle speed 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Repositioning accuracy 0.01 mm Linear bearing trapezoidal rails, Hiwin carriages Material clamping vacuum, hybrid Vacuum pump (optional) 7.5 kW, 8 independent vacuum sections Software (optional) UCanCAM V12