Veneer saw

Scheer FM8 - 3100

Condition: used, Year of construction: 1991, Cutting length 3100 mm Iodpfjr I E Hcsx Ab Iea Cutting height 45 mm Motor output 1,8 kW dimensions 4000 x 500 x 920 mm weight 450 kg

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile second hand machine spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 Iodpovzghrefx Ab Ija shaft diameter mm. 50 volt. 380/50 weight kg. 1000

Condition: used, Year of construction: 1992, Manufacturer: Scheer Model: FM8-3100 Used machine Not operational Pressure beam is warped; needs to be straightened Year of manufacture: 1992 Iedpjxdpkkefx Ab Iea Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamps Rear fence Weight approx. kg: 400 Location: Röllbach Availability: short notice

Condition: used, No. 04473 Veneer saw Scheer FM 8 - 3100 Used Jointing and fine-cutting machine for joint-tight and splinter-free sawing of veneer, chipboard, blockboard or solid wood Strip cuts are very easy to make Rear table is approx. 470 mm wide The clamping beam is operated pneumatically The saw unit is guided by hand Cutting length 3100 mm Cutting height max. 45 mm Motor 1.8 kW Transport dimensions approx. 3800 x 1100 x 1400 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Ijdpfx Abew A Acte Ija Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Ijdjvvkfdspfx Ab Ija

Condition: used, used, good conditionmanufactured by Scheertype FM 8-3100Masch.-No. 83077motor 1,85 kWcut length 3100 mmsaw blade diameter ca. 160 mmpneumatic clampingrear extented tableself-exhaustrequired space ca. l x w x h mm4000 x 1000 x 1300weight ca. 450 kglocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Iodpfx Ajvwftxsb Iea

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamp Rear fence Weight approx. kg: 400 Iodpfx Absw I Ulpe Iea Location: Hochheim Availability: short term

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% serial number GEF 2240 Iedpfx Absrxxbts Ioa height of stroke 3300 mm weight of the machine ca. 9650 t

Condition: reconditioned (used), Heavy-duty surface planer Solid German engineering Finely planed machine tables, total table length 3000 mm Table adjustment with ball bearings Chip removal system with micrometer gauge Adjustment for hollow and pointed edges with scale display Dressing fence in heavy cast iron design - 45 degree swivel and height adjustable Machine completely rewired Automatic star-delta start Motor protection switch Motor brake Emergency stop switch CE Iodpjvi H Nfsfx Ab Iea Blade shaft with 4 strip blades Cutter head diameter 120 mm Planing width: 410 mm, Working table length: 3,000 mm, Cutterblock speed: 5,000 rpm, Motor 400 V, 4.0 kW, 50 Hz Weight approx. : 1050 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, mileage: 86,487 km, power: 93 kW (126.44 HP), fuel type: gasoline, gearing type: automatic, first registration: 07/1994, fuel consumption (combined): 14 l/100km, emission class: euro1, color: green, machine/vehicle number: 1410A, Equipment: all wheel drive, trailer coupling, TUV and AU are made NEW and gets a green environmental badge :-) Special army version with long wheelbase, the Mercedes-G is in a super good condition, even the body is in a good condition! unimaginable how the Swiss manage that) The top is super fast from PKw with 8 seats to pick-up with 2 seats to convert, there are about 10 G-models of this export train in stock, the interior isL/W/H 1760/1520/1250, immediately ready for use, directly from the military very well maintained and maintained!!! Equipped with: 2850mm wheelbase, automatic with 4 gears plus off-road reduction, four-wheel drive, 4-cylinder gasoline engine with 2299cm? The fuel consumption on the highway is about 13 liters per 100km and on short distances just under 15 liters (this information I got from my customers), rear axle lock, (truck registration possible then only 2 seats in front), good tires 205R16, and much more. - We also have some accident vehicles in stock at favorable prices! - Ideal as a rally vehicle or hobby vehicle, also as a vehicle for hunting just great, to the G I also have the matching 1-axle off-road trailer with overrun brake on offer, - Several other all-wheel drive vehicles and other military vehicles are still available in my offer. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Isdpfx Abeqx Sybj Iea