Work center

SCM MORBIDELLI M800 X5

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Duodpjxraimefx Agfor Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Biesse Rover A 1542 CNC Machining Center Working area X: 4140 mm Working area Y: 1560 mm Working area Z: 245 mm 5-axis electrospindle, HSK-F63 interface Vertical drilling heads: 17 Horizontal drilling heads in X: 6 Horizontal drilling heads in Y: 4 Grooving saw blade 25-position tool changer Worktable with 8 beams Dsdpsyh Nd Rsfx Agfour

Year of construction: 2024, condition: new, This CNC milling machine is an excellent tool to take your hobby to the next level. The 0404 mini is both convenient and compact, making it suitable for any workshop. The Wattsan desktop router can operate on wood, plastic, plexiglass, aluminum, brass, and more. Dedpfxeiinkko Agfjur The Wattsan 0404 mini's cast-iron frame ensures accuracy and stability throughout any type of demanding operation. It can make a 3D mill. Our CNC milling machine includes a T-slot table that allows you to secure items using bolts, clamps, or a mechanical holdback. You can give our managers a call for additional details! Wattsan 0404 mini characteristics: Working area: 400 x 400 mm Spindle: 1.5 kW Machine size: 710x710x740 mm Packing size: 860x860x810 mm Weight: 155 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Dodpoxranpofx Agfour Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor Dodou Hmacepfx Agfjur 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Condition: good (used), Year of construction: 2000, functionality: fully functional, Holtec Bruks long log intake system with root reducer, consisting of: Cross infeed conveyor with 6 chain strands, split drive. Holtec hydraulic step feeder with split drive. Bruks root reducer type RR 1200 for long logs – milling length 1200 mm. Holtec heavy-duty conveyor belt for round timber. Dsdpewxck Aofx Agfsur Scraper conveyor for waste removal and distributor auger.

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Dsdpfevu U Itsx Agfeur Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used BIESSE Selco WN2 saw - OSI control - label printer - Year 2017 - available April Dujdpoyrr U Nsfx Agfsr - saw height 60 mm - 1–80 m/min - quick-change saw blade - 4 air cushion tables

Condition: used, machine/vehicle number: 008381, X axis working area: 4250 mm Y axis working area: 2280 mm Working Table: Flat table Duedox Swc Hepfx Agfjr Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 11 Total number of tool changer positions: 24

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Duodpfx Agjxy Tmnefsr