Accessories

unbekannt Spannmittel / Zubehör

Condition: used, amount 1 Palette Wooden box containing a variety of metal parts. -> Precision steel blocks — cleanly ground, right-angled blocks with holes. They are typically used as stops, spacers, clamping aids, or measuring aids. Lhodezg Nk Nopfx Akmon -> Angle and V-blocks — large, angular pieces with slanted recesses. They are used to securely clamp round or irregular workpieces. -> Clamping plates / perforated strips — long metal strips with many evenly spaced holes. Typically used for flexible fixtures where different parts can be combined. -> Small square blocks with a center hole — presumably spacers, centering aids, or modular components for fixtures. Sorting boxes — contain screws, small parts, or other clamping components. Complete Package Price

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Lodpfxjyuchrs Akmjhn Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Ljdpfx Aoztz Hcekmshn

Condition: used, Year of construction: 2023, rear tire size: 0%, We are offering for sale one used Bergmann M 201 crawler from year 2023 with approximately 155 operating hours. Equipment: radio-controlled crawler, payload 500 kg, unladen weight 1200 kg, lifting capacity 6000 N, height 1287 mm, length 2087 mm, width 1350 mm, rubber tracks 2800 mm wide, angled tread for slope stability, self-cleaning feature, water-cooled 3-cylinder Hatz diesel engine, output 42 kW at 2800 rpm, radiator fan with reversible drive for self-cleaning, hydrostatic travel drive, 0-8.5 km/h. 12V system, LED headlights, hydraulic multi-coupler, one high-performance hydraulic circuit up to 85 L/min, two auxiliary hydraulic circuits up to 10 L/min each, including Müthing mulcher with a working width of 1.40 m, including Seppi mulcher for processing brush and wood up to a diameter of 15 cm. Further details available on request. Location: 93095 Hagelstadt. Ledpfx Akjyq Aw Somehn

Condition: used, diameter div. number 16x tool adaptor SK 50 Tool Package DS SK 50 Lhedpfx Akewtrztemjn Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, ERBEND D-SFA 4230 – CNC Folding Machine The ERBEND D-SFA 4230 is a powerful double-sided CNC folding machine for accurate and flexible sheet metal processing. This machine is offered on behalf of a customer and has less than 10 operating hours. It is in nearly new condition, fully functional and immediately available. The machine can be viewed under power and tested by appointment. Lodszwqwxjpfx Akmohn Main Features 4,200 mm bending length Double-sided folding: upwards and downwards ERFOLD 3D CNC control 2D/3D programming and simulation Motorized CNC axes U-shaped back gauge Pneumatic back gauge fingers Integrated vacuum cups for sheet positioning Segmented upper and lower tooling Pneumatic tool clamping CE certified Technical Specifications Model: ERBEND D-SFA 4230 Bending length: 4,200 mm Steel S235: max. 2.25 mm Stainless steel: max. 2.0 mm Aluminium: max. 3.0 mm Control: ERFOLD 3D CNC CNC axes: A, B and D axis Upper tool: 200 mm Crowning: Manual Machine weight: approx. 11,800 kg Double-Sided Folding The D-SFA technology allows the machine to fold both upwards and downwards, significantly reducing the need to turn or reposition the workpiece. Combined with the CNC-controlled back gauge, vacuum sheet positioning and ERFOLD 3D programming, this makes the machine particularly suitable for efficient production of large and complex sheet metal parts. Condition & Availability Less than 10 operating hours Nearly new condition Fully functional Immediately available Inspection and testing under power possible An excellent opportunity to acquire a nearly new ERBEND D-SFA 4230 without the delivery time of a new machine. Contact us for further information, pricing or to arrange a demonstration.

Condition: excellent (used), functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 260 mm, spindle speed (max.): 800 rpm, travel distance X-axis: 3,000 mm, rotational speed (max.): 800 rpm, distance table center to spindle nose: 3,000 mm, Equipment: rotational speed infinitely variable, Gurutzpe A1000 x 3000mm lathe with Fagor 8037 CNC, equipped with a 3-jaw hydraulic chuck, 260mm spindle bore, 1000mm swing over the bed, 600mm swing over the cross slide, 260mm tailstock bore, 2 speed ranges of 0-800 rpm, rapid traverse on the X-axis at 8 m/min, rapid traverse on the Z-axis at 8 m/min, rapid traverse at 8 mpm, 140mm tailstock diameter, Morse 6 taper, 650mm bed width, 27 kW power, 12-ton weight. The lathe is in very good condition. Lodpfxeztz A Ro Akmjhn