Rip saw

WEINIG Raimann Flexirip 6200

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe Nwsdpfxoyh Hwuj Aiqsi - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- Nwjdjx Tu N Hopfx Aiqei For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the control p...

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: Nwedpfx Ajg Tumyoiqji LEUT Wood-Alu 110mm Hole 50mm. All complete. Very good condition. Available as a set. Possible to buy also separately.

Condition: new, Main features of the machine: Thicknesser TH 630 is a simple, solid construction intended for everyday work in the workshop, with a planer shaft width of 630 mm. It is characterized by a large massive ribbed cast iron table, which eliminates any vibrations during operation. The machine has an extremely powerful motor that drives the cutter heads (notched knives), which make the process of planing the most difficult wooden elements an easy task. Each knife is easy to replace if worn or damaged. Moving the table up and down is automatic after entering the appropriate dimensions. The sum of these many advantages gives the possibility of very precise machining settings. Advantages: Worktable mounted on 4 bolts Controller for automatic table height adjustment Planer shaft by 120, 4 knives The possibility of cutting large dimensions Nodpfxogpg E So Aiqewi Technical data: Max planing width: 630 mm Max planing height: 300 mm Min length of the planed element: 280 mm Knife shaft diameter: 120 mm 2 rolls in the table top Number of knives: 4 The dimensions of the knives: 630x30x3 mm Power supply: 400V Total power: 7.5 kW Smooth feed speed: from 4-20 mm / min Electric Lifting Extraction port: 150 mm Weight: 890 kg Table dimensions: 1050x630 mm Milling block speed: 5500 rpm The machine is available immediately! Machine dimensions Length: 1060 mm Width: 1060 mm Height: 1160 mm

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Nwodpfx Aiot Amc Ijqji

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder Nwedpsncc Igjfx Aiqoi only machine machine is dismantled, immediately available Transport can be organized

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Location: Nattheim. Nedpfx Aioy R Tqkoqswi

Condition: not inspected (used), functionality: unexamined, MULTIPLE CIRCULAR SAW PAUL K 34G/1500 OCCASION Nwedpouryrnefx Aiqsi TECHNICAL FEATURES: - DRAGGING SYSTEM RUBBERIZED ROLLERS. - USEFUL DRAG WIDTH OF 1.500 MM. - MAIN ENGINE POWER 37 KW (50 Cv) - ELECTRONIC VARIATOR REDUCER MOTOR OF DRAGGING 3 HP AND 2-48 M/MIN - MAXIMUM SAW DIAMETER 300 MM - CUTTING HEIGHT MAX 100 MM

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Nwedpfxov Ivx Ts Aiqji

Condition: excellent (used), Year of construction: 1995, upon request Nodpfx Aofxgmgoiqswi