Used Accessories and spare parts for sale (301)

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 Hfedpfxjd Dk A Ae Aabon No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown -Hole: Ø 24 mm -26 teeth: belt width 32 mm -Quantity: 5x timing belt pulley available -Price: per piece Hsdjw E Ip Repfx Aabefn -Dimensions: Ø 75 x 53 mm -Weight: 0.3 kg/pcs

Year of construction: 2000, condition: used, 3 Stück Hfjdpfsupmwlex Aabjn Dimensions (L/W/H) siehe Bilder mm weight of the machine ca. . t

Condition: like new (used), Manufacturer: Steinel Type: FVK 3 Hfedpfx Aougr Amjabsn Mounting: MK Stop surface W x H: 260 x 420 mm Hole spacing at top: 165 mm Hole spacing at bottom: 200 mm Hole spacing at an angle: 110 mm Diameter inside: 130 mm Condition: very good Weight: 33 kg Dimensions: 260 x 230 x 420 mm

Condition: good (used), Several measuring probes from Heidenhain are available for sale. - Manufacturer: Heidenhain - Type: TS110 / TS111 untested = €450 each TS110 / TS111 tested = €750 each TS220 / TS230 = €950 each ! Since several probes are for sale, please specify the desired type! - Holder: SK50 Hjdohlafnopfx Aabsfn

Condition: used, Diameter: 630 mm Height: 170 mm Dividing head base on table: 690 mm Taper: Morse 5 / 65 mm Admissible weight: 550 kg Hfodow H Rmzepfx Aabsn Dividing head weight: 302 kg

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg Hodpfx Ajf Axn Ueabofn good condition

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown -Hole: Ø 25 mm -26 teeth: belt width 32 mm -Quantity: 4x timing belt pulley available -Price: per piece Hsdpfew E Ip Dsx Aabsfn -Dimensions: Ø 75 x 50 mm -Weight: 0.3 kg/pcs

Condition: used, max. ram stroke . mm Hfsdpfoirazlsx Aaben no. of strokes . Hub/min head swivability . ° +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Schunk Here we offer you a utility separator. Technical data: Outer dimensions: Width: 1325 mm Width control column 565 mm Depth: 1300 mm Shuttle overhang 730 mm Height: 1870 mm Overhang light column top 350 mm Operator height 900 mm Speed: X,Y: linear motor axes 2000 mm/s Z: linear motor axes 1000 mm/s Weight approx. 1500 Kg. Accuracy repeatability: 0,02 mm Position accuracy: 0,02 mm Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Hedpfx Asikauioabsfn Working range Max cutting area X,Y 430 mm 350 mm Max effective size X,Y 430 mm 350 mm LP thickness 0.5 -3.2 mm Power supply 400V / 50 Hz / 16 A Condition: used / used Type: SAR-1300 B Scope of delivery: As shown (Changes and errors in technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: used, 52 used recordings Hfjdpfx Aaowufuvebjn

Condition: good (used), 2 brackets for fixed bed milling machines Sizes: -Square 1: 370x620x2000mm Hfjdpfxsudvh Ie Aaben -Square 2: 370x615x2000mm

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Hsdpfxsfxg T Uo Aabsfn Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: good (used), Clutch gear, gear clutch, slip hub, slip clutch -Manufacturer: Mayr, ROBA slip hub slip clutch Hfjdpsrub Htofx Aabsn -Type: 3/100,210 -Sprocket: Duplex 30 teeth -Dimensions: see photos -Total dimensions: Ø 158 x 70 mm -Weight: 4.4 kg

Condition: used, table length 1000 mm table width 475 mm Hodpfx Asn Nc Nboabsfn table height 145 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Outlet Set 1, Set 2, Turm 3, We are offering the following in our outlet: 1) Our used steel mineral casting tower SMQ202060-R50 as a set for CHF 7,200.– (excluding VAT, payable prior to delivery; original price CHF 16,298.80). The base plate can be ordered separately and will be custom-made to size if required. The set includes the tower with two PowerClamp base rails and various modules: 1x SMQ202060R50, 4x TWPAS1240, 8x M12X40, 2x PCB4050600, 4x PS2F61N34-45, 8x B47HM, 6x PCU29060, 6x PS1R78N49-80, 6x B81, 10x PCU31077. Hodew Dfunspfx Aabjfn 2) Our used mineral casting tower MQ202060R50 as a set at a special price of CHF 6,965.– (original price CHF 16,040.–). The set includes our mineral casting tower, two PowerClamp base rails, and various modules: 1x MQ202060R50, 1x GPL40040-UV, 4x TWPAS1240, 8x M12x40, 2x PCB4050600, 4x PS2F61N34-45, 8x B47HM, 6x PCU29060, 6x PS1R78N49-80, 6x B81, 10x PCU31077. 3) Our used mineral casting tower MK401890R50 at a special price of CHF 3,850.– (original price CHF 9,600.–). The mineral casting tower MK401890R50 is in very good condition. The base plate can be ordered separately and will be custom-made to size if required. Drawings for the towers can be found below (PDF documents).

Condition: good (used), Type Rt 500 G Number 4021 Design: • Clamping surface D = 500 mm • Weight approx. 195 kg Dimensions approx. 700 x 600 x 170 mm Hjdpfx Aaewragujbsfn

Condition: new, Year of construction: 2025, Diameter of bolts in the set – 14 mm. Used for milling, iron working, mechanical and drilling processes. In the set: Extension nuts – 4 pieces Hodpfxsvxtbte Aabofn Flanged nuts – 6 pieces T-slot nuts – 6 pieces Stepped support – Support block, stepped (3 types, 4 pieces each) – 12 pieces Stepped clamp (3 types, 2 pieces each) – 6 pieces 3', 4', 5', 6', 7', 8' stud bolts - 4 pieces each Manufacturer: Cormak

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 272 mm -Holes: Ø 24 mm -Dimensions: see photo technical drawing -Dimensions: 300/125/H50 mm -Weight: 8.9 kg Hfodpewyvbwsfx Aabon

Condition: used, table length 1000 mm table width 475 mm table height 145 mm Hedpfx Asrrzkhjabofn

Condition: good (used), Clamping table, clamping angle, dividing head, rotary table, milling machine table, rotary dividing table -Manufacturer: Stankoimport, round table -Clamping surface: Ø 250 mm -Center hole: Ø 30 mm -Groove width: 12 mm -Dimensions: 495/340/H150 mm Hedpfxswxague Aabsfn -Weight: 54 kg

Condition: new, diameter / mm Cutting (quantity) / weight / kg Rotor type: rotor FK.213.570 11 05.01 Hjdeu Dbz Aopfx Aabjfn MAT number: 000.213.570 Condition: new incl. test report

Condition: good (used), Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Number: 1x clamping angle available -Price per piece Hfedpfxelcfi Hj Aabsn -Dimensions: 220/100/H500 mm -Weight: 12,8 kg/pc.

Condition: good (used), Flat belt pulley, belt pulley, drive pulley, roller pulley Hfodjwuzk Hopfx Aabjn -Pulley: Flat belt pulleys 7 pieces -Width 70 mm -Hole: Ø 18 mm -Dimensions: see photos -Shipping/Price: complete -Dimensions box: 430/210/H115 mm -Weight: 11 kg

Condition: good (used), Clamping table, clamping angle, dividing head, rotary table, milling machine table, rotary dividing table -Rotary table: clamping surface: Ø 120 mm Hsdpfx Aaswuybkobefn -Groove width: 14 mm -Dimensions: 210/160/H140 mm -Weight: 5.7 kg