Condition: excellent (used), Round magnet/permanent Diameter 200 mm Height 93 mm Csbswf Hguevl In Hjgt Mounting surface diameter 210 mm Weight 16.5 kg Stock number (28622)

Condition: good (used), Four-jaw chuck, four-jaw lathe chuck Cgobvedrwmkjl In Hot -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Condition: good (used), Framing table 4000 x 2000 x 360 mm Cgobvl Iouzaafen Het Weight approx. 7000 kg

Condition: used, Year of construction: 2004, Suitable for cleaning coolant oil for grinding carbide. Accesories: 2 filter towers, automatic backwash. container content: 800 l flow capacity max: 80 - 100 l/min. Filter fineness:: greater than 0.003mm Connected load approx.: 4.0kW (400V/50Hz) Cjbjunwg Uovl In Hsgt Dimensions W x D x H: 1650 x 1000 x 2000 mm Weight approx.: 1000 kg colour: light grey

Condition: excellent (used), Large floor plate. Clamping area 8000 x 3000 mm. Thickness 350 mm. 12 x T-Slots. Cobvl Inod Da S As Hjgt Weight approx. 20 t.

Condition: good (used), Year of construction: 2000, Cast iron measuring and marking table with under-table cabinet, STOLLE MT1000. Table: 1000 x 1000 mm Height: 1000 mm Weight: approx. 650 kg In good condition. Cebvswffz Dsl In Hegt

Condition: excellent (used), Vice Hydraulic Vice Manufacturer: Hilma Cgsbvlowf Hdas In Hjt Jaw Width: 125 mm Jaw Height: 43 mm Max. Clamping Length: 220 mm Rotary Plate Height: 140 mm Weight: 43.5 kg Stock Number: (28623)

Condition: good (used), Year of construction: 1997, - Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 21 mm - Material slide length N Cgobvl Inowfd A Te Hjt - Last installed on INDEX DG 20 - Centering device - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm 3 bar loaders are available!

Condition: used, Year of construction: 2022, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. ca. 0,7 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BÜRENER MASCHINENFABRIK - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors Cobvl Inowd Txuj Hegt - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW - Pump power: 5.5 kW, 2,950 rpm

Condition: used, Year of construction: 2003, Suitable for cleaning cooling oil for grinding hard metal. Accessories: 1 filter tower automatic backflushing container content: 500 l flow capacity max: 50-60L/min. Csbvl Insvbz A Ds Hogt Flow rate max: 50-60 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 400 V / 50 Hz Dimensions W x D x H: 1950 x 1000 x 1370 mm Weight approx.: 400 kg colour: Purple

Condition: good (used), Year of construction: 2001, Various clamping cubes with Zero-point clamping systems. Various sizes. All are for larger parts, for example 1000 - 1500 mm or larger. With hydraulic clamping of the Zero Point Clamping Systems. Cgjbocq Nquovl In Hjt All the cubes are fitted with Zero Point Clamping plates. The clamping cubes and clamping plates are made by best precision well named German and Swiss manufacturers. All in excellent condition. 5 units in various sizes.(large sizes only available)

Condition: as good as new (ex-display), Corundum grinding discs 300 mm Ø x 40 mm x 25 mm Ø, 4 pieces quality 31A60M6V511 and 4 pieces quality 10A24Qu4 Corundum grinding discs 300 mm Ø x 40 mm x 76 mm Ø with recess 125 mm Ø x 20 mm, 2 pieces quality 31A60M6V511 and 2 pieces quality 10A24Qu4V1 Corundum grinding discs 200 mm Ø x 32 mm x 51 mm Ø, 3 pieces quality 31A60M6V511 and 3 pieces quality 10A24Qu4V1 Cobvl Ijuv Ecbon Hogt

Condition: excellent (used), Collet chuck/quick-change inserts Cone 38 mm Collet cone diameter max. 27.7 mm Collet cone diameter min. 24.2 mm Cgjbvl Inswf Ha Is Het Length 45 mm Outer diameter 30 mm Stock number (28603)

Condition: good (used), Year of construction: 2000, - Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 17 mm Cgsbvjwfdwkol In Hjt - Material slide length N - Last installed on INDEX DG 12 - Centering device - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

Condition: as good as new (ex-display), Year of construction: 2023, spindle speed (min.): 40,000 rpm, Model: IKON1510 Manufacturer: Swiss Dynamics Control: Fanuc 0i Plus Year of manufacture: 2024 Location: Germany Options: - Main spindle HSD 6.5 KW / 40,000 RPM - Schneeberger direct position measuring system - Tool magazine for 36 tools HSK E32 - Tool cooling system with 5-liter MQL container - Vacuum system for part clamping - Blum ZX & Blum TC5 measuring system Technical specifications Travel range X-axis approx. 1500 mm Y-axis approx. 1750 mm Z-axis approx. 240 mm Table size approx. 1500 x 1500 mm Rapid traverse linear axes 60 m/min Max. workpiece weight approx. 1000 kg Max. speed approx. 40,000 rpm Chip disposal concept: integrated central Chip trolleys – 2 pieces Rigid steel construction – 2300 kg Installation dimensions: 2400 mm x 2920 mm x 2150 mm (machine) FANUC 0i – Plus HMI – ergonomic 21.5-inch touchscreen control panel Features: - Program management - Tool management - 3D simulation - Status - Editor with G-code programming language - Manual operating cycles - Camera: This function is used to manually set the workpiece origin. Workpiece setup can be done very quickly, easily, and safely. You can move your finger along the contour of the displayed image to define the zero point and the rotation of the workpiece. - AICC 2 – 1024 Lookahead Block Advance - High-speed machines are required to maintain speed and stay ahead of a program - Acceleration in Dynamic Mode – 0.15 G Fine / 0.4 G Standard / 1 G Fast - Fine Surface Option - Pitch and Straightness Compensation - Pitch Compensation (for compensating linear axes) Cgebvl Inswdrrys Hot - Straightness Compensation (for balancing linearity in the XYZ combination) Vacuum Technology - IK1515 (16 Zones / 180 mc / Filter) - Rotary Vane Vacuum Pump - Suction Filter - Motor Protection Switch - 3-Phase Contact - 5 m Vacuum Hose - 4 x 4 Row Matrix Configuration - Y-Filter for Each Zone (Subject to errors in technical specifications and information)

Condition: used, Year of construction: 2014, Suitable for cleaning cooling lubricant and oil-based grinding mist. Fan power: approx. 2400 m³ / h Suction power up to: 1200 m³ / h Noise level: 75 dB A Pressure difference: 840 Pa Connected load approx.: 3.4 A (400 V / 50 Hz) Dimensions L x W x H: 1130 x 625 x 610 mm Csbvl Injv Rbf Rj Hjgt Weight approx.: 130 kg colour: Gray

Condition: new, Tool holders HSK-100 x 16 x 100 Cjbvljfgb Rqs In Hegt (10 units unused)

Condition: used, 314593, HLM 100-H, Schunk, lifting module HLM, L=250mm Cjbvl Inot Rt Rbe Hsgt Model: 314593 Type: HLM 100-H Condition: Used

Condition: used, Year of construction: 2001, Suitable for cleaning cooling lubricant and oil-containing grinding mist. Fan power: approx. 2400 m³ / h Suction power up to: 1200 m³ / h Noise level: 75 dB A Pressure difference: 840 Pa Connected load approx.: 6.0 / 12 KV (230 V/50/60 Hz) Cgobjvdb A Aevl In Hot Dimensions L x W x H: 1130 x 625 x 610 mm Weight approx.: 65 kg colour: Gray air flow rate: approx. 500 m³/h Performance : 140 A noise level: 75 dB A

Condition: new, Tool holders HSK-100 x 25 x 115 2 units unused Cgsbvl Inefgb Rrj Hjt

Condition: used, R3G 250-AK 41-71 + D99C9S2F3 / R3G 250 AK 41 71 + D99C9S2F3 / R3G250AK4171 + D99C9S2F3, AAF International B.V. Filter Module Power FFU Slave Model: R3G 250-AK 41-71 + D99C9S2F3 Condition: Used Cgsbeq S Tv Uevl In Hst

Condition: used, Year of construction: 2008, Suitable for cleaning cooling oil for grinding hard metal. container content: approx. 500 l Filter performance: approx. 180 l/min Cgebvl Isuxnmuen Hot Filter fineness: >0.003mm Connected load: approx. 4 kW (400 V/ 50Hz) Dimensions: W x D x H approx. 1600 x 1000 x 1000 mm weight: approx. 1000 kg mass: about 1000 kg colour: light gray

Condition: used, Year of construction: 2007, Suitable for cleaning cooling oil for grinding hard metal. Accessories: 1 filter tower automatic backflushing container content: 500 l flow capacity max: 50-60L/min. Flow rate max: 50-60 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 400 V / 50 Hz Dimensions W x D x H: 1950 x 1000 x 1370 mm Cobvl Iov Sapdsn Hjgt Weight approx.: 400 kg colour: Purple

Condition: used, Year of construction: 2010, Suitable for cleaning cooling oil for grinding hard metal. Accessories: 2 filter towers, Automatic backflushing, Chiller container content: 800 l flow capacity max: 60 l / min. Flow rate max: 60 l / min. Filter fineness:: greater than 0.003 mm Cgjbvl Insvbf R Ej Hjt Connected load approx.: 9.0 kW (400 V / 50 Hz) Dimensions W x D x H: 1700 x 1100 x 2400 mm Weight approx.: 710 kg colour: light grey

Condition: used, Year of construction: 2000, Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator. container content: 4000 l Flow rate max: approx. 360 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 9.0 kW (400 V / 50 Hz) Dimensions W x D x H: 6000 x 1200 x 1650 mm Weight approx.: 2000 kg Cobvl Inov N Iuis Hjgt colour: light grey