Used cNC lathes 300-349mm turning diameter for sale (136)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Dsdpfx Adsuwc T Hedsla Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition; inspection during operation is possible by arrangement. Bar feeder length: 1,500 mm. Equipped with Fanuc control system, new linear guides and covers installed in 2024. Runs without issues, accuracy within 0.02 mm. Dsdpfoxy N Ihjx Addjla

Condition: like new (used), Year of construction: 2020, operating hours: 170 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 510 mm, turning diameter: 390 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 590 mm, spindle motor power: 15 W, Year of manufacture: 2020 Dedpfx Adjxz Rlqodola CNC: Fanuc 0i-T Plus X-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 590 mm SPINDLE AND SUB-SPINDLE POWER: 15/11 kW Spindle/counterspindle MOTOR TORQUE: 224 / 58.5 Nm SELF-CENTERING CHUCK M/CM: 8″/6″ SPINDLE/COUNTERSPINDLE SPEED: 4500/5000 RPM SPINDLE/SUB-SPINDLE NOSE: A2-6 / A2-5 X-AXIS RAPID TRAVERSE: 30 m/min Z-AXIS RAPID TRAVERSE: 36 m/min B-AXIS TRAVEL: 570 mm TURRET: 12 MOTORIZED POSITIONS MAX TURNING DIAMETER: Ø 390 mm MAX TURNING LENGTH: 510.5 mm MAX BAR CAPACITY: Ø 65 mm MAX SWING DIAMETER: Ø 800 mm MACHINE WEIGHT: 4,200 kg OVERALL DIMENSIONS: 3847 x 1987 x 1700 mm

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. Dedpfxjxwdw Eo Addjla In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 520 mm, turning diameter: 310 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, Sinumerik 810D Powerline with Shopturn CNC control 3-jaw chuck Schunk (diameter 210mm) 12-fold turret head (VDI 30 taper) C-axis driven tools Dodpfxexvy Ahe Addola tailstock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser über Bett / max rotary diameter over bed 600 mm max. Umlaufdurchmesser über Schlitten / max. rotary diameter over sledge 360 mm max. Drehdurchmesser / max. turning diameter 310 mm max. Drehlänge / max. turning length 520 mm Abstand zwischen den Spitzen / distance between centers 680 mm Planweg (x) / cross way (x) 210 mm Längsweg (z) / longitudinal way (z) 610 mm max. Stangendurchmesser / max bar diameter 65 mm Drehzahlbereich / spindle speed 0-4200 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 5000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang x,z / rapid feed x,z 24,24 m/min Antriebsleistung Spindel / drive capacity spindle 18 kW Gewicht der Maschine ca. / weight 3900 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Machine type: CNC lathe Manufacturer: Okuma Type: LU15-M Year of manufacture: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: from stock Long turning length - 1000 mm Towable tailstock - automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment enables this used machine to process long turning lengths of up to 1000 mm. Effective production is also possible thanks to the towable tailstock - automatic, the tool breakage / wear control, the partial hollow clamping device, the K pump and the dialog programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machine equipment Spindle motor VAC built 22/15 kW Long turning length – 1000 mm Towable tailstock – automatic G152 3-jaw chuck Forkardt, diameter 250 mm Steady preparation B-turret Partial hollow clamping device Dialog-IGF K-pump Tool breakage/wear control Chip conveyor Technical data Max. turning diameter: 340 mm Max. turning length: 1000 mm Travel X-axis: upper 260 mm (170+90); lower 140 mm (90+50) Travel Z-axis: upper 1,040 mm; lower 1.015 mm C-axis travel: 360° Dledpjx Afz Aefx Addea Spindle – number of travel steps: 2 – automatic Bore diameter: 62 mm A-turret (upper): 12 tools, all M-tool compatible, VDI 40 B-turret (lower): 8 tools, VDI 40 Rotating tool speed: 45~4500 min -1 Rapid feed: m/min X:15, Z:20, C:200 min -1 Tailstock quill diameter: 90 mm Tailstock quill stroke: approx. 100-120 mm Machine dimensions without accessories LxW: approx. 4800 x 2200 mm Machine height: approx. 2030 mm Weight: approx. 6900 kg Optional Transport organization and implementation Machine delivery and installation Machine commissioning and production-ready handover

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Dledpfjt E Hvgsx Addsa Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: used, Year of construction: 2015, TAKISAWA TS4000YS year 2015 CNC control FANUC 32i-MODEL B Max. turning diameter 315 [mm] Max. swing over bed 600 [mm] Max. Turning length 735 [mm] Stroke X axis 267 [mm] Stroke Z axis 840 [mm] Stroke Y axis -50 [mm] / +70 [mm] Stroke A axis 780 [mm] Rapid traverse rate X axis 30000 [mm/min] Rapid traverse rate Z axis 30000 [mm/min] Dljdpfx Adowq Sf Tedea Rapid traverse rate Y axis 10000 [mm/min] Rapid traverse rate A axis 30000 [mm/min] Spindle nose A2-8" Max. bar diameter 82 [mm] Spindle throughbore 94 [mm] Max. spindle speed 4200 [rpm] Spindle power 22 [kW] Counter spindle nose F140 Counter spindle throughbore 53 [mm] Max. counter spindle speed 6000 [rpm] Counter spindle power 11 [kW] Max. tool holder cross-section 25 [mm] Number of tool stations 15 Number of tool stations driven 15 Max. speed driven tools 6000 [rpm] Lubrication tank capacity 370 [l] Total power required 37 [kVA] Supply voltage 400 [V] Chip conveyor with machine 5 live tool holders Weight 6700 [Kg]

Condition: good (used), Year of construction: 2007, functionality: fully functional, Description: Dledjxyix Hopfx Addja The machine is in good technical condition, with the possibility of testing upon prior agreement. FANUC 18i-TB control system. Spindle speed: 42-4200 rpm. Main motor power: 11 kW. Turret with 12 positions (6 positions for driven tools). KITAGAWA hydraulic cylinder. Collet chuck. C-axis / Y-axis. Parts catcher. Chip conveyor. Grundfos cooling unit. Maximum spindle bore: 51 mm. Maximum machined diameter in chuck: 320 mm. Interface for bar feeder. Machine and accessory dimensions (W x L x H): Machine: 1800 x 2350 x 2200 mm Coolant tank: 2150 x 1100 x 700 mm Chip conveyor: 2100 x 500 x 1400 mm Machine weight: 3500 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 750 mm, turning diameter: 370 mm, spindle bore: 82 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 267 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 840 mm, spindle motor power: 22,000 W, rotational speed (max.): 6,000 rpm, total height: 2,300 mm, total length: 3,000 mm, total width: 2,140 mm, turning diameter over bed slide: 370 mm, overall weight: 6,200 kg, bar diameter (max.): 82 mm, Equipment: documentation/manual, TAKISAWA TS-4000YS FANUC 32i-B JAPAN Made in Japan High rigidity (6200 kg weight, 30° inclined machine bed, slide rails) - Built-in main and sub-spindle - High rigidity and built-in main and sub-spindle enable precise and vibration-free machining - 22 kW main spindle with 618 Nm max. torque - High performance and solid machine bed enable high-volume chip removal - Y-axis Technical data: Capacity Max. swing diameter Ø 600 mm Max. turning diameter and length Ø 370 x 750 mm Trought hole: Ø 82 mm Spindle Axle height from the ground 1,140 mm Spindle bearing/bore diameter Ø 140 / Ø 90 mm Spindle head A2-8 Spindle speed 4,200 rpm C-axis resolution 0.001 ° Sub spindle Axle height from the ground 1,140 mm Spindle bearing/bore diameter Ø 90 / Ø 53 mm Spindle head F-140 Spindle speed 6,000 rpm C-axis resolution 0.001 ° Strokes and rapid traverses Strokes X-axis = 267 mm Z-axis = 840 mm Y-axis = - 50 ~ +70 mm A-axis = 780 mm Rapid traverse X-axis = 30 m/min Z-axis = 30 m/min Y-axis = 10 m/min A-axis = 30 m/min Power Spindle motor (30 min. / 100 % ED) AC 22 / 15 kW Max. torque: 618 Nm (S3 25%) Driven tools Number of tool positions on the turret 15 pcs Max. tools speed 6,000 rpm Drive power (30 min. / 100 % ED) 7.5/3.7 kW Maximum torque 48 Nm Tooling Driven tool positions 15 pcs Tool cross-section 25 x 25 mm For hole machining Ø 40 mm Dimensions Height 2,300 mm Depth (without chip conveyor) 2,140 mm Width (without chip conveyor) 3,000 mm Dljdpfjv T R Elox Addja Net weight 6,200 kg Including options: FANUC Data SERVER LNS Barfeeder interface Part catcher chip conveyor Renishaw tool mesaurement (main and subspindle also) Kitagawa BB-250 3 jaws hydraulic chuck – main spindle Kitagawa SS1881K hyraulic holow cylinder – main spindle Kitagawa B-206 3 jaws hydraulic chuck – sub spindle Kitagawa SS12640K hyraulic holow cylinder – sub spindle 15 pos turret High power coolant pump (520W) Work lamp 3-3 pcs live tool (radial-axial) Live center some static tool holder NOT INCLUDING: 2 pcs SMW chuck (possible buy) transporting

Condition: excellent (used), Year of construction: 2000, CNC Lathe MAZAK SUPER QUICK TURN 200 Year of manufacture: 2000 Working area: Max. swing diameter: 525 mm Max. turning diameter: 350 mm Max. turning length: 514 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Turret: Standard version: 12 stations Travel: Turret travel: X-axis: 190 mm Z-axis: 535 mm Dodjxvb E Djpfx Addjla

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 600 mm, turning diameter: 370 mm, Machine Type: CNC Turning Machine Manufacturer: Okuma Model: LU300-2ST Year of Manufacture: 2005 Control: OSP-E100L Availability: In stock Machine Equipment: - Parts conveyor belt and collection tray – workpiece chute with removal conveyor, including electrical kit - 2 turret disks with VDI40 (12 + 8 stations) - Power chuck cylinder for hollow spindle – pull tube bore 52 mm - Expansion kit “D” – Kit one-touch IGF-D - Chuck open/close while spindle is running via M-code - Reinforced coolant pump 8 bar - Coolant can be switched on/off at turret A and B via M-function - Interface for bar feeder connection - Chip conveyor Technical Details: - Swing over bed: 530 mm - Swing over cross slide: 380 mm - Distance between centers: 600 mm - Max. turning diameter: 370 mm - Max. turning length: 600 mm - X-Axis travel: upper 260 mm / lower 140 mm - Z-Axis travel: upper 640 mm / lower 615 mm - Rapid traverse X-Axis: 20,000 mm/min - Rapid traverse Z-Axis: 25,000 mm/min - Spindle speed: 45 ~5,000 rpm - Spindle bore: 62 mm - 2 tool turrets: upper 12 stations, lower 8 stations - Spindle power: 22/15 kW - Machine dimensions (L x W): approx. 2950 x 2050 mm - Machine height: approx. 2010 mm - Weight: approx. 6,500 kg Options: Djdpfx Asxz Eqbeddela - Organization and execution of transport - Machine installation and placement - Machine commissioning

Condition: excellent (used), CNC Lathe with y-axis DMG MORI - CTX BETA 800 4A MACH-ID 9282 Make: DMG MORI Dedsxuqw Hopfx Addsla Type: CTX BETA 800 4A Control: Siemens 840 D-SL Year: 2012 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, DOOSAN LYNX 2100 LSYA Year of manufacture: 2021 Control: Siemens SINUMERIK 828D touch Turning diameter: 300 mm, Turning length: 510 mm, Axis travels: Z - 560 mm X - 205 mm Y - 105 mm Bar capacity: 51 mm, Hydraulic chuck: 6 inch 4500 rpm, 24-position turret, Spindle motor: 12.5 kW, Dedexny Axspfx Addola Milling: 6000 rpm, 2x C-axis Sub spindle -part conveyor, -part catcher, tool probe, chip conveyor.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: TF250023, turning length: 1,100 mm, turning diameter: 320 mm, TECHNICAL DETAILS Turning diameter: 320 mm Turning length: 1,100 mm Djdpsxrc D Tefx Addsla MACHINE DETAILS Control: SEICOS EQUIPMENT Tailstock

Condition: used, Year of construction: 2009, Technical details: turning diameter: 270 -300 mm turning length: 710 mm total power requirement: 43 kW weight of the machine ca.: 8,5 t Dedpfx Adew Dud Esdola dimensions of the machine ca.: 3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools – the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one. *

Condition: good (used), Haas ST-10 CNC lathe, year 2017. Djdpfx Aexwncxeddela

Condition: used, Year of construction: 2006, with C-axis with driven tools Dlodpfx Aer E Amgeddsa FANUC 18T-C control turning diameter -380 mm turning length 490 mm Spindle speed -3,500 rpm Upper turret holder with 12 positions, 6 of which are driven Tool presetter Chip conveyor

Condition: used, Year of construction: 2010, Technical details: spindle passage: 92 mm turning length: 1000 mm z-axis: min.: 404 mm z-axis: max. 1130 mm facing movement (x-axis): min./max.:15 / 335 mm control: Sinumerik SL840D Djdewf Nraopfx Addjla max. torque on the spindle: 2500 Nm tool turret: 12 tools axial operating pressure: 6,0 bar rapid traverse: 20 m/min total power requirement: 88 kVA dimension machine xH: ca. 4,45 x m dimensions of the bar loader L-W-H: ca. L: 5,7 x B: 2,65 x H: 2,4 m CNC lathe with bar loader - inclined bed lathe -SL 840D control with NCU software 2.6, system software 1.4, store turn software 6.4, with one orientable C-axis, without driven tools -KNCS 260-72 chuck, SMW Autoblok -Clamping force generator via clamping cylinder VNK-200/86 / SMW Autoblok -Measuring system Fa. Heidenhain -Sauter VDI50 tool disk turret, electric drive Bar loaderMaster 80HF, type 33LL: -Dimension round material min./max.: Ø 20mm / 80mm -Minimum length of the workpiece: 33-38-43 to 1000mm -Maximum length of the workpiece: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm -Feed speed (adjustable) 150mm/sec. - Return speed (adjustable) 950mm/sec. -max. offcut length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm -min. remnant 120mm Chip conveyor / hinged belt from Richter, type SP 450/63 -Discharge height = 1000mm, discharge side right Accessories: -div. tool holders VDI 50 -sizing adapter SK50-> VDI 50 -Power chuck Hainbuch Toplus Kombi Ax-zug GR100 -div. sleeves, guide jaws for bar loader Ø 20 - 75mm i.D. *

Condition: good (used), Year of construction: 2012, For sale is a ROMI C 420 cycle lathe, year 2012, Siemens control, extensive accessories. Dsdpfx Adexnr Nwsdola

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock Dsdpfxoxxi Ulo Addola

Condition: used, Year of construction: 1995, LATHE DAEWOO PUMA 12 L CNC FANUC: O – T MAX. SWING DIAMETER: 570 mm MAX. TURNING LENGTH: 1,020 mm MAX. TURNING DIAMETER: 480 mm BAR CAPACITY: 90 mm SPINDLE SPEED: 12 – 2,500 RPM ASA – 8 POWER CHUCK: 315 mm TRAVELS: X: 260 mm Dlodpfjxwvxnjx Addoa Z: 1,050 mm TOOL TURRET: 12 POSITIONS WEIGHT: 6,000 kg CHIP CONVEYOR

Condition: used, Year of construction: 1999, turning diameter 450 mm turning length 380 mm Dlsdpfxovanvns Addoa control FANUC

Condition: excellent (used), CNC lathe Smec PL2000M, year 2021, C-axis, driven tools, 8-inch chuck, 65 mm bar passage Dlsdpsw Hukksfx Addea

Condition: ready for operation (used), Year of construction: 1998, Mazatrol T plus Spindle bore 40 mm Spindle speed 5000 rpm 8-position turret Djdpfx Aexyh Efsddela No tailstock Weight 3500 kg