Used machining centers (horizontal) X-axis travel 600-799mm for sale (136)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,339 h, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: 840D Solution line, table load: 600 kg, number of axes: 4, This 4-axis HELLER H2000 horizontal machining center was manufactured in 2017. It features a Siemens 840D Solution Line control, rapid traverse of 60,000 mm/min, and a spindle speed of 10,000 rpm. The machine can handle workpieces up to 720 mm in diameter and 850 mm in height, with a maximum table load of 600 kg. Consider the opportunity to buy this HELLER H2000 horizontal machining center. Contact us for more information about this machine. Additional equipment • Chip conveyor • Coolant filtration with paper filter KF 400 • Through-spindle coolant, 50 bar • Work area flushing Machine Benefits Technical Machine Benefits • Acceleration: 8 m/s² • Standard color: grey-white / sand grey / ultramarine blue • Max. Workpiece diameter: 720 mm • Max. Workpiece height: 850 mm • Nc rotary table, indexing 360000 × 0. 001° • Clamping station, manually operated pallet, 4 × 90° • 2 pallets, 400 × 500 mm • Tool magazine positions: 54 Extra Information Operating mode: Mode 3 Electrical: 50 Hz, 400 V Hydraulic interface for tool clamping, 5-fold, 60 bar Additional hydraulic control line Hydraulic connection kit with couplings (2 units) Nosepiece for multi-spindle head Infrared receiver for RENISHAW probe Hnedpjyarzlofx Airsk RENISHAW probe Drill breakage detection system Signal tower (red-yellow-green) Technology cycles package Additional operating panel at tool magazine

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 610 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 15,000 rpm, number of axes: 4, This 4s Kitamura Hx400ig horizontal machining centre was manufactured in 2018. It features impressive X, Y, and Z axis travels of 610 mm, a spindle speed range of 40 – 15,000 rpm, and rapid traverse speeds of 60 m/min. The machine is equipped with box ways for maximum rigidity and offers optional features such as a continuous 4th axis and automatic door opening. Consider the opportunity to buy this Kitamura Hx400ig horizontal machining centre. Contact us for further details. • Tool magazine capacity: 62 positions (optional) • High-pressure coolant pump 70 bar with through-spindle coolant (optional) • Tool change time: 1.3 s / 2.5 s minimum • Rapid traverse (X/Y/Z): 60 m/min (2,362 ipm) • B-axis rapid speed: 125 min⁻¹ (45,000 deg/min) • Machine equipped with box ways for maximum rigidity • Continuous 4th axis (B-axis) (optional) • Automatic door opening/closing for automation (optional) Hedpfxjyh N Dws Airenk Additional equipment • External hydraulic clamping pump for automatic workpiece clamping (never used) (optional)

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 3,300 mm, table width: 4,000 mm, overall weight: 15,000 kg, product length (max.): 4,850 mm, number of axes: 4, This 4-axis Starrag Heckert CWK500D was manufactured in 2002. It features an impressive X-axis travel of 750 mm, Y-axis travel of 750 mm, and Z-axis travel of 700 mm. The machine includes a robust pallet size of 500 × 500 mm and a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Starrag Heckert CWK500D horizontal machining centre we have for sale. Contact us for further details. • B-Axis: 360° continuous rotation (0.001° resolution), max speed 25 rpm; indexing time (90°) approx. 1.2 sec (rotary table completely overhauled by manufacturer FTW in 2022) • Rapid Traverse: 40 m/min • Pallet Size: 500 x 500 mm • Max Pallet Load (centered): 500 kg • Automatic Pallet Changer: 2 pallets with a pallet change time of approx. 9 sec • Tool Magazine (Chain Magazine): 80 tool positions • Max tool diameter: 160 mm (with free adjacent pockets) • Max tool diameter: 85 mm (with adjacent pockets occupied) • Max tool length: 400 mm • Max tool weight: 10 kg • Spindle taper: HSK63 • Spindle Speed: up to 15000 rpm • Power: up to 37 kW • Torque: up to 350 Nm Hedoynlcrjpfx Aironk • Internal coolant supply (IKZ): 50 bar • Coolant system: Belt filter

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) Hnjdoyi Ekfjpfx Airsk • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, total height: 2,864 mm, overall weight: 11,500 kg, spindle speed (max.): 15,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine. • Spindle center to pallet top: 50–810 mm • Spindle nose to pallet center: 135–895 mm • Table/pallet: 500 × 500 mm; max load 500 kg; indexing 1° • Workpiece capacity: max Ø800 × 1,000 mm • cutting feed 1–60,000 mm/min; table indexing motor 3.0 kW Hodpfox D Rrcex Aironk • Tooling: tool shank MAS403/BT40; pull stud MAS 2; magazine 64 tools; random selection • floor space 2,700 × 4,710 mm Additional equipment • Chip conveyor • Through-spindle coolant (CTS) • Tool presetting at table edge • Provision for Renishaw probe • Shower/washdown system

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 800 mm, controller manufacturer: FANUC, controller model: 16i, spindle speed (max.): 20,000 rpm, number of axes: 4, This 4-axis MCM CLOCK 800 MP4 was manufactured in 2000. It features a Fanuc 16 I control, X-axis travel of 700 mm, Y-axis travel of 700 mm, Z-axis travel of 800 mm, and a B-axis rotation of 366°. Equipped with a high-speed spindle at 20,000 rpm and a high-pressure system at 65 Bar. It includes a chip evacuator and a tool magazine with 72 positions. Contact us for more information about this machine. • B-axis rotation: 366° (to be confirmed; source listed 3,660,000) • Number of pallets: 4 • High pressure: 65 bar • Table size: 630 x 630 mm • Tool magazine: 72 positions Additional equipment Hodpfx Aieyguqverjnk • Chip evacuator Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series 0i-MC, table width: 500 mm, table length: 500 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This Leadwell LCH-500 Horizontal Machine Center was built in the year 2006. It is equipped with a Fanuc Series 0i-MC control unit and has 3 axis. The machine has a spindle speed of 10000 rpm and is in good condition. Hedpfxeyi Elvs Airsnk Additional equipment • Chip conveyor Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits • Distance table-spindle nose 50-660 mm • Iso 40 spindle connection • Tool magazine 40 positions • Coolant pressure 20 bar

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis Matsuura H plus 405 was manufactured in 2004. It features a pallet size of 500 × 500 mm, X/Y/Z-axis travel of 600 mm each, and a B-axis indexed at 1°. The spindle operates at 12,000 rpm with an ISO 40 taper. It includes a high-capacity tool magazine for 240 tools and supports 24 pallets with dual loading/unloading stations. Consider the opportunity to buy this Matsuura H plus 405 horizontal machining centre. Contact us for more information. • Pallet size: 500 × 500 mm • Number of pallets: 24 pallets • Loading/unloading stations: 2 • Tool magazine capacity: 240 tools • Probing system: Yes (touch probe) Hnedpfx Aiox Utv Usrok • Tool presetting: Yes • Tool breakage detection: Laser system • Spindle taper: ISO 40 (DIN 69871) • Spindle speed: 12000 rpm • High-pressure coolant: 50 bar with paper filter • Machine condition: Available for any test / under power

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,804 h, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, table load: 350 kg, overall weight: 3,400 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 90, tool weight: 10,000 g, number of axes: 4, This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine. Additional equipment • Coolant Type/Content: Emulsion (internal & external) / approx. 1100L • Coolant Unit: Knoll with drum filter 30, 40, 50 bar via M-command • Machine Accuracy: VDI / DGQ 3441 • Renishaw Measuring Probe • Tool Breakage Detection • Drum filter • Pallet Sequential Operation • Enclosed Work Area Enclosure • Network Connection • Technical Documents and Layout Plan available Machine Benefits Qualitative Machine Benefits Hedpfxsx D H S Es Airsnk • Some hydraulic and pneumatic hoses replaced • Lt module replaced in the control cabinet • Drum on the knoll system replaced • Regular maintenance performed • High operational efficiency with rapid pallet and tool change times • Comprehensive maintenance records ensuring reliability and accuracy • Equipped with a pallet storage space (4 spaces) • Enhanced safety features with accident prevention regulations compliance Technical Machine Benefits • Torque 100% / 40% duty cycle: 124 nm • Motor power 100% / 40% duty cycle: 13 kw • B-axis (360 x 0. 001°) 60 rpm • Table/pallet size (lxw): 6 pallets 500x400 mm • Table/pallet type: t-slots according to din 55201 • Pallet changer / setup station / storage location: yes / yes / yes (4 storage locations) • Pallet change / tool change time: 6 seconds / 5 seconds • Tool magazine type: chain magazine • Total power requirement: 20 kw • Hydraulic system motor and pump replaced Extra Information Machine still under power Dimensions Machine Depth 5000 mm

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 4, This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details. • Pallet system: Dual pallet; size 500 × 500 mm; max load ≈ 500 kg • Tool system: Magazine 40 tools (optional 60 / 120); tool-to-tool ≈ 0.9 s; chip-to-chip ≈ 2.8 s Hnedpfx Aioyh Hzyerjk • B-axis: Continuous 360°; indexing resolution 0.001° • Rapid traverse (X/Y/Z): ≈ 60 m/min • Accuracy/Construction: High-precision linear guides; thermal displacement control system; glass scales (depending on configuration) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system Two spindles Number of controlled axes: 4 Maximum spindle speed: 17,500 rpm Hnedpfx Aoykumxjirek Spindle power: 18 kW X-axis travel: 400 mm Y-axis travel: 700 mm Z-axis travel: 400 mm Power consumption: 68 kVA

Condition: used, Year of construction: 2013, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Hnsdpfx Aisytc Nmjrok Spindle taper CAT 40 Spindle speed 18.000 1/Min Spindle motor 30/22 kW Magazin capacity 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2017, 4 axes Travel: X = 730 mm, Y = 730 mm, Z = 880 mm Tool holder: HSK-A63 Pallet changer / shuttle table Number of tool stations: 40 Hnodpfxsyn Drxs Airsk

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Hnedpfxeq Ui Hqj Airek Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, spindle speed (max.): 24,000 rpm, Order no. 5.3-745 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 Hedpfx Ajrairwoirjnk CNC control Sinumerik 840D NC rotary table B-axis Magazine for 80 tools Pallet changing device, 2 pallets 400mm x 400mm Internal coolant supply IKZ chip conveyor Coolant device CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 80 tools pallet changing device, 2 pallets 400 mm x 400mm coolant through spindle device IKZ chip conveyor coolant device Technische Daten / technical details: X-travel longitudinal 650 mm Y-travel vertical 650 mm Z-travel cross / Z-travel cross 680 mm B-axis / B-axis 360 ° Spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 24000 Upm /rpm Werkzeugplätze / tool places in changer 80 Gewicht der Maschine ca. / weight approx. 13000 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2015, operating hours: 43,000 h, functionality: fully functional, machine/vehicle number: 19978, travel distance X-axis: 660 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Fanuc, controller model: 30i, workpiece height (max.): 850 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 400 kg, operating hours of spindle: 7,000 h, spindle mount: MK 4, number of spindles: 1, This machine is an excellent production machine. For several reasons, we have to part with this machine earlier than planned, as we need to install a 5-axis machine in its place. Otherwise, we would certainly continue using it for many more years. Hjdpfx Asywggljirenk

Condition: good (used), Year of construction: 2007, Equipment: chip conveyor, OKK HM400, used as a stand-alone machine for small batch and urgent jobs. Still fully operational and available for inspection by appointment. Immediately available. The machine will be cleaned prior to delivery. We can load the machine from our location in Uden. Hedpfx Asyw Iameironk

Condition: good (used), Year of construction: 2014, functionality: fully functional, number of spindles: 1, number of slots in tool magazine: 60, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical specification: - Horizontal spindle - Spindle HSK-A63 - Spindle torque 240 Nm (to be confirmed) - 4-axis machining Hedpfx Aioyrfxhersnk - ATC for 60 tools - Pallet changer (2 pallets) - Pallet size 500x500 mm - Coolant chiller - Coolant filtration system by Knoll - Coolant pressure 50 bar through spindle - Fanuc control system - Chip conveyor - Robot interface - Linear measuring systems (scales) - Manufactured in 2014

Condition: excellent (used), Year of construction: 2007, CNC Control: MSX-501III X axis mm: 730 Y axis mm: 730 Z axis mm: 850 B axis mm: 0.001 Hnodjythprepfx Airsk Pallet size mm: 500 x 500 Number of pallets: 2 Table load capacity kg: 500 Cutting feed mm/min X, Y, Z: 50,000 Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 14,000 Spindle power kW: 22/18.5 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Tool magazine positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent pockets empty: 140 Max. tool length mm: 500 Max. tool weight kg: 8 Coolant tank capacity l: 760 Through-spindle coolant bar: Yes Equipment Chip conveyor Internal coolant Rigid tapping Manuals, electrical diagrams, etc.

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 710 mm, torque: 201 Nm, controller manufacturer: Siemens, controller model: 840D SL, table width: 500 mm, table length: 400 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 50 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 50, mount diameter: 100 mm, Equipment: chip conveyor, rotational speed infinitely variable, Year of construction: 2017 Control unit Siemens: 840 D SL Spindle: SC 100 12000 1/min, 46kW, 201 Nm Tool clamping system: HSK 100 Tool magazine / places: Chain / 50 Rotary table: 3+2 (360.000° X 0,001°) Coolant unit: Interlit TMF 300; IKZ 50 bar, (work area flushing) Hnjdpfx Aieyk D U Sersk Positioning range XYZ (mm): 710 / 750 / 710 Pallet size (mm): 400 X 500 Workpiece clamping: Hydraulic 200 bar Additonal options, Specifics: Receiver for wireless measuring probe (RENISHAW); Pneumatic unclamp check at workpiece loading station; location check at workpiece loading station; Screen blow-off device for operator door; Fast drill fracture sensing (SBBK); status lamp; Integrated process monitoring (IPM) + Monitoring function to minimise machine damage in case of collision; Interface for exhaust system; exhaust system; Scraping conveyor for wet machining; interface robot loading; MSK multi spindle head; Balluff tool ident Format HL 06;

Condition: excellent (used), Year of construction: 2009, Horizontal Machining Center DMG Deckel Maho DMC65 H duoBlock Control: Heidenhain iTNC 530 Year of manufacture: 2009 Travel ranges: X-axis: 650 mm Y-axis: 700 mm Z-axis: 700 mm B-axis: 360° Spindle taper: ISO 40 Tool magazine: 120 positions Spindle speed: 12,000 rpm Chip conveyor Coolant system with 600 l filter and 40 bar 2-station pallet changer 3D touch probe (Renishaw) Blum laser Hnedpfx Aeylihteirek New Weiss spindle in 2022

Condition: used, Year of construction: 1998, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control Siemens type Millplus Table dimensions 630x500 mm tool taper ISO 40 Cooling through the spindle 40 bar Tool changer 60 Pos. no. of tables 2 Milling head automatically swivels horizontally/vertically The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Hjdpfxoyutv To Aironk

Condition: used, Year of construction: 1996, x-travel 600 mm y-travel 560 mm z-travel 560 mm Control Siemens size of pallet 400x500 mm Table load 300 kg feed 40.000 m/min spindle speed: 20-8000 U/min spindle taper ISO 40 Spindle capacity 13/20 KW Torque 191 Nm 4-axis horizontal machining center. Dual pallet changer. B-axis table indexing 0.001°. B-axis rapid traverse 40 rpm. KNOLL coolant system with filter and chip conveyor. 40 bar coolant supply via collar. Good condition. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Hedpfxsyutu Ao Airenk Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2004, functionality: fully functional, Model Year: 2004 Width: 500 mm Hedpfx Aox Tzn Noirsnk Length: 500 mm Height: 500 mm Number of Axes: 4 Tool Holder: BT40 Spindle Speed (RPM): 15,000 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 2008 Width: 600 Length: 600 Height: 600 Number of axes: 4 Hjdpfsx Tzmxsx Airenk Holder: SK40 Spindle speed (rpm): 15,000 Processable material types: Steel, Aluminium, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek