Used machining centers (vertical) X-axis travel 1200-1699mm for sale (210)

Condition: good (used), Year of construction: 2008, FOR SALE Djdpfxs Af Aqke Aizjcp High-performance vertical machining center TOPPER - TONGTAI MDV-812 (Taiwan origin). Official technical specifications: • Model: MDV-812 (High-Speed / Moldmaking Series) • Year of manufacture: June 2008 (Serial number: 020851) • Numerical control: FANUC Series 18i-MB • Machining travels: X = 1,200 mm | Y = 800 mm | Z = 500 mm • Table dimensions: 1,320 × 800 mm • Maximum table load: 2,000 kg (2 tons) • Spindle connection: BT 40 taper • Power supply: 380 V / Three-phase / 50 Hz (Required power: 35 kVA) • Machine weight: 13,000 kg (13 tons) Included equipment: • Complete control panel mounted on an articulated arm • Multi-nozzle coolant system around the spindle • Coolant chiller / Cabinet air conditioner (Euro Chiller) • Remote electronic handwheel Condition: • Used machine in operational condition, sold as is.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,575 × 584 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. Dcsdpfs Ahxvaex Aizop - Table Dimensions: 1,575 × 584 mm- Maximum Table Load: 1,814 kg- Spindle Taper: CT 50 / BT 50- Tool Changer Capacity: 30+1 pockets- Rapid Traverse (X/Y/Z): 18 m/min- Coolant Tank Capacity: 360 L- Machine Weight: approx. 7,371 kg- Transport Dimensions (L × W × H): approx. 4,270 × 2,600 × 3,180 mm- Supply Voltage: 440 V - Phase: 3-Phase - Frequency: 50/60 Hz- Full Load Current: 55 A- Maximum Load Current: 50 A- Wiring Diagram Number: 96 / 0284- CE Marked: Yes

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 12.5 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1600 / 1200 / 700 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 30 [m/min] - Cutting feed rates (X/Y/Z) : 20 / 20 / 20 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1800 x 1300 [mm] - Maximum weight upon table : 4000 [kg] - Distance table / spindle nose (min./max.) : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kVA] WEIGHT & DIMENSIONS Dodpfx Ais Ahkz Rszecp - Machine floor space : 5.340 x 3.710 [mm] - Machine height : 4.060 [mm] - Machine weight : 18870 [kg] EQUIPMENT - CNC : Heidenhain TNC 640 - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - Rigid tapping - Coolant tank * with high-pressure pump : 20 [bars] * with paper filtering unit - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe : Heidenhain TT160 - Workpiece probe : Heidenhain TS460 - Electric transformer

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, table width: 600 mm, table length: 1,300 mm, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Awea BM1200 Machining Centre Dodjwvi Nmopfx Aizjcp Year 2006 Travels: 1200x600x600 mm Heidenhain TNC530 CNC SK40 Spindle 8000 rpm with gearbox Integrated 4th axis divider Spirsin Through spindle coolant

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0017, total height: 3,530 mm, total length: 4,495 mm, total width: 6,490 mm, overall weight: 23,000 kg, Equipment: chip conveyor, documentation/manual, For sale: Okuma MC-800H horizontal machining center. Reliable and powerful CNC machining center with an automatic pallet changer (APC) in good working condition. • Travel (X / Y / Z): 1250 / 1000 / 850 mm • Table / Pallet: 800 / 800 mm (2 pallets), max. load capacity 1,600 kg • Spindle: 10–4,500 rpm, BT50 / NT No. 50 taper, 22 kW motor • Tool magazine: 40 positions (automatic tool changer) Djdps Adrmrefx Aizocp • Weight / Dimensions: 23 tons, 4.5 / 6.5 m, height 3.5 m • Control: Original Okuma CNC control panel

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is an AWEA BM-1200 CNC-controlled vertical machining center, manufactured in June 2008. The machine is equipped with a Heidenhain iTNC 530 CNC control system and features an automatic tool changer with 40 tool positions. Furthermore, the machine is equipped with internal coolant / cooling through the spindle, a high-pressure coolant system, and a chip conveyor. Technical data / equipment: Manufacturer: AWEA Mechatronic Co., Ltd. Model: BM-1200 Serial number: 8015 Manufacturing date: 06/2008 Control system: Heidenhain iTNC 530 15" TFT color screen Tool holder: BT40 Spindle speed: 50 – 12,000 rpm Spindle power: 21 / 15 kW Direct drive spindle Travel range X-axis: 1,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Table size: 1,300 x 600 mm Rapid traverse X/Y: 30 m/min Rapid traverse Z: 24 m/min Tool magazine: 40 positions Tool change time: approx. 4 seconds Dual gripper Internal coolant / cooling through the spindle, Form A High-pressure coolant pump 20 bar Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Signal light 3-color Red/Yellow/Green Completely enclosed work area with work area lighting Machine documentation available Toolbox Djdpezp Iz Esfx Aizscp Alignment screws and shims CE specification Weight according to nameplate: approx. 7,500 kg Voltage: 400 V Connection power: 25 kVA Frequency: 50/60 Hz 3 phases Condition: The machine is in used condition but is complete and well-maintained. Inspection and test run possible by arrangement.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,326 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 207 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details. • Travels: X 1,626 mm; Y 813 mm; Z 762 mm; spindle nose to table 102–864 mm • Table: 711 × 1,626 mm; 5 × 16 mm T-slots; 125 mm T-slot pitch; max table load 907 kg • Spindle: max torque 122 Nm @ 2,000 rpm; ABEC Class 7 bearings; electronic orientation; water-cooled spindle head; BT40; through-spindle air blast; tool release button • Tool changer: • Standard side-mount 24+1, BT40; all-electric bi-directional; max tool Ø 76 mm (full), 127 mm (adjacent pockets empty); max tool weight 5.4 kg; tool-to-tool 2.3 s; chip-to-chip 3.2 s • Optional 40+1: tool-to-tool 2.8 s; chip-to-chip 3.6 s; max tool Ø 76 mm (full), 152 mm (adjacent pockets empty) Dcedpfszh Hbnox Aizsp • Feed rates: rapid traverse X/Y/Z 30.5 m/min; max cutting feed 21.2 m/min • Motors/Drives: axis max thrust (X/Y/Z) 15,124 N; direct-coupled servo motors; brushless servo motors; Vector Drive (Y-Δ) • Coolant & lubrication: 360-litre pull-out coolant tank; automatic lubrication system • Construction & enclosure: rigid cast iron construction; triangular wide-base castings; heavy-duty sheet steel enclosure; 14-gauge cold-rolled steel; free-flow enclosure design; door opening width 1,549 mm • Machine size & utilities: max height 3,378 mm; width 5,232 mm; depth 3,835 mm (door open); compressed air 113 l/min @ 6.9 bar; electrical 380 VAC, 3-phase, 50–60 Hz; installed power 28 kVA • Controls/Functions: Rigid tapping; Remote Hand Jog (RJH); tool load monitoring; 5 spare M-functions • Accuracy/Quality: 100% ballbar test for 3D squareness and machining accuracy • Other: high-power cartridge spindle; high-speed side-mount tool changer (24+1); easily accessible coolant tank; 1-year parts and labour warranty Additional equipment • None listed (no robots, automation, chip conveyor, bar feeder, or other external accessories specified)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 HSCI, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, MIKRON VCE 1200 PRO VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 620 HSCI CONTROL ELECTRONIC HANDWHEEL TRAVELS: X 1200, Y 600, Z 675 MM TABLE SURFACE: 1220 x 620 MM 40-TOOL RANDOM TOOL CHANGER SPINDLE: 10,000 RPM, 18 KW DUAL CHIP CONVEYOR LINEAR SCALES INTERNAL COOLANT SYSTEM: 30 BARS LASER TOOL MEASUREMENT PROBE Dcodpfx Aiey Tvw Eozop PREPARATION FOR WORKPIECE MEASUREMENT PROBE (PROBE NOT INCLUDED)

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,625 mm, travel distance Y-axis: 864 mm, travel distance Z-axis: 762 mm, table width: 1,676 mm, table length: 889 mm, table load: 2,500 kg, spindle speed (max.): 12,444 rpm, number of axes: 3, This 3-axis HURCO VMX64 was manufactured in 2007. It features a travel of 1,625 mm in the X-axis, 864 mm in the Y-axis, and 762 mm in the Z-axis. The machine includes a table size of 1,676 x 889 mm and a maximum table load of approximately 2,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX64 vertical machining centre we have for sale. Contact us for further details. - Control: HURCO Ultimax with WinMax (hard drive replaced, WinMax reinstalled) - Conversational and DIN/ISO programming (G-code), two screens, electronic handwheel - Tool taper: SK 40 - Tool changer: 40 stations - Power connection: 3 x 400 V EQUIPMENT - Chip conveyor - Coolant/filtration system KNOLL gravity paper band filter type PF 350/1050, YOM 2007 (filter capacity up to 350 l/min emulsion) - Spindle cooler (HABOR) - Oil mist extractor SARA (Type UC350/03) Dcsdpe Ahkauefx Aizop Technical Specification Taper Size SK 40

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Dsdeztpmdspfx Aizscp Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Dcodpez Dttgjfx Aizop Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, table load 2,000 kgs, Dedpfszh I Ebox Aizocp Spindle speed 12,000 rpm, input 18Kw, Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,800 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 630 mm Spindle speed max.: 15,000 rpm Tool holder: BT40 MACHINE DETAILS Control system manufacturer: Heidenhain 530 Dodpfx Aoz Apd Usizocp Operating hours: 9,800 h Machine weight: approx. 7,700 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 18 m/min, controller manufacturer: Fanuc, controller model: 0iMC, table width: 2,000 mm, table length: 800 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 6,000 rpm, spindle nose: 50, number of spindles: 1, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 125 mm, tool weight: 15 g, Equipment: chip conveyor, documentation/manual, The machine includes chip conveyor, high pressure pump, tool holder cones. Table dimensions: 2000x800 mm Longitudinal X-travel: 1600 mm Cross Y-travel: 800 mm Vertical Z-travel: 800 mm Spindle nose: 50 ISO Spindle speed: 30-6000 rpm. Motor power: 15/18 Kw Rapid X,Y,Z axis: 20,20,18 mm/min Tool Stations: 30 no. Dcedox Tri Depfx Aizep Distance spindle nose- table: 200-1000 mm Distance spindle center – column 820 mm 2 gear range speed Ø Max tool space occupied 125 mm Max tool length 350 mm Max tool weigth 15 kg Machine weigth 16.000 kg

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. Dcjdezzzwqjpfx Aizjp min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, Through spindle coolant.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1575 x 584 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 (Showroom machine) • Spindle Nose to Table (max): 32.9 in / 836 mm • Spindle Nose to Table (min): 7.9 in / 201 mm • Spindle Max Torque: 340.0 ft-lbf @ 700 rpm / 460.0 Nm @ 700 rpm • Spindle Drive System: 2-Speed Gearbox • Table Length: 62.0 in / 1575 mm • Table Width: 23.0 in / 584 mm • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • T-Slot Center Distance: 3.15 in / 80 mm • Number of Std T-Slots: 7 • Max Weight on Table (evenly distributed): 4000 lb / 1814 kg • Max Cutting Feedrate: 500 ipm / 12.7 m/min • Rapid Traverse (X, Y, Z): 710 ipm / 18.0 m/min • Max Thrust X: 3400 lbf / 15124 N • Max Thrust Y: 4100 lbf / 18238 N • Max Thrust Z: 5600 lbf / 24910 N • Tool Changer Type: SMTC (Side-Mount Tool Changer) • Tool Capacity: 30+1 • Max Tool Diameter (full): 4.0 in / 102 mm • Max Tool Diameter, Large (adjacent empty): 7.0 in / 178 mm • Max Tool Length (from gage line): 16.00 in / 406 mm • Tool-to-Tool Time (avg): 4.20 s • Chip-to-Chip Time (avg): 6.30 s • Coolant Capacity: 95 gal / 360 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC (70 A Full Load) • Input AC Voltage (3 Phase) - High: 440 VAC (35 A Full Load) • Domestic Shipping Pallet Dimensions: 168.0 in x 102.0 in x 125.0 in / 427 cm x 260 cm x 318 cm • Export Crate Dimensions: 168.0 in x 102.0 in x 130.0 in / 427 cm x 260 cm x 331 cm • Shipping Weight: 16250 lb / 7371.0 kg Additional equipment Djdpfoz Nlyqsx Aizocp • Machine vise mounted on T-slot table • Air gun attachment • Spray container and cleaning brush holder mounted on control arm console Technical Specification Taper Size BT 50

Condition: used, Year of construction: 2016, Used 2016 SPINNER U-1520 Machining Centre Supplied with Siemens SINUMERIK 840 control, 12,000 RPM spindle, 32-station tool changer, 80 bar high-pressure coolant, air through spindle, Renishaw probe, touch probe, and additional Ø650 mm rotary table. ----- SPECIFICATION: TRAVELS: - X Axis: 1,500 mm - Y Axis: 500 mm - Z Axis: 600 mm - 4 Continuous Axes + 1 Positioned Axis TABLE: - Rotary Table Diameter: 650 mm - Fixed table: 920x540mm SPINDLE: - Max Speed: 12,000 rpm - Taper: SK40 - Air Through Spindle TOOL CHANGER: - Capacity: 32 Tools COOLANT EQUIPMENT: - High Pressure Coolant: 80 bar GENERAL: - Control: Siemens SINUMERIK - Renishaw Probe - Touch Probe - Year of Construction: 2016 Control: Siemens 840D Spec: Travel X 1500 Y500 Z600 | Spindle Speed 12000RPM | SK40 Accessories: 5 axis Table, Fixed Table, 32 Tool Changer Dcsdpozx Ehnjfx Aizjp

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Brand: BRETON Italia Model: XCeeder 1200 RT Type of machine: Vertical CNC machining center, 3 axes Year of construction: 2002 CNC control: SELCA S4045PD Working Capacity X-axis travel: 1,200 mm Y-axis travel: 1,000 mm Z-axis travel: 600 mm Table dimensions: 1,500 × 1,000 mm Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 60,000 mm/min Z-axis: 40,000 mm/min Spindle Maximum spindle speed: 18,000 rpm Spindle taper: HSK-A63 Spindle line cooler Tool Magazine Automatic tool changer (ATC) Capacity: 30 tools Set of HSK-A63 tapers Assorted tooling Measuring Systems Measuring scales on the axes: X Y Z Coolant and Chip Management Coolant collection tank Dedpfx Aioz Iakmszscp Chip conveyor Washing pumps CTS pump for coolant through the spindle High-pressure CTS system External unit for CTS system Accessories: Coolant collection tank Chip conveyor Washing pumps High-pressure CTS pump through the spindle CTS external unit Scales on the X / Y / Z axes Spindle line cooler Fume extractor No. 2 magnetic tables Set of HSK-A63 tapers Assorted tooling Documentation: Machine manuals Electrical diagrams CE Declaration of Conformity Key Features: Vertical CNC machining center, 3 axes Large working travels: 1,200 × 1,000 × 600 mm High rapid traverse rates up to 60,000 mm/min High-speed spindle up to 18,000 rpm HSK-A63 spindle taper Automatic tool changer with 30 tools Measuring scales on the X, Y, and Z axes High-pressure CTS system Spindle line conditioning Chip conveyor and washing system Fume extractor No. 2 magnetic tables Complete with a set of HSK-A63 tapers and assorted tooling Complete with manuals, electrical diagrams, and CE Declaration

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes Dedpfx Aez Ah S Djizecp • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D Solution Line, table load: 2,000 kg, overall weight: 13,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis SPINNER MVC 1600 was manufactured in 2006. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1,800 × 810 mm and a maximum table load of 2,000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC 1600 vertical machining centre we have for sale. Contact us for further details. • Table: 1,800 × 810 mm • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Probing interface: Available (probe not specified) • Electrical: 3/PE ~ 400 V, 50/60 Hz; rated current 50 A • Electrical cabinet: Habor Precise Industries heat pipe heat exchanger (Model 7A2) • Drive system: Siemens SIMODRIVE 611 modular drive system • Logistics: Crane loading on truck available (~800 EUR) Technical Specification Taper Size SK 40 Dodpfx Aez Rzxreizecp

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC640, Spindle Technology: Direct drive Spindle speed: 12,000 rpm Power: 20 kW Torque: 128 Nm Tool interface: SK 40 Tool changer: 40 stations Work area Travel in X: 1,500 mm Travel in Y: 700 mm Travel in Z: 650 mm Fixed table (X/Y): 1,650 x 700 mm Table load: 1,400 kg Other Rapid traverse rate (X/Y/Z): 20/20/15 m/min Installation dimensions (L/W/H): 4,200 x 2,224 mm Machine weight: 11,000 kg Equipment Chip management: Hinged belt conveyor Dodpfx Ajx Ahg Ieizjcp Coolant management: Internal coolant supply, 20 bar Coolant cleaning: Oil separator Control cabinet temperature control: Air conditioner Workpiece measurement: Renishaw OMP 60

Condition: like new (used), Year of construction: 2008, EUMACH SPINNER MCV 1600 MACHINING CENTER SELCA S 4045 D CNC YEAR: 2008 WORK TABLE: 1,800 mm x 810 mm TRAVELS: X: 1,600 mm Y: 800 mm Z: 700 mm SPINDLE TAPER: ISO 40 / DIN 69871 Dsdpoz Td Unjfx Aizjcp SPINDLE SPEED: 10,000 RPM RANDOM TOOL CHANGER: 30 POSITIONS EQUIPPED WITH CHIP CONVEYOR FLYING TOOL CHANGER POWER: 18.5 KW WEIGHT: 15,000 KG

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: FANUC, controller model: 21i-MB, total height: 3,100 mm, total width: 2,500 mm, table load: 2,000 kg, overall weight: 13,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, product length (max.): 4,300 mm, number of axes: 3, This 3-axis SPINNER MVC-1600 was manufactured in 2006. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1,800 × 810 mm and a maximum table load of 2,000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC-1600 vertical machining centre we have for sale. Contact us for further details. • Table size: 1,800 × 810 mm • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Electrical supply: 3/PE ~ 400 V, 50/60 Hz • Rated current: 50 A • Machine dimensions: approx. 4.3 × 2.5 × 3.1 m • Operational status: dismantled, not under power Additional equipment • E.A.-tronic Super 3 central lubrication unit Dedpfxsz Rzqne Aizjcp • Habor heat pipe heat exchanger (Model HPM-35AR) • Coolant hoses/piping system installed Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. Dsdpozw N E Ijfx Aizecp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, Simulation graphics, Pocket with islands, Synchronous tapping, Helix, 3D option, NC/dialog mix, Surface selection, Tool change optimization, Dedpfx Aioy T Iwqszocp Tool and material database, X-axis bearing likely defective.