Used machining centers (vertical) X-axis travel 600-699mm for sale (240)

Condition: used, Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, Equipment: chip conveyor, MACHINING CENTER DMG MORI DMC 650 V Year: 2017 Manufacturer: DMG MORI Tjdoy Nkcnjpfx Airsd Model: DMC 650 V CNC Control: Celos with Siemens 840D Machine dimensions: 4725 x 5090 x H 2670 mm Weight: 5,900 kg AXIS TRAVELS X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Rapid traverse: 42 m/min Feed rate: up to 42,000 mm/min SPINDLE speedMASTER Spindle speeds - Continuously programmable: up to 20,000 rpm - In setup mode: 800 rpm Motor power - Max. drive power (40% duty cycle): 35 kW - Rated power (100% duty cycle): 25 kW Torque - Max. spindle torque (40% duty cycle): 130 Nm - Rated torque (100% duty cycle): 86 Nm Tool holder: SK40 Tool clamping force: 11.2 kN TABLE Table size: 960 x 570 mm T-slot spacing: 100 mm Number of T-slots: 4 / 14H12 Reference slot: 1 / 14H7 Max. table load: 800 kg Loading height (floor to table top): 800 mm 4TH AXIS – NC ROTARY TABLE MORI SEIKI DDRT 200X Center height: 140 mm Table diameter: 200 mm Center hole diameter: 65H7 mm Clamping surface diameter: 50 mm Clamping slot: 14h6 mm Clamping torque: 600 Nm Max. torque: 280 Nm Rotational speed: 150 rpm Positioning time: 5 s Repeatability: 3 s Max. workpiece diameter: 250 mm Max. speed: 200 rpm Load capacities - Max. clamping weight (one-sided): 102 kg - Max. vertical load: 100 kg - Max. vertical load with tailstock: 250 kg - Max. horizontal load: 250 kg Weight of NC rotary table: 115 kg TOOL MEASUREMENT – TT160 Probing accuracy: < 15 µm Max. deviation of measuring element: 5 mm Axial triggering force: 8 N Radial triggering force: 1 N Max. probing speed: 5 m/min Protection class: IP67 (EN 60529) Working temperature: 10–40°C CHIP CONVEYOR WITH COOLANT EXTENSION SYSTEM Coolant tank capacity: 230 l MACHINE COOLING UNIT Effective cooling capacity: 4.5 kW Cooling circuit pump: 40 l/min Refrigerant: R 134a Coolant: Water - Antifrogen® L 70/30 % Coolant filling volume: 38 l Coolant discharge temperature: +15° to +30°C Permitted ambient temperature: +10° to +45°C Unit weight (dry): 130 kg Additional Information Operating hours: approx. 2,200 20-position tool magazine Machine supplied with manuals and CE certificate of conformity All technical data provided are for reference only and subject to change without notice, and therefore are not legally binding.

Condition: repair required (used), Year of construction: 2005, machine/vehicle number: 2731660/C 0000, functionality: not functional, operating hours: 44,050 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Todpfxsrl Rwxj Airsd Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale

Condition: used, Year of construction: 2017, AWEA FCV 620 year 2017 FANUC OiMF Manual Guide 2x Tool probe Renishaw X-axis travel: 635 mm Y-axis travel: 535 mm Z-axis travel: 460 mm B-axis rotary range: -50° ~ +110° C-axis rotary range: 360˚ Table diameter: Ø 650 mm Spindle taper: BT40 Spindle speed :Direct drive 12,000 Cooling through the spindle Spindle motor (cont./min): 11/15 kW (FANUC 12,000 rpm) Tjdpfxsvy H U Ns Aired X / Y / Z axes rapid feed rate: 36 m/min. Tool magazine capacity: 32T Weight 8500kg

Year of construction: 2006, condition: excellent (used), KIRA VTC40B Machining Center TECHNICAL DATA Year of manufacture: 2006 Control system: Fanuc Series 16i-MB X-axis: 600 mm Y-axis: 400 mm Todpfsicgbksx Airjd Z-axis: 400 mm Work table, dimensions: 700 x 400 mm Work table, load capacity: 200 kg Spindle, speed: 8000 rpm Spindle, taper: BT40 Tool changer, number of tools: 20 Dimensions: Approx. 1600 x 2360 x 2700 mm Weight: 2700 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Condition: used, Year of construction: 1995, x-axis 1000 mm Tsdpfeyqwccsx Aired y-axis 500 mm z-axis 500 mm dividing head CNC Axles 4 spindle taper ISO 40 table surface area 1200x508 mm control Fadal CNC 88 HS Table load 600 kg turning speeds 40-7500 U/min Number: 9505858 Tool changer 21 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 450 mm Tjdpfx Aex Szq Ijirjd z-travel 400 mm Control FIDIA C1*/F tool magazin: 20 tool taper HSK 63 table load 0,7 t positioning accuracy 0.010 mm total power requirement / kW weight of the machine ca. 4,2 t Including automatic tool changer. Chain magazine with collets for 20 tool holders.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,132 h, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, table width: 465 mm, table length: 800 mm, table load: 200 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HERMLE C600V was manufactured in 1999. It features a fully enclosed design with dual front sliding doors and an ergonomic tool changer system. The machine is equipped with a HEIDENHAIN control unit, ensuring precision and reliability. If you are looking to get high-quality machining capabilities, consider the HERMLE C600V vertical machining centre we have for sale. Contact us for further details. Tjdpfoy T Htkox Aired - Control On: 48,840 hours- Machine On: 48,303 hours- Program Run: 19,244 hours- Drive On: 42,175 hours- Axes in Motion: 19,519 hours- Tool Magazine 1-10: 58 hours- Tool Magazine 11-20: 622 hours- Tool Magazine 21-30: 40,269 hours- Current Axis Coordinates: X = -236.820, Y = +421.759, Z = +186.835- Enclosure Style: Fully enclosed with dual front sliding doors and red ergonomic handles- Electrical Supply Connection: Overhead industrial power sockets (METEENCE units visible: 2x blue 230V outlets, 3x red 400V CEE industrial outlets)- Tool Changer System: Chain/pocket style automatic tool changer visible via top rear access panel- what is not included: clamping device, probe- the machine is equipped with the necessary mount for a Heidenhain probe- a software update was performed on the Hermle machine just this year Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm Todpfx Asw A I Uujired y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 10.000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 Tool changer: 20-fach dimension machine approx.LxWxH: 3,0 x 2,0 x 2,15 m

Condition: ready for operation (used), Year of construction: 2001, operating hours: 8,200 h, functionality: fully functional, machine/vehicle number: 28850018432, TECHNICAL DETAILS Tool diameter: max. 140 mm Speed at maximum diameter, max.: 6,500 rpm Balancing quality according to DIN ISO 1940: G 6.3 Tool Magazine Number of tools: 24 Tool diameter, standard tools: max. 80 mm Tool diameter, special tools with adjacent positions free: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg Magazine load: max. 72 kg Table Clamping surface with T-slots DIN 650-14: 800 x 500 mm Loading height, top of table: 850 mm Workpiece height: max. 240 mm Table load capacity: max. 500 kg Coolant System Tank capacity with standard chip container: 150 l Tank capacity with spindle cooling: 80 l Pump performance standard, flow rate: 30 l/min Pump performance standard, pressure: 1.2 bar Tank capacity with chip conveyor option: 750 l Pump performance, chip conveyor option, flow rate: 40 l/min Pump performance, chip conveyor option, pressure: 3.0 bar Tank capacity including chip conveyor: 750 l Pump performance, internal coolant supply, flow rate: 30 l/min Pump performance, internal coolant supply, pressure: 15 bar Chip Disposal Chip conveyor discharge height: 850 mm Chip conveyor type: scraper belt MACHINE DETAILS Rated power: 30 kVA Rated current: 42 A Delayed main fuse: 3 x 50 A Operating voltage: 400 V Frequency: 50 Hz Compressed air connection: 6 bar Required system delivery rate: 38 Nm³/h Ambient temperature: +5 to +40 °C Average temperature over 24 h: +35 °C Relative humidity: 30–95 % Dimensions & Weight Transport dimensions of the machine with table (L x W x H): 3.1 x 2.1 x 2.4 m Transport weight: approx. 4,200 kg Mounting elements: 4 x BNV 150/4 EQUIPMENT Fixed station coding Vertical tool changer Pick-up system via work spindle Coolant system Spindle cooling Chip conveyor Internal coolant supply Tedpfx Aioy Rta Eorsd Mounting elements BNV 150/4

Condition: good (used), DMG DMC 63 V, serial number 2885-0725, 11,972 operating hours. Tsdpfezqdlpsx Airsd Available at the end of 2026.

Year of construction: 2004, condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, spindle speed 12000rpm, Tedpfsm H Uyzsx Airod Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Tedpfx Aiozzlhajrod Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: new, Year of construction: 2022, functionality: fully functional, Technical Data: Dimensions (LxWxH): 1850 x 1820 x 2400 mm Table size: 700 x 350 mm Travel X-axis: 610 mm Travel Y-axis: 355 mm Travel Z-axis: 460 mm Tool changer positions: 16 Arm-type changer: optional Max. table load: 350 kg Spindle speed: 10,000 rpm Weight: 2,500 kg CNC control: SIEMENS 828D SHOPMILL The following additional equipment has been installed: - Increased spindle speed to 10,000 rpm - Chip conveyor with hinged belt design - Coolant supply through the milling spindle (internal cooling) - With 20 bar high-pressure pump = 55 l/min, separate tank - Automatic tool changer without arm, with 16 tools - 4th axis preparation Full enclosure (CE approved) Automatic tool clamping Automatic tool changer Automatic spindle air blast Swarf/chip auger conveyor Todpfxjyi Ucqe Aired Oil separator Coolant system Automatic central lubrication Work light Portable electronic handwheel for all 3 axes Telescopic covers for all 3 axes Chip flushing aid CE compliance Your advantages at a glance ✔ As-new exhibition machine ✔ High-quality additional equipment ✔ 40% price advantage ✔ Immediately available If you are interested, we will be happy to provide further information, arrange a viewing, or prepare an individual quotation for you.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 570 mm, controller manufacturer: FANUC, total height: 2,937 mm, total width: 3,090 mm, table load: 300 kg, overall weight: 4,100 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, tool weight: 6,000 g, product length (max.): 3,216 mm, number of axes: 3, This 3-axis FAMUP MCP 60 E was manufactured in 2002. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 570 mm. The machine includes a table size of 500 x 450 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 60 E vertical machining centre we have for sale. Contact us for further details. Todpfx Aiey Tlz Hered • Pallet/Table: • Table size: 500 x 450 mm • T-slots: 2 x 14 x 125 mm • Central bore: Ø50 H6 • Pallet change time: 9 s • Axis performance: • Working feedrate X/Y/Z: 10,000 mm/min • Rapid feedrate X/Y/Z: 30,000 mm/min • Working thrust S1 X/Y: 3,300 N • Working thrust S1 Z: 7,200 N • Measurement system: • Indirect measuring system • Accuracy: • Positioning accuracy X/Y/Z: ±5 µm • Repeatability X/Y/Z: ±1.5 µm • Reversal accuracy: 3 µm • Tool changer: • Selection: Bidirectional • Max. tool diameter: Ø75 mm • Max. tool length: 250 mm • Tool change time: 1.7 s • Chip-to-chip time: 2.5 s Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Tjdewtft Njpfx Airjd Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DMG MORI CMX 600V was manufactured in 2017. It features a spindle speed range of 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 600 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm, along with a table size of 900 x 560 mm. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 600V vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 30 m/min • Table: 900 x 560 mm • Tools: • Tool changer positions: 30 Tedpfx Aiozh H Etjrsd • Machine hours: 250 cutting hours • Condition: like new

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Todek It Utspfx Airod

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 670 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 470 mm, nominal power (apparent): 10 kVA, controller manufacturer: SELCA, controller model: 3045P, table width: 490 mm, table length: 900 mm, overall weight: 4,800 kg, spindle speed (max.): 9,000 rpm, input voltage: 400 V, Vertical machining center FAMUP MCX 700 Spindle speed: 9000 rpm X-axis travel: 670 mm Y-axis travel: 480 mm Z-axis travel: 470 mm Todpjycq E Usfx Aired Spindle-table distance min-max: 180 - 650 mm CNC: SELCA 3045P Table size: 900 x 490 mm T-slots: 3 T-slot pitch: 125 mm T-slot width: 18 mm Taper: DIN 69871 ISO 40 Tool magazine positions: 24 Max. tool diameter: 100 mm Max. tool width: 280 mm Motor power: 10 kW Power supply: 400V Machine dimensions: 2200 x 2900 x 2965 (H) mm Weight: 4800 kg

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Tedpfx Aeu Idgcjirsd Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: excellent (used), Working travels 620 x 470 x 400 mm Table size 700 x 450 mm Spindle taper SK40 Spindle speeds -10000 rpm Tool changer 20 Pos. Control FANUC 0iM Coolant through spindle With palett changer MARCELS MASCHINEN CH Tjdpfx Aevha Ifsired

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, table load: 700 kg, overall weight: 3,800 kg, spindle speed (max.): 22,000 rpm, number of axes: 3, This 3-axis Fidia CORTINI HS 644 was manufactured in 2001. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 400 mm. The machine has a maximum linear axis speed of 30 m/min and a robust table size of 1000 x 500 mm with a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Fidia CORTINI HS 644 vertical machining centre. Contact us for further details. • Accuracy: • Positioning accuracy (ISO 230-2): 0.010 mm • Speeds: • Max linear axis speed: 30 m/min • Max acceleration: 3 m/s² • Table: • Dimensions: 1000 x 500 mm • T-slots: • Number: 4 • Width: 14 mm • Pitch: 140 mm • Electrical supply: • Standard: EN 60204-1 • Voltage: 400 V • Frequency: 50/60 Hz • Pneumatic supply: • Standard: PNEUROP 6611 • Pressure: 0.7 MPa ±10% (7 bar ±10%) • Footprint: 2150 x 2450 mm • Environmental conditions: • Ambient temperature: 10–40 °C Todpfx Aoy S S A Isirod • Relative humidity: 10–80% (non-condensing)

Condition: used, Year of construction: 2003, x-travel 640 mm Tjdpfx Aiswp S Rmerod y-travel 600 mm z-travel 500 mm Control SIEMENS 810D powerline table dimensions 850 x 630 mm table load capacity 600 KG tool magacine with 30 Plätzen spindle turning speed range 12.000 U/min total power requirement 42 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,50 x 3,30 x 3,60 m Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements chip conveyor coolant / belt filter system Interlit SPB 3/600

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2008. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The machine offers a table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information. • Operating hours: 17,641 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min • Tool changer: 20 positions Todpfeyca I Sox Aired • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2001, x-travel 560 mm y-travel 460 mm z-travel 450 mm Todpfxoyi Hv Ne Airjd Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: used, Year of construction: 2008, travel distance X-axis: 705 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, table width: 460 mm, table length: 1,260 mm, table load: 400 kg, overall weight: 5,200 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 26,000 rpm, spindle nose: HSK-E50, number of slots in tool magazine: 28, tool diameter: 63 mm, Vertical Machining Center Manufacturer: FEHLMANN Model: PICOMAX 90-HSC Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Technical details: X-axis travel: 705 mm Y-axis travel: 425 mm Z-axis travel: 610 mm Feed rate (X, Y, Z axes): 1 – 20,000 mm/min Tsdpfszq Hkhsx Airsd Feed force (X, Y, Z axes): 12,000 N Table clamping surface: 1,260 x 460 mm T-slots (quantity x width x spacing): 9 x 12-H8 x 50 mm Max. table load: 400 kg Distance floor – coordinate table: 1,026 mm Distance coordinate table – spindle nose: 92 – 702 mm Horizontal throat depth: 480 mm Spindle speed: 50 – 26,000 rpm Drive power – main spindle (100/40% duty cycle): 11.5 / 15.0 kW Max. torque S1/S6: 25.2 / 32.9 Nm Tool holder: HSK-E50 Number of tool positions: 28 Max. tool diameter: 63 mm Max. tool dia. with adjacent station free: 100 mm Tool length: 260 mm Tool weight: 3 kg Power rating: 22 kVA Weight: approx. 5,200 kg Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Erowa automation - FEHLMANN ATS 160 CNC rotary table - incl. machine vices (see image 6) Accessories, pictured tools, and workholding devices are included in the scope of delivery only if stated in the additional information. Subject to technical changes, errors, and prior sale.