Used miter saws / chop saws for sale (132)

Condition: used, Cutting height at 90°: 135 mm Cutting length: mm Mitre range horizontal: - Mitre range vertical: -60° to +60° Iodpfx Ajx I Ai Djbcsap Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Workpiece clamp: yes Spray device: yes Extraction port: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Isdpfxjw Hl Aqs Abcoap Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: new, Year of construction: 2026, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts Ijdpfocnz Rvex Abcoap manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.

Condition: good (used), Year of construction: 2021, functionality: fully functional, saw blade diameter: 500 mm, The saw is still in operation and can be tested at any time by arrangement. Data available on the nameplate. Iaodpfx Absyaangocsp

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Iaodsv A Htkspfx Abcep Weight 1500 kg Total power requirement 10,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Iodev A Htdjpfx Abcoap Weight 1000 kg Total power requirement 8,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 900 kg Iedpfxev A Hr Tj Abcoap Total power requirement 5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4500x1200x1200 mm Weight 1500 kg Total power requirement 8 kw Iaedpfovz Hz Eox Abcop

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x1070x1200 mm Isdsvz Hzxepfx Abcsap Weight 1150 kg Total power requirement 10 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Iedpfxevz Eq Se Abcsap Weight 0 kg Total power requirement 0 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9400x1200x1600 mm Weight 1400 kg Total power requirement 12,5 kw Isdpfjvz Ekrsx Abceap

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage ----- Technical data ----- Isdpfx Absu R S I Hjcsap Cutting height: 60 mm, Voltage: 230 V

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Iajdpfx Abju R Sycjcsp Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine - Iaodou R Sypjpfx Abcop

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Iaedpfxovtrkie Abcep Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting fixed lengths according to cut lists and cutting out defective sections Cutting cycle: Defect trimming via chalk marking Cutting to fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths with single piece loading WS.1 Through-feed crosscut saw 4 pcs. lower feed rollers 1 pc. loading table, 2 meters, right side, with dual marking table 1 pc. outfeed table, 1 meter, with rear stop Roller height adjustable manually 12 pcs. luminescent chalk sticks Cutting capacity: Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming options: - Defect trimming via marking - Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension Isdox Da Tvopfx Abceap 100 storage slots for cut lists Detection system for the last two pieces to be cut and the following piece Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional) Technical specifications: Feed system adjustable by motor, brushless and with toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting cycles per minute up to No. 100 Minimum workpiece length 550 mm Minimum workpiece width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with dual marking table ZA110 Outfeed table ZA058 TCT saw blade Ø 500 mm ZA296 Motorized adjustment of roller height

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Saw blade: 700mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed Iedpfx Aborfudrocjap - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: excellent (used), OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material clamping Pneumatic saw pass Saw control with two buttons Main motor with a power of 7.5kw 2x roller tables length 160cm each CE certificate Technical documentation Iajdork Nxgopfx Abcjp

Condition: excellent (used), Year of construction: 2002, Disc diameter 50 mm 7.5 kW motor 3 sorters Iaedsuxnpcjpfx Abcep The length of the automatic feeder is 4 m The length of the receiving feeder is 6 m Cutting cross-section 300x100

Condition: excellent (used), Year of construction: 2021, Two saws 2.2 kW motors Max. Cutting width 240 cm Height 10 cm Iedpfoha Nchsx Abcoap Very good condition.

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° Saw blade Ø 520 mm Weight 310 kg Scope of delivery: ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Ijdpfx Absh Nu Iujcjap Operating tool and hand crank

Condition: new, Year of construction: 2026, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Iaodpfeb Nrg Usx Abcop Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Condition: used, Year of construction: 2004, functionality: fully functional, AUTOMATIC CROSS CUTTING MACHINE STROMAB MOD. TR 600 - 2 meters infeed rollers - 2 meters outfeed rollers Iaedpfjx Rrp Ssx Abcsp - N. 3 stops - CE rules - Year 2004

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! Iasdpfx Abefcdnlocsp The Legend_600 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Condition: new, Year of construction: 2025, Zero mistakes, zero waste, and higher productivity! We thought SalvaStop_100 as a fundamental component to give your work an edge. Through numerical control, this electronic stop manages the push, stop and positioning of the profiles to be cut, regardless of the material. So you can reduce human errors, avoid waste and decrease labor costs. SalvaStop_100 is integrated with exclusive software that is easy to use thanks to an immediate, easily understandable and complete graphic interface. Isdjkzhb Uepfx Abceap You can have the SalvaStop stop alone or combined with one of our Legend crosscutting saws to improve performance, work in complete safety and minimize human error.