Used Die cutter for sale (113)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump Hnjdpfx Aewypp Ieabju - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Year of construction: 2021, condition: good (used), Die-cutting and embossing machine Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Min. sheet size: 300 x 350 mm Max. sheet size: 760 x 1,060 mm Max. machine speed: 8,000 sheets/h Max. die-cutting pressure: 2.6 MN / 260 t Materials and pile height (incl. pallet) Paper min.: 90 g/m² Cardboard / solid board max.: 2,000 g/m² Corrugated board max.: 4.0 mm Feeder pile height: Without non-stop: max. 1,500 mm In non-stop operation: max. 1,200 mm Hnodpevxu Smsfx Aabju Max. feeder pile weight: 1,500 kg Without blanking station Without MasterSet 91025ä

Condition: excellent (used), Ref: 11018 . Heidelberg SBG Cylinder Professionally converted for precision die cutting and creasing applications Features: For die-cutting / creasing in packaging and commercial finishing Used for carton production, creasing, embossing, or die-cutting Cylinder mechanism ensures consistent pressure distribution Ideal for materials such as cardboard, paperboard, and synthetic substrates Highly efficient, accurate and durable Long-term mechanical reliability Specification: Max sheet size: 560 × 770 mm Min sheet size: 115 × 160 mm Hnsdsxnzq Rspfx Aabju Speed: 3,500 – 4,600 sheets/hour Machine size (L×W×H): 3,500 × 2,000 × 1,850 mm Net weight: 5,300–6,000 kg

Condition: good (used), Busch B+P Ram punch, label die cutter A professional machine made in Germany. Very good condition. The Bush company is a leader in the production of pallet turners and pushers. 100% efficient, ready for production. This is the currently produced model. Technical data: Max. format 230 x 230 mm Number of cycles 13/min Max. input 170mm Efficiency 780,000 sheets/h Weight 860kg The machine has a hydraulic quick-acting unit. Clamps for mounting dies, axial adjustment of dies. Hnjdpfx Ajxddh Rsabsu Feed table adjustable in every plane. Two operating modes: semi-automatic, manual. Tail on the delivery.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 0581 007 04, Speed: up to 9000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Hnedexixhispfx Aabeu Cutting force: up to 2.5 MN (250 t) Equipment / Additional information: Die-cutting plates (over 500 pieces) Tools

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE Hnedpfx Aasxl Talobou - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Year of construction: 2022, condition: ready for operation (used), Technical specifications: Sheet Max. sheet size: 1060 x 740 mm Min. sheet size: 400 x 360 mm Stock range: Paper from 90 gsm Cardboard 157~2000gsm Corrugated board (E,B FLUTE) Min. gripper edge: 4mm Die-cutting Max. die-cutting size: 1040 x 730 mm Max. pressure: 300 tons Hjdpfx Aajw Hpxisbsnu Max die-cutting speed: 7500 sph Max speed with stripping 6500 sph Rules height: 23.8 mm Main motor capacity: 11 kW Total power capacity: 23 kW Dimensions (L x W x H): 6000 x 4200 x 2400 mm Net weight: 16,000 kg 2 pcs die-cutting plates 2 pcs Die-cutting frames 1 pc tape inserter

Condition: ready for operation (used), functionality: fully functional, Graphic Whizard numbering, perforating and creasing machine with many accessories. Immediately available Hedpfjvcxwnsx Aabenu

Condition: like new (used), RENZ DTP 340 M - Electric Punching Machine Working width: 340 mm, Punching tool: DTP 340 M, 3:1, 4x4 mm Hodpoxmawysfx Aabenu The RENZ DTP 340 M is a very robust punching machine, free from complicated components prone to failure, and is reliably used in many print shops and copy shops—even under heavy-duty conditions. Our recommendation is further supported by the experience that top-feed punching slots facilitate paper insertion, effectively preventing mis-punches. Additionally, in combination with the various binding modules that can be attached to the punching unit, the RENZ DTP 340 ensures an ergonomic setup and efficient workflow. - Electric heavy-duty punching machine - Prepared for modular expansion as a punching and binding unit - Basic unit supplied without punching tool and binding module - Sturdy and solid construction, especially suitable for medium and large job runs and continuous operation Punching width: up to 340 mm Punching capacity: up to 3.5 mm (~35 sheets of 80 gsm paper) per punching operation (depending on the tool) Quick-release punching pins for the fastest format changes Quick tool change with clamping device within 1-2 minutes All tools with adjustable margin depth (except for spiral binding) Vertical paper alignment for precise punching results Foot switch for punch activation Large waste drawer Power supply: 230 V / 50 Hz / 250 watts Dimensions: W 490 x D 360 x H 250 mm Weight: 31 kg + punching tool Connection: 230V / 50Hz

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication Hnodpfxjxcy Has Aabju - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Year of construction: 2024, condition: good (used), Technical data: • 75 x 53 cm, 6 mm Accessories: • PC workstation • DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console • Hot foil printer/enhancement system SLEEKING System HAK 100/Brother Price: Please provide your binding offer Available from: Immediately Delivery terms: Ex works – EXW Wiehl Hsdjwtqivepfx Aabenu Payment terms: Payment before collection Accessories sold without warranty. Applies: “Object purchased as seen.” The buyer is responsible for verifying the completeness of the item on site.

Year of construction: 1993, condition: excellent (used), age 1993 Hedpfjfp Ddlsx Aabsnu semi automatic hot stamping machine stamping area max. 125 x 280 mm electr. drive 1 foil feeding system 1 heating plate automatic feeding unwinding system for round material / cans underframe Delivery time: immediately from stock

Year of construction: 2024, condition: like new (used), functionality: fully functional, The packing aid for a folding carton gluing machine is in like-new, ready-to-use condition. We no longer need it because our setup requires a left-hand discharge. Hodpfx Aajxgpd Aebenu

Year of construction: 2022, condition: as good as new (ex-display), Large format cutting plotter DG1513 Cutting format 150 x 130 cm synchronized vacuum belt system Unwinder for large format roll goods Hedonfvwvepfx Aabsnu Tangential knife Oscillating knife Creasing tool Incl. vacuum generator Control console control, incl. software

Condition: new, HEIDELBERG steel die-cutting plates for KS 38/52 cm, KSB 40/57 cm, KSBA 46/58.5 cm, OHZ 54/72 cm, SBG 56/77 cm. HEIDELBERG T 26/38 cm platen, Printing plate GTO52, GTO46, KOR, KORD, KORS, MO. BRAND NEW AT HALF PRICE!!!! Hodsxfqwuspfx Aabsnu

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, Erba Titan 6PN cutting machine Year of manufacture: 2000 Technical specifications: • Maximum sheet size: 1210 x 1700 mm • Pneumatic clutch and brake • Hardened cutting plate • Die mounting: bolted to the frame • Three machine operating modes • Central lubrication pump • Laser safety system Machine in good technical condition, fully functional and ready for operation. Hedexb A Nhspfx Aabenu Ideal for companies with medium to high production volumes. EXWORKS PRICE POLAND: EUR 60,000

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual Hedpowq Dwzofx Aabsnu – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Year of construction: 2020, condition: excellent (used), This machine is available for the German market only. Hnodpfxog U Amzj Aabeu

Condition: refurbished (used), Flatbed die cutter Erba model TITAN 1 PN, format 64/88 cm, Picard plate, millimetric pressure adjustment, centralized lubrication, self-centering frame, 3 operating modes (single, continuous, timed), full enclosure, counter-die plate, machine completely overhauled. Hnsdpfxsxd T Dbj Aabsu

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Hnodpfowfq T Ssx Aabou Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market. Hnsdpswxtb Sjfx Aabeu

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake Hedsu Ul Tzopfx Aabjnu – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication Hnsdpfx Aaswxtcpjbju – safety guards – operating tools – sheet metal for pressure

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication Hnedswxtb Ejpfx Aabju – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Atom SE 20C hydraulic arm press The device is in perfect condition, ready to work. It is ideal for die cutting difficult materials, especially used in the leather and printing industries. Possibility of using typical leather and bookbinding dies. Cuts paper, cardboard, leather, plastic, etc. Hnsdpfx Aaowundtobsu Pressure 20t Power supply 380V Table dimensions: 900mm x 430mm Hammer dimensions: 370mm Max stroke 90mm Engine power 0.9kW Weight 630kg Two-handed control.