Used eccentric presses single column over 100t for sale (110)

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm Dcodpfxou Nfino Aizjp drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, functionality: fully functional, ERFURT PRESS 250t Dcjdpfsv Hqacsx Aizop

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: Dcsdpoy Tvdxsfx Aizsp - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW Dodpfsu N A Uuex Aizscp weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. Dcjdpfx Aeu Nfizsizep *

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm Dodezrpqgjpfx Aizscp table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: used, Year of construction: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in increments: 30 ... 160 mm Ram adjustment: 180 mm Throat depth: 515 mm Strokes per minute (idle): 45 / min Option: Infinitely variable stroke rate: 10 … 60 / min Dcjdjw Rbxzepfx Aizjp Die installation height at maximum stroke, bottom dead center, and ram fully raised: 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin bore in ram: 65 mm Main motor power: 45 kW Approximate machine height: 4,325 mm Machine weight: 33,000 kg Control system – Press safety control with redundant design and self-diagnosis, featuring plain text status and error display Infinitely variable stroke rate in the range of 10 ... 60 strokes/minute via ABB frequency inverter Control variant: TFT color touchscreen including electronic cam controller with die management and die protection, with color touchscreen visualization, SIEMENS PLC S7-300, die data management, counting systems, data transmission via Profibus Fully automatic stroke adjustment / ram adjustment Rigidly welded tie rods, clear distance between tie rods: 1,345 mm Swiveling main control console Non-contact safety guard – BWS brand LUMIFLEX, mounted at the front of the machine table or die area, installed on the tie rods

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Dcodpfx Aiouqdwxozop Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: good (used), Year of construction: 1977, Offer 25021 Technical data approx.: - Pressure force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Hole in the table approx. 320 mm - Ram surface approx. 800 x 475 mm - Tenon hole in the ram mm - Ram adjustability 110 mm Dcjdpfsvmx N Ejx Aizjp - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

Year of construction: 1986, condition: used, pressure 100 t Dcsdpfxep Syczs Aizop throat 340 mm stroke 8-140 mm no. of strokes 50 Hub/min ram - range of adjustment 110 mm table surface area 1000x700 mm ram surface 650x450 mm hole in the table Ø 180 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 10,5 t dimensions of the machine ca. BxTxH 2300x1600x3500 mm

Year of construction: 1987, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 50 / 75 Hub/min ram - range of adjustment 85 mm table surface area 1150x670 mm ram surface 800x380 mm hole in the table 330x200 mm table height 800 mm tool hole in ram Ø 50 mm Dcsdpfxsp Apxhe Aizep weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x2700 mm

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Stroke rate 70 1/min. Further data and pictures on request Djdpfx Aisrm Ntpozjcp the press is currently not functional and must be mechanically and electrically overhauled

Condition: used, Manufacturer: Müller Stanz- und Umformtechnik GmbH & Co. KG Type: PMLE250x1700 R-HK Machine No.: A05036-02 Dodpfx Ajzrz Ecsizecp Year of manufacture: 2006 Machine type: Eccentric press Press force: 2500 kN Press force: 250 t Stroke rate: 20–120 min⁻¹ Stroke: 25–125 mm Ram adjustment: 100 mm Voltage: 400 V Motor power: 55 kW Connected power: 100 kW Weight: 47,000 kg Draw cushion: No Condition: Used Machine is leaking hydraulic oil Several leaks are present in the hydraulic system Tension pins for the ram adjustment have been deactivated due to the hydraulic leaks Sold without conveyor system Videos available upon request Location: Freiburg

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm Dedpfeu Nfi Uex Aizecp height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1985, Technical details: Dcsdpfx Aiou Nfh Dozjp pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm This press is currently for sale without controls. Optional on customer request completion possible. i.D. *

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Dedpfsvbk Rwex Aizscp Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Dcsdpfxou Rwa Ij Aizop Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm Dcsdpfeu Nfkljx Aizjp surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Stop position: TDC Voltage: V 380 Frequency: 50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Safety guards with safety keys; Dcodpfewaiw Sox Aizjp • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Dcedpfx Aerm Nqmeizep Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm Dsdsxh Swhspfx Aizocp ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: used, Year of construction: 1990, ECCENTRIC PRESS GIZELIS 200t PRESSURE 200t TABLE DIMENSIONS 1000x660 mm STROKE 17-230 mm POWER 11 kW WITH HYDRAULIC CLAMPING SYSTEM Dcedpfx Aiex N Sqyezjp

Condition: good (used), Year of construction: 1970, Offer 25020 Technical data: - Pressure force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Hole in the table approx. 320 x 220 mm - Ram surface 940 x 400 mm - Ram adjustability 100 mm - Stroke adjustment 20 - 130 mm Dsdpfxovnmbls Aizecp - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Condition: used, Year of construction: 1992, pressing force: 160 t, stroke length: 180 mm, overall weight: 13,000 kg, Eccentric Press Brand: AITOR Model: ARMM/EF Type: Pneumatic clutch Year: 1992 Dodeyl Tuwjpfx Aizjcp Force: 160 t Strokes per minute: 50 Stroke (Max / Min): 180 / 5 mm Maximum connecting rod extension: 120 mm Weight: 13,000 kg *The press is delivered as is, without any kind of warranty.

Condition: as good as new (ex-display), Year of construction: 2026, Machine to be exhibited at EUROBLECH 2026: Trade fair – special price! Press force: 1600 kN Stroke: 15 – 110 mm Stroke rate: 30 – 65 /min Ram adjustment: 95 mm Table: 1,100 x 700 mm Ram: 900 x 500 mm Installation height: 460 mm Weight: 12,000 kg Connection: 15 kW Dcodpfsz Hkh Hsx Aizep Includes: - Fully automatic stroke adjustment, hydraulic overload protection, motorized ram adjustment - Frequency inverter, central lubrication, light curtain - Control system: SIEMENS S7/1500