Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 45320 014, overall weight: 70 kg, grinding wheel width: 30 mm, grinding wheel diameter: 160 mm, No minimum price – guaranteed sale to the highest bidder! Hfodpfx Agsyr H Uqswsd Placing a bid requires timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Grinding wheel diameter: 160 mm Grinding wheel width: 30 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connected load: 0.9 kW Rated current: 1.8 A Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 1,200 mm Machine weight: 70 kg External reference: Lot 13

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 264237J, total width: 350 mm, total length: 450 mm, total height: 350 mm, overall weight: 70 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time between 04/05/26 and 07/05/26. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 450 x 350 x 350 mm Hfedeyr Hukspfx Agwed Weight: 70 kg External reference: 31

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 400 mm workpiece height: 500 mm Table dimensions: 2230 x 670 mm table surface area: 1340 x 400 mm magnetic plate size: 1000 x 410 mm table load: 450 kg throat of the spindle nose: max 330 mm grinding spindle speed: 1440 U/min total power requirement: 18,2 kW weight of the machine ca.: 3,5 nur Maschine t dimension machine xH: 1,9 x 3,3 x 2,25 m dimensions electric cabinet LxWxH: 1,0 x 0,4 x 1,4 m Precision surface grinding machine Possible surface grinding operations: -cross grinding; plunge grinding; face grinding and grinding with a straight grinding track Further specifications: -hydraulic table speed, infinitely variable 1...30 or 2...30 m/min. -Largest table stroke 1150 mm -Manual cross feed 0.01 mm Hfsdpfxjx Afpas Agwsd -Manual vertical infeed of the grinding wheel 0.002mm and minimum infeed 0.001mm -Automatic infeed 0.001...0.1mm -Largest selectable total infeed amount 5.0mm -Coolant system (tank with pump) -hydr. aggregate -control cabinet *

Condition: used, Technical details: Hedpfxow Rktbj Agwjfd grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: reconditioned (used), KELLENBERGER 600 U 175 is a cylindrical grinder of high precision, offering accuracy and reliability. Capacities: centre height 175 mm, between centres 600 mm; wheel Ø350×50 mm, bore 127 mm; wheelhead 270°. Specs: wheel speeds 1500–3600 t/min (4 steps); work spindle 20–400 t/min (stepless); table tilt 10°, up to 6 m/min; supply 3×380 V 50 Hz; wheel motor 4 CV; weight ≈2200 kg; dims 3000×1750×1600 mm. Accessories: digital readout (2 axes), tailstock fine adjust, internal grinding attachment, wheel guard, safety device, sliding door. Suited to tight tolerances in automotive, watchmaking, machine tools, aerospace and medical sectors. Hfsdpfxeyr Hiho Agwsd

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Hfodjd Rmcmjpfx Agwod Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent Hfodjhv A A Depfx Agwjd - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: excellent (used), Year of construction: 2000, Description to follow! Hodpfeyrtwxox Agwjfd

Condition: excellent (used), Year of construction: 1994, Description to follow! Hodpjyrtwrjfx Agwofd

Condition: excellent (used), Year of construction: 1985, Description to follow! Hfjdpfx Ageyrtvzowed

Condition: good (used), Year of construction: 2004, Used tube grinder by Gritt Hodpfxeytb Ibo Agwsfd Model: GX 75 2H Grinding width: 75 mm Including tools Year of manufacture: 2004

Condition: used, Year of construction: 2000, Empty weight: 1.000 kg Price: On request Volume: 420 liter Diameter: 1520mm Channel: 3300x365mm Complete set - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 23628 - Control: Conventional - Motor power: 3.0kW - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hodpfx Agjytg Nkewefd Lukas van Rossum

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 3 Hfodpfsx D H Erjx Agwjd This 3-axis EASTAR ESG-1640ASD II surface grinding machine was manufactured in 2008. It features a substantial work plane of 400 x 1000 mm, ideal for various grinding tasks. If you are looking to get high-quality grinding capabilities, consider the EASTAR ESG-1640ASD II machine we have for sale. Contact us for more information. Application Types Grinding

Condition: used, Year of construction: 2006, total height: 1,600 mm, total length: 1,300 mm, total width: 1,500 mm, Empty weight: 900 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 108088 - Motor power: 1.0kW Hsdpfx Asytbc Sogwefd - Transport dimensions: 1300mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Specifications Manufacturer: Deckel Model: SOE Condition: Used Stock number: 00662 Hfedpfeytfbxox Agwed

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, grinding length: 400 mm, grinding width: 150 mm, JUNG JF 415 Jung JF 415 Surface Grinding Machine with Flanges and Coolant Belt Filter * Table length: 400 mm * Table width: 150 mm * Maximum grinding length: 400 mm * Maximum grinding width: 150 mm * Maximum workpiece weight: 75 kg * Distance spindle to table: 400 mm * Table speed: 1–24 m/min Hodpfxjytfbfo Agwsfd * Grinding wheel diameter: 25 mm * Spindle speed: 900 – 4500 rpm * Heidenhain digital readout * Year of manufacture: 1990, machine no.: 1566

Condition: ready for operation (used), Year of construction: 2007, operating hours: 37,000 h, functionality: fully functional, Timn Scope of Supply • Item 1: Timesavers machine model 71-serie-1600-WW-RT (for No. 4 finish). • Item 2: Timesavers machine model 71-serie-1600-BB-RT (for SB finish). • Item 3: Filtration equipment • Item 4: Laminator UNIVERSAL LAMINATOR UL 2931 • Item 5: Extensive set of spare parts (contact rollers, billyrollers) • Additional equipment: tables and pallet stacks • Year of manufacture: 2007 • Operating hours: 37,000 • Machine in working condition. 1.2.1 ITEM 1: First Machine: 1 TIMESAVERS, 71 series-1600-WW-RT General Description: Grinding machine equipped with two wide abrasive belt top contact rollers for grinding and finishing stainless steel coils to a NO. 4 finish. Operation: • Load meter indicates percentage of head motor load, allowing full utilization of available horsepower. • Mitsubishi E 1070 Control unit including: • Electronically digital feed speed read-out in mm/min. • Electronically digital thickness set-up read-out in mm. • EMC Filter (for fluctuations in the electrical supply). 1st Head for No. 4 finish: • Contact roller: Ø280 mm, with special vulcanized oil and heat-resistant rubber, 55 Shore hardness, with special profile groove. • Heavy-duty grinding head. • Fine height adjustment of the head, precision to 0.01 mm for pressure or abrasive belt thickness adjustment. • Displacement can be read out on the dial indicator. • Outboard support: quick-release M20 bolt for fast abrasive belt changes and rigid head support. • Abrasive belt tension: air-operated and activated by thumb switch. Air tensioning automatically compensates for belt stretch. • Machine cannot be started unless belt is tensioned. • Abrasive belt tracking: electronic system automatically keeps the high-speed abrasive belt on the head. • Belt trimmer: lever to correct belt mis-tracking. • Tracking limit switch: safety stops the grinding head in case of tracking failure. • Frequency-controlled main motor, 45 kW, 8-22 m/sec for achieving different finishes. 2nd Head for No. 4 finish: Hjdpfoxvbxdox Agwefd (Specifications identical to the 1st head: 280 mm contact roller, frequency-controlled 45 kW motor, etc.) Technical Specifications (Item 1): • Max. working width: 1600 mm • Abrasive belt dimensions: 1600 x 2620 mm • Working height opening: 0.5-50 mm • Feed speed (frequency controlled): 0-30 m/min • Main motors (1st & 2nd head): 45 kW each • Total installed power: Approx. 100 kW • Machine weight: 9,000 kg _____ ITEM 2: Second Machine: TIMESAVERS, 71 series-1600-BB-RT General Description: Brushing machine equipped with two brush units for SB Scotch-Brite brush finish. Brush Head Specifications (1st & 2nd Head): • Scotch-Brite brush: Ø400 mm • Motorized height adjustment • Adjustable oscillation: 200 to 700 oscillations per minute • Frequency-controlled main motor, 22 kW per head Technical Specifications (Item 2): • Max. working width: 1600 mm • Brush diameter: 400 mm • Working height opening: 0.5-80 mm • Brush oscillation motor: 3 kW • Machine weight: 12,000 kg

Condition: used, Year of construction: 2013, The original build year of this machine was 1998. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. The spindle bearings were replaced with high-precision ball bearings 14 days ago. The spindle is now running with 0-1 µm accuracy and is very quiet. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 16 (warming-up program) Measuring probe Electrostatic mist extractor Oil collection tray Automatic fire extinguishing system Pneumatic workpiece clamping Machine light X – axis longitudinal movement: 350 mm Y-axis vertical movement: 200 mm X-axis cross movement: 470 mm C-axis rotary table swing range: + / - 200° Centre height (with / without over-table): 130 / 160 mm Workpiece holder: ISO 50 Max. Workpiece diameter: 100 mm Workpiece length: 270 mm Grinding spindle speed stepless variable: 0 – 9500 U / min Workpiece length face grinding: 150 mm Grinding wheel diameter: max. 150 mm Hedpfx Ageyrrhvewofd Drive power grinding spindle: 9 kW Connected load: 400 V / 50 Hz / 25 kW Weight: approx. 3600 kg Dimensions W x D x H: 2869 x 2716 x 1933 mm colour: grey RAL 7035 / 7043.

Condition: used, Year of construction: 2013, The original build year of this machine was 1999. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Step Tools Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 4 (step tools) Software package 6 (woodworking tools) Software package 8 (taps) Software package 16 (warming-up program) Software package 32 (contours) Measuring probe Electrostatic mist extractor Oil collection tray Automatic fire extinguishing system Pneumatic workpiece clamping Machine light X – axis longitudinal movement: 350 mm Y-axis vertical movement: 200 mm X-axis cross movement: 470 mm C-axis rotary table swing range: + / - 200° Centre height (with / without over-table): 130 / 160 mm Workpiece holder: ISO 50 Max. Workpiece diameter: 100 mm Workpiece length: 270 mm Grinding spindle speed stepless variable: 0 – 9500 U / min Workpiece length face grinding: 150 mm Grinding wheel diameter: max. 150 mm Drive power grinding spindle: 9 kW Hjdjyrra Sspfx Agwjfd Connected load: 400 V / 50 Hz / 25 kW Weight: approx. 3600 kg Dimensions W x D x H: 2869 x 2716 x 1933 mm colour: grey RAL 7035 / 7043.

Year of construction: 2023, operating hours: 4,976 h, condition: ready for operation (used), General Data Measurements width 3250 mm Measurements depth 2100 mm Measurements height 2150 mm Control Unit Brand FANUC Model 31i-B Main Drive Number of axis 4 Hfedpfxox D Nfns Agwed Movement X-Axis Movement 370 mm Z-Axis Movement 800 mm Workpiece Workpiece weight 150 kg Additional Equipment Equipped with: Measuring probe, Kraft & Bauer fire extinguisher installation, LTA oil mist separator, DGS paper filter, motorex/Ritter & bader coolers, grinding wheels, documentation This 4-axis STUDER S33 cylindrical grinding machine was manufactured in 2023. It features a distance between centers of 650 mm, center height of 175 mm, and can handle a maximum workpiece weight of 150 kg. Equipped with a Fanuc 31i-B control system, it also includes a measuring probe, fire extinguishing system, oil mist separator, and coolers. Consider the opportunity to buy this STUDER S33 cylindrical grinding machine. Contact us for more information about this machine. Application Types Grinding

Condition: excellent (used), Control SIEMENS 840D Hodpfeyrhl Rox Agwsfd

Condition: used, Year of construction: 2010, total height: 1,500 mm, total length: 1,200 mm, total width: 1,300 mm, Price: On request - Year: 2010 - Documentation available: No - CE certificate present: No - Serial number: 114858 - Transport dimensions: 1200mm x 1300mm x 1500mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hjdpoyr Rn Isfx Agwsfd Lukas van Rossum

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Empty weight: 900 kg Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Hjdpeyr Rnzefx Agwjfd

Condition: ready for operation (used), total height: 2,855 mm, total length: 6,202 mm, total width: 3,445 mm, empty load weight: 11,800 kg, Movement of table: 1610 mm (manual) / 1420 mm (hydraulic) Vertical movement: 850 mm Transverse movement: 750 mm Max distance between table and grinding wheel: 750 mm Fanuc touchscreen control Nikken 4th axis Twin rotary diamond disc unit - this unit is mountedvertically with a slide-way adjustment to cater for the differing grind heights. The unit is designed to mount twin opposing discs to support dressing in both directions and provide support for the 6 thou diamond tip radius. Dimensions of the table: 1200 x 600 mm Max dia grindingstone: 457 x 100 x 203,2 mm Spindlespeeds: 1400 and up to 3000 rpm Motorpower: 22 kW Hfedpjytyq Ijfx Agwjd

Condition: ready for operation (used), Alpa RTL 1000 Worklength with magnetic table: 1000 mm Grindingwidth: 635 mm Longitudinal travel X-axis (autom.): 1150 mm Cross-travel Y-axis (autom.): 560 mm Travel Z-axis (autom.): 620 mm Dimensions magnetic table: 1000 x 500 mm Max dia grindingstone: Ø 400 × 127 × 75 mm Hfsdpfx Asytyq Uegwod