Maynards Europe GmbH

Condition: good (used), Year of construction: 2015, Lot consists of: (1) CNC Crankshaft Control Balancing Machine Position consists of: (1) CNC crankshaft control balancing machine Gbelhccswg A Sioqksl Technical Details/Technical Details: English: max crankshaft length 800mm, max dia 300/200mm, max weight 50kg, bearing dia 30 - 80mm, balancing speed 200-650 rpm, 230V 50Hz, LxWxH,:1.3x1x1.5m Parts Gantry System and/or Cranes are not included in the scope. German: Maximum crankshaft length 800mm, maximum diameter 300/200mm, maximum weight 50kg, bearing diameter 30-80mm, balancing speed 200-650 rpm, 230V 50Hz, LxWxH: 1.3x1x1.5m Parts gantry system and/or cranes are not included in delivery.

Condition: good (used), nominal flow rate: 27 m³/h, Reverse Osmosis system, Manufactured by Protecno, model ROM 12, CE, serial #170109HEN, feed rate 27.50m3/hr, raw water flow to system 27.50 m3/hr, feed pressure 14.19 bar, flow factor 0.85, permeate flow 21m3/hr, recovery 76.36%, feed temperature 5 degrees C, feed TDS 408.99 mg/l, osmotic pressure 0.18 bar, concentrate 0.72 bar, average 0.45 bar, 5m3/hr concentrate discharge, all parts skid mounted, System consists of (16) reverse osmosis cells, manufactured by Protec Ariswi, type Pro 8-300, max operating pressure 20.6 bar (300psig) at -7/49 degrees C (20/120 degrees F), CE, (2) 30m3/hr at 137.9m head 304 stainless steel inline centrifugal pumps, manufactured by Grundfos, type CRN32-9 A-F-G-E-HQQE, model B96122367P11734, driven by 18.5kW, 3/50-60/380-415/660-690/380-480/660-690 volts, 2940-2950/3520-3560 rpm motor Gjlhowg Avuoccqksbl (2) 320mm diameter 316L stainless steel cartridge filters, manufactured by protecno (AVT), model SH123, type 037.123.1, (12) 30” high cartridges, 89 liters, design pressure 13 bar at 0/150 degrees C, (1) 200mm diameter 304 stainless steel cartridge filters, (1) 1000 liter fiberglass resin vertical tank, manufactured by Naldi Ecologia, pressure atmospheric at ambient temperature (=

Condition: good (used), Year of construction: 2019, 10 bars. 75kW. Safety valve has been removed (see picture N°6 inside). We are trying to recover that safety valves, buyer must assume we haven't found it back. Gslhjwfc T Rsccqksbl design Pressure in Bars: 10 Weight in kg: 1420

Condition: good (used), Year of construction: 2019, Functionality: unexamined, machine/vehicle number: 10021711, overall weight: 1,400 kg, load capacity: 210 kg, controller manufacturer: KUKA, controller model: KRC 4, 1. Robot Arm • Manufacturer: KUKA Deutschland GmbH • Type: KR 210 R3100 Ultra (KR210R3100 ULTRA C4 FLR) • Item number: 10021711 • Serial number: 1239324 • Year of manufacture: 04/2019 • Weight: 1154 kg • Payload: 210 kg • Reach: 3096 mm • Country of origin: Germany 2. Robot Controller • Type: VKR C4 • Item number: 1106074 • Serial number: 3007941 • Year of manufacture: 10/2019 • Weight: 168 kg • Supply voltage: 3x400V • Mains frequency: 50/60 Hz • Full load current: 22 A • Mains fuse: 25 A • Country of origin: Hungary Gelsv Tyw Dehccqkebl 3. Extraction system • Manufacturer: ESTA Apparatebau GmbH & Co. KG • Type: Small Dust Collector OM-8 • Serial Number: 19002523 • Year of Manufacture: 2019 • Voltage: 400 V • Power: 0.55 kW • Current Consumption: 1.4 A • Noise Level: 10A [dBA] • Volume Flow (Max.): 600 m³/h • Weight: 60 kg • Protection Class: IP44 • Max. Negative Pressure: 1600 Pa • Country of Origin: Germany 4. Equipment & Special Features • Teach panel with connection cable (visible in the control cabinet) • External electrical/control cabinet installation with Ethernet and safety connections (typical for KUKA) • Additional attachment mounted on the robot flange, for special applications (e.g. B. Grinding or deburring applications) • Base for stationary floor mounting • Control and power cables pre-assembled and integrated • System is stored on pallets and ready for transport

Condition: good (used), Year of construction: 2005, Functionality: unexamined, machine/vehicle number: 29406, Lot consists of: (1)CNC Gear Shaping Machine Position consists of: (1) CNC gear shaping machine Technical Details/Technical Details: Gbelhcov R Tmtocqkel English: max dia 130mm, max face width 25mm, min/max module 0.5-4, strokes 500 - 2,500 1/min, spindle dia 85mm, CNC Siemens Sinumerik 840D, 400V 50Hz 49kW, LxWxH 6.4x4.5x4.4m, weight 12to Parts Gantry System and/or Cranes are not included in the scope. German: max. diameter 130mm, max. face width 25mm, min./max. Module 0.5-4, strokes 500-2,500 rpm, spindle diameter 85 mm, CNC Siemens Sinumerik 840D, 400 V 50 Hz 49 kW, LxWxH 6.4 x 4.5 x 4.4 m, weight 12 tons Parts gantry system and/or cranes are not included in the scope of delivery.

Condition: good (used), Year of construction: 2016, Hosokawa Mikron dual-chamber unloading glove box/isolator, fully refurbished in 2016 by Concept Containment Designs, 316 stainless steel, ATEX compliant. Includes CO.RA dosing valve, exhaust fan, and Mettler-Toledo scale. Alloy: 316 stainless steel Gjlhccqsv Rxaxekobl

Condition: good (used), comes with a blue metal cabinet containing some spare parts Gbelhccqjv Rw R Njkol

Condition: good (used), Year of construction: 2021, with autosampler 7693A/G4513A (model year 2020). GC is model G3540 Gbelhcjv Rw Nlecqkjl

Condition: good (used), last calibration Aug 2024 Gbolhccev Rw Eyoqkol

Condition: good (used), Year of construction: 2020, Vacuum system (cost 74,000 GBP) – UNUSED ON PALLET, PD HO250S6 1K1 EASD A30 BFO VO 00A00001 (ATEX) Gbolhcsv Rwz Iecqkjl

Condition: good (used), 12,500 liters per minute at 8 bar per pump with a power of 237 kW. Engine brand FIAT, model 9L15 Gjlhccsv Rwydsqkobl

Year of construction: 2015, Condition: good (used), 4500-liter stainless steel tank with 3 bar/FV. Weight 1220 kg, radiography 10% Gbelsv Rww Njhccqkjl

Condition: good (used), Year of construction: 2000, Volume in l: 50; Design pressure in bar: 6.6/FV; Design temperature in °C: -30/200 °C; Alloy: Hastelloy lined; Weight in kg: 325 Gelhccqsv Rv Tcekebl

Condition: good (used), Year of construction: 2000, Design pressure in bar: 6.8 bar at 200 °C (100 PSI at 400 °F); Alloy: Tantalum Gbolhccqsv Rv Sfsksl

Condition: good (used), Year of construction: 1998, Design pressure in bar: 10 bar (150 PSI), alloy: tantalum Gbjlhev Rv Rhsccqkel

Condition: good (used), See photos for plate design Pressure in Bar: 6; Design temperature in °C: 200 Gjlhov Rv I Tjccqkobl

Condition: good (used), Year of construction: 1998, Stress relief: YES. Motor 16 kW, rpm 0–200; Volume in l: 6820; Design pressure in bar: 6.83 .. 6.83; Design temperature in °C: -29/200 °C; Alloy: GLCS; Weight in kg: 7100 Gbelhcjv Rv Iaocqkjl

Condition: good (used), Year of construction: 2001, Cat. 3; Volume in l: 77; Design pressure in bar: FV-6.6 bar at 120°C; Alloy: Hastelloy lined; Weight in kg: 315 Gbjlhccsv Rvz Heqkjl

Condition: good (used), Year of construction: 1999, with PLENTY MIXER 10-100 rpm. Radiography 100%, 5,580 kg dry weight; Volume in l: 10,700; Design pressure in bar: Jacket: FV-6.8 bar. Coil: 13.61 bar; Design temperature in °C: -60/+300 °C; Alloy: Hastelloy; Weight in kg: 5,580 Gelhsv Rvzaeccqkebl

Condition: good (used), Year of construction: 1998, Pipe surface area: 8.4 m². Equipment drawing available upon request; Design pressure in bar: 10 bar (150 PSI) at 150 °C (300 °F); Design temperature in °C: 150 °C; Alloy: Tantalum; Weight in kg: 458 Gjlhccqev Rvw Iekobl

Condition: good (used), Year of construction: 2016, 2500 l Buss paddle dryer, 316SS, fully overhauled in 2016, including AGP segmented ball discharge valve, seal pressure unit, ATEX compliant, BOILER: 3150 liters, -1/2 bar, 165 °C. HEAT BAG: 105 liters, 6 bar, 165 °C. AGITATOR: 800 liters, 6 bar, 165 °C; Alloy: 316 SS Gelhccev Rvvqeqkebl

Condition: good (used), Alloy: 316 SS Gbslhccqov Rpbmoksl

Condition: good (used), Year of construction: 2016, Rosenmund pressure filter, 7 m², 316SS, extensive overhaul 2016, including segmented AGP outlet valve, screen segments, variable speed drive, hydraulic power pack, dry gas mechanical seal, mixer: RPM: 16–1460. P=15 kW. Year of construction 2016. Alloy: 316SS. Gbjlhccsv Rn S Dsqkol

Condition: good (used), Year of construction: 2016, Frewitt hammer mill, 316SS with some components made of Hastelloy C22, huge range of spare parts and consumables. Additional equipment includes cleaning systems and a vacuum pump. Full technical information available upon request. Total project cost £1.7 million, mill cost £500,000. Particle size up to 30 μm and capacity up to 2000 kg/h (general configuration, exact data for this mill not yet available); Alloy: 316SS/C22 Gelhccqsv Rn N Nsksbl

Year of construction: 2018, Condition: good (used), Position consists of: (1) Ventilation system, (1) ventilation unit for outdoor use, (1) duct silencer, (1) throttle device, (1) chiller German: Air volume: 33,000 m3/h Can be throttled to 5,000 m3/h / 6,000 m3/h Golhovy Er Heccqkobl Connection power (gas): 135 kW Cooling capacity of chiller: 132 kW Dimensions: 5,600x2,900x2,900mm