Burbage Maskin AB

Condition: ready for operation (used), Year of construction: 2018, Brand: Rema Model: FX 550 Machine no: 026 Year of manufacture: 2018 Siemens touch screen Controls saw blade up/down/tilt, cutting fence Digital gauge on length stop Technical data Sliding table length 3900 mm Saw length 3900 mm cutting width 1400 mm Lelhcdwewdtziszork Cutting height with 550 blade 90 degrees 120-20 0mm, 45 degrees 85-140 mm Motor 6 kW Scoring unit motor 0,75 kW Power 400 volt, 50 Hz, 3 phase Stock no: 2002350BXA

Condition: ready for operation (used), Year of construction: 1998, Brand: Superfici Type: TU166-20+1UVM55 Machine no: 4632 Year: 1998 Max. width 1300 mm Lolewaydpshcdwzerk Number of lamps 1+3 Control cabinet. Stock no: 2002484BXM

Condition: ready for operation (used), Year of construction: 1998, Brand: Superfici Type: TU166-20+1UVM55 Machine no: 4632 Year: 1998 Max. width 1300 mm Number of lamps 1+3 Control cabinet. Stock no: 2002484BXM Lolhewax Tpscdwzork

Condition: ready for operation (used), Year of construction: 1987, Märke: Bacci Lolhcev T Tp Tjdwzerk Model: MOA Machine no: 1844 Year of manufacture: 1987 Stock no: 2002478

Year of construction: 2012, Condition: ready for operation (used), Machine no: 483 Lrolhcdjv Rpxfowzjk Year of manufacture: 2012 Technical data Belt length: 3900 mm Belt width: 1350 mm Total width: 1900 mm Max weight on belt: 400 kg Motor: 0.37 kW, 50 Hz, 380 V, 3-phase Stock number: 2002452BXA

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Model year: 2011 Stock no.: 2002451BXM Lrelhsv I Ur Sscdwzek Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Workpiece length min. 400mm Workpiece height 3-80mm Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Brand: Cefla Model: Easy 2000D Serial no: 05079/6 Year: 2005 Renovated with: -New control PLC -New feed carpet -New bearings under carpet -New bearing at recovery Note:Available earliest mid May-2025 Lrelhev Inqzjcdwzjk Cefla model D automatic sprayer for applying paint to boards and other flat workpieces. The machine with dry filter has 2 holders for spray guns. "Back spray" also enables the application of paint to edges. The endless belt allows leftover paint to be recycled. The most important parts of the machine: Air ventilation equipment Air purification system Paint supply and distribution system Gun drive system Endless conveyor belt Electronic control system Easy sprayer provides: High quality of painted objects, paint that does not hit the workpiece is recycled High production speed High utilization rate of paint Dimensions: 4840x3708x2900mm (lxwxh) NOTE: With reservation for incorrect technical data presented TECHNICAL DATA Control system ED-EASY2000 Max working width including edges 1300mm Max working thickness 70mm Air flow supply fan 10000m3/h, 3 kw Air flow exhaust fan 12000m3/h, motor 7.5kw Paint supply and distribution system Feeder belt speed 1.6-10.6 m/min Variator 1.1 kw Air pressure mat holder 3bar Compressed air consumption 50Nl/min Air pressure feed pump 6bar Air pressure gun spraying 1-4bar Air pressure gun nozzle 5-6 bar Spray gun holder Motor for operating guns 2 kw Spray gun speed 120m/min Sound level 77.5 db in operation Current: 400 volts, 50 Hz, 3 phases, total 18.1 kw, 40 A Maximum motor power 4 kw, 15.6 A

Condition: used, Year of construction: 2021, 1 pc hydraulic Turntable 1 pc nail table on wheels, rotatable with integrated compressed air Ljlhcev Id S Uodwzsrk Brand: Drato Model year: 2021 TECHNICAL DATA 1 pc Hydraulically controlled turntable, Drato 1 pc Nail table/assembly table (rotatable) Drato with integrated compressed air. Tables dimensions: Length: 9600 mm Width: 2400 mm Extendable to 3200 mm

Condition: ready for operation (used), Year of construction: 1999, Roller conveyor & robot Robot: Make: Kawasaki Lrslhcdsv H Aqaswzok Model: UD 100 Serial No: 0289R0S3S Year of manufacture: 1999 Capacity: 100 kg Including protective fence Stock number: 2002448BXM

Condition: ready for operation (used), Year of construction: 2021, Brand: Flex-Trim Type: Stacksander Year of manufacture: 2021 Lelhcdwev Hyf Iezjrk Lifting system pmh Stock number: 2002445BXM

Condition: ready for operation (used), Brand: Bila Lifting system tawi Ljlhov Hyfhjcdwzjrk Machine no: 250315-1 Stock number: 2002444BXM

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Lrolhov Hw Hcscdwzek Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller Lrjlhev Hn N Uecdwzek - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: ready for operation (used), Year of construction: 1998, Brand: Futura Type:Krono SS 180/4 Machine no:98028 Year:1998 4-sided planing in one pass, for e.g. glue joint production or moldings with different profiles etc. Complete with 6 cutters of which 2 are spiralcutters Long infeed table Pneumatic pressure on feed rollers Lolhcdsv Hf S Hjwzerk Technical data Infeed table 2000mm long Max size workpiece 180x120mm Min size workpiece 25x8mm Spindle diameter 40mm Tool diameter first spindle 125mm Diameter of pre-mill 145mm Max tool diameter 2nd, 3rd and 4th cutter 180mm Min tool diameter 110mm Spindle speed 6000v/min Feed rate variable 4-20m/min Feed wheel 130mm in diam with pneumatic pressure Extraction nozzles 138mm in diam Power 400 volt, 50 Hz, 3 phase, 46 Amp Stock no: 2002395

Condition: ready for operation (used), Year of construction: 2006, Description of the product Brand: Costa Model: TRITT1350 Serial no: A60314LL1 Year of manufacture: 2006 Stock number: 2002440BXA Technical data Working width: 1350 mm Lrslhcdwsv Hfdvjzsk Sanding belt size:1380x2620mm Power:400volt, 50 Hz, 3 phase, 51kw, 101AMP 1. sanding unit 1 sanding belt sectioned 2. Sanding unit 2 sectioned sanding shoe 3. sanding unit 3 sectioned sanding shoe 4. cleaning brush 5. blast cleaning 6. Vacuum Motor: 51 kW Size for transport: 320x240x265 cm (lxwxh)

Condition: used, Year of construction: 2006, Brand: Costa Lelhcjv Hbagodwzjrk Model: TT1350 Serial no: A60314LL2 Year of manufacture: 2006 Stock number: 2002436BXA Technical data Working width 1350 mm Sanding belt size 1380x2620mm Power:400volt, 50 Hz, 3 phase, 32kw, 65 Amp 1. sanding unit 1 sectioned sanding shoe 2. sanding unit 2 sectioned sanding shoe 3. cleaning brush 4. airblast cleaning 5. Vacuum

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Lrelhcdwsvydwzezjk Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Length: 3500 mm Width: 200 mm Lifting table Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Condition: ready for operation (used), In-feeder TP Type: TP Ljlsvxuy Rshcdwzsrk Compact planer/moulder feeder for various length up to full length, frequency-controlled gear motors. Buffer chains, one of which is adjustable for current subject length. Techn info: Feed speed 5-50m/min Buffer chains 2100mm Shortest pcs length 400mm 400 volts, 50 Hz, 3 phase Stock no: 2002173BXA Note: some images in the ad may be on another equivalent machine

Condition: ready for operation (used), Year of construction: 1995, UV oven IST 1+2 lamps, 1 stearing cabinet Model: IST Type: HL 140 Year: 1995 Lslhjvxivyocdwzork Techn. info: Through feed width: 1600 mm IST-lamps type: CK 1400 U1 Power: 400 V, 50 Hz Stearing paower: 230 V, 50 Hz Lamp efficiency: 100 W/cm (14 kW/lamp) Energi consumption: 145 A Size of oven 1-lamp (lxw): 2580x2540 mm Size of oven 2-lamps (lxw): 3020x2540 mm Control electric cabinet (lxwxh): 1600x600x2000 mm Stock no: 2000351

Condition: ready for operation (used), Year of construction: 1995, Brand: IST Type: 4 lamp Lolhcsvxitledwzsrk Year: 1995 techn info: Through feed width 1600 mm Lamps efficiency 100 W/cm (14 kW/ lamp) Power: 400 V, 50 Hz Stearing power: 230 V, 50 Hz Energy consumption: 145 A UV oven dimensions: 5000x2540 mm (lxw) Electric cabinet dimension: 1600x600x2000 mm (lxwxh) Stock no: 2000361BXA

Condition: repair required (used), Year of construction: 1997, Brand: Casati Model: Z1000 Machine no: 9709021 Year of manufacture: 1997 Lreljvw Tnkjhcdwzek

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Saw length: 3 200 mm Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Lroljvwku Uehcdwzek Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM

Condition: ready for operation (used), Year of construction: 2007, Edgebander Brandt: Brandt Type: KDF660 Serie nr: 0-261-08-0484 Year: 2007 Return system Brandt: Ligmatech Type: ZHR 01/R/065 Serie no: 0-305-10-1299 Year: 2007 Edgebander equipped with:Pre-routers, cutting units, fine trimmers, radious trimmers, rounding units, scrapers, buffing, release agent, return system Technical info edgebander: Edging thickness: 0.4 - 12 mm Scissors: max. 3 x 45 mm resp. 0,8 x 65 mm Workpiece thickness: 8 - 60 mm Feed speed: approx. 16 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: Power 400 volt, 50 Hz, 3 phase 18.4kw, 35AMP Compressed air connection: 6 bar Connection power: approx. 15 kW Machine length: 6 360 mm Lrslhovwkrgecdwzek Technical info return system: Machine length: 6 355 mm Working side: Right Working height: 810 to 950 mm +/- 30 mm Stock no: 2002414BXM

Condition: ready for operation (used), Year of construction: 1995, Brand: Levigaltecnica Model: Perfect SRRN 1100 Machine no: 1663 Year of manufacture: 1995 Tech info: Working width: 1100 mm Sanding belt width: 1130 mm Sanding belt length: 2150 mm Min/Max working thickness: 3 / 160 mm Minimum length of workpieces: 280 mm Work table height: 900 mm Power of 1st and 2nd motors: 12.5 - 12.5 HP Feed motor power with gear motor: 1.6 / 2.2 HP Feed speed: 18 / 16 m/sec Motor power for thickness adjustment: 0.5 kW Hardness of rubber rollers: 85 SH Diameter of rollers: 200 mm Air flow capacity: 6000 m³/h Minimum pressure of compressed air: 5 bar Motor: 24 kW, 50 Hz, 380V, 3-phase Weight: 2500 kg Stock number: 2002382BXM Lrsljvhah Sehcdwzok

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Lelhcdju Racxowzjrk Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA