Used hydraulic presses single column for sale (67)

Year of construction: 1991, condition: used, pressure 100 t throat 380 mm stroke 300 mm Lodpfx Adjlp U Ayowsrg arm length 380 mm table surface area 1700x700 mm ram surface 1400x700 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 10 t dimensions of the machine ca. 2400x3600x3400 m

Year of construction: 1991, condition: used, pressure 40 t throat 320 mm stroke 250 mm arm length 320 mm table surface area 1400x600 mm ram surface 1200x600 mm dayligth 650 mm total power requirement 22 kW Lrjdpfelp U Avox Adwjg weight of the machine ca. 8 t dimensions of the machine ca. 3200x3300x3300 m

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. Ljdpfx Adsxna Uzeworg hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Technical details: pressure: 40 t distance between columns: - mm Ledpfxow Smuks Adworg stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, functionality: fully functional, pressing force: 250 t, Maximum pressing force 250 tons. Working pressure 20 MPa. Upper table 700 x 450 mm. Lower table 900 x 630 mm. Clearance height 800 mm. Cylinder stroke 500 mm. Lowering speed 110 mm/sec. Lifting speed 200 mm/sec. Required power 20.5 kW. Weight 8,000 kg. Lrsdpfxex N Iras Adwog

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Lredpjfhcc Uofx Adwjg Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: new, Year of construction: 2019, pressure:100 t passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2000 x 2750 mm Table size:750 x 600 mit T-Nuten mm Table height above ground level:850 mm Ledpsfu Nqxjfx Adworg Oil Tank Capacity:190 l main cylinder:230 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :23 Lt./min. Approach Speed:110 mm/sec Pressure Speed:9 mm/sec Return Speed:200 mm/sec Ram plate:750 x 600 mit T-Nuten mm pre-run valve:NG.63 Stk Painting:Lichtgrau & Dunkelgrau Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:750 + 150 mm Control Set-up operation:manuell ohne Lichtsensor Automatic control:mit Lichtsensor Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: used, Year of construction: 2015, machine/vehicle number: A2536805, pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm Lrsdjfxyhfspfx Adweg table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Condition: new, Year of construction: 2021, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Ledpfxjgrki Sj Adwsrg Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Year of construction: 1990, condition: used, pressure 100 t throat 260 mm stroke 300 mm table-size 500 x 500 mm ram head dimension 650 x 500 mm dayligth 700 mm oil volume 600 l capacity of ejector in table 40 t return capacity 13 t total power requirement 22 kW weight of the machine ca. 7 t dimensions of the machine ca. 2.07 x 2.48 x 3.3 m - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- Lrjdpfob U Hvasx Adwjg blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 8,5 kW Ledpod R Szuofx Adwjrg weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: new, Year of construction: 2024, operating hours: 818 h, functionality: fully functional, pressing force: 350 t, stroke length: 890 mm, warranty duration: 12 months, 📋 Technical Specifications (English) Lsdpfx Ajxf Dzgjdwsrg Capacity: 350 Tons at 250 bar (including auxiliary cylinders) Main Cylinder: Ø395 mm, Rod Ø300 mm, Stroke: 890 mm Auxiliary Cylinders: Ø80 x 100 mm, Rod Ø50 mm, Stroke: 890 mm Cushion Cylinders: Ø180 x 230 mm, Rod Ø115 mm (4 units) Motor: 18.5 kW – 25 HP, 1500 rpm, IE3, 380 V Pump: 71 cc, 105 L/min, variable displacement, pressure-compensated piston type (Taiwan, imported) Valve Block: NG-16, 24 DC, P-Q proportional control Equipped with precise proportional control for all movements: pump protection valve, decompression relief valve, ram–cushion line, pressure transmitter, auxiliary throat protection valve, cushion-seal protection valve, free fall valve. Electrical Panel: Siemens Screen: GMT 7” (domestic, 1-year warranty) Pre-Fill Valve: NG 160 (Taiwan model) Speeds: Down fast speed: 175 mm/s (P-Q proportional adjustable) Up fast speed: 285 mm/s (P-Q proportional adjustable) Pressing speed: 5 – 14.5 mm/s (P-Q proportional adjustable) Dimensions: Table 1200 x 1000 mm, Daylight 1000 mm Linear Scale: Yes Light Curtain: Yes Machine Weight: 15,000 kg ± Oil Tank: 1300 x 900 x 600 mm, 700 L capacity

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Lrjdev Rwu Ujpfx Adwjg Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressure:40 t Lrsdpfx Asfhcc Hjdweg passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Lrjdpfxsdxrqwo Adwjg Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Condition: new, Year of construction: 2025, table height: 850 mm, throat depth: 375 mm, pressing force: 200 t, table width: 750 mm, table length: 1,000 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 200 Lsdsvzkvgepfx Adwerg PRESSURE (TONS) 200 STROKE (MM) 800 THROAT DEPTH (MM) 375 TABLE – RAM DISTANCE (MM) 900 TABLE DIMENSION (MM) 750X1000 PRESS DEPTH (MM) 1500 PRESS WIDTH (MM) 850 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2900 MAIN CYLINDER DIAMETER (MM) 320 ENGINE POWER (KW) 22 WEIGHT (KG) 11500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: new, Year of construction: 2025, table height: 850 mm, throat depth: 350 mm, pressing force: 150 t, table width: 700 mm, table length: 1,000 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes Ljdpfx Adjvzkvajwerg - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 150 PRESSURE (TONE) 150 STROKE (MM) 700 THROAT DEPTH (MM) 350 TABLE – RAM DISTANCE (MM) 800 TABLE DIMENSION (MM) 700X1000 PRESS DEPTH (MM) 1400 PRESS WIDTH (MM) 800 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2800 MAIN CYLINDER DIAMETER (MM) 280 ENGINE POWER (KW) 18.5 WEIGHT (KG) 10500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: refurbished (used), Year of construction: 1995, functionality: not functional, machine/vehicle number: H95-2601, total height: 2,400 mm, table height: 830 mm, installation height: 750 mm, total width: 1,100 mm, total length: 1,200 mm, throat depth: 260 mm, pressing force: 16 t, table width: 700 mm, table length: 460 mm, operating speed: 180 mm/s, overall weight: 2,700 kg, reverse speed: 450 mm/s, type of input current: three-phase, stroke length: 370 mm, oil tank capacity: 500 l, input voltage: 400 V, pressing speed: 40 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been checked for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure that the press will be in almost as-new condition. Lrjdpfx Aexyxyyodweg

Condition: new, Year of construction: 2022, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm Lrodshmi T Uopfx Adwsg

Condition: ready for operation (used), C-frame Press, Hydraulic Press, PYE Press 3t, Used Machine Ljdpfxow Hc H Ho Adwjrg Manufacturer: VEB Wema Type: PYTE 3.15 Overall dimensions: 500 x 730 x 1170 mm Pressing force: 3.15 tons Stroke: 280 mm Table size: 280 x 280 mm Electrical data: 380 V; 1.5 kW; 4 A

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Lrjdpfxsu Hkfpj Adwog Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Hydraulic Pressure: 100 bar Stroke Length: 180 mm

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Stroke length: 600 mm Daylight: 800 mm Ljdpfew R Aamjx Adworg Cushion: 20t

Condition: good (used), Year of construction: 2014, volume flow: 1,570 m³/h, Vacuum pump Becker Variair RV 2.1944/10 Relative pressure: +410 mbar Volume flow: 1570 m3/h Lsdpfx Aev Anv Tsdwjrg Weight: 60 kg + 21 kg inverter

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm Lrjdpoxuhzcofx Adwsg - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 068-071/270, throat depth: 150 mm, table width: 280 mm, table length: 280 mm, distance table to ram: 355 mm, stroke length: 280 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Rated force: 3.15 Mp Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Lrodpfxowvh R Aj Adwjg Downward speed: 300 mm/s Ram stroke: 280 mm Throat: 150 mm Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz