Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching Dob Ejwb Supe Rqq Uekl >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: good (used), Year of construction: 2003, Functionality: fully functional, GENERAL Project No.: 905722 Quantity: 1 pc. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year build: 2003 Condition: Used Machine DESCRIPTION TURNING Max. turning diameter 356 mm Max. turning length 655 mm Max. Swing diameter over bed 520 mm Dsb E Rov Tbf Aeqq Ujkl Max. Swing diameter over cross slide 250 mm Max. Swing diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at 10-40/100% duty ratio 18 kW Spindle bore main spindle 75 mm Spindle flange size main spindle A2-8 Axis at main spindle unit C Hollow clamping cylinder at main spindle Tailstock NC-controlled 1 pc. Upper turret No. of stations/driven 12/12 Speed tool drive 6000 1/min Axis in turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse in X/Y/Z 18/-/24 m/min FURTHER EQUIPMENT Tool life time monitoring Fully enclosed work area Light in working area Preparation for central oil-/emulsion mist extraction unit Scraper-type chip conveyor Machine operates/operated with oil Flush gun Coolant unit High pressure pump 40 bar Automatic CO2-fire extinguishing system Finish-part pick-up unit Bar loader/magazine FMB turbo 8-80 Warning lamp ACCESSORIES 1 pc. Collet chuck mm 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools GENERAL TECHNICAL DATA Mains fuse 142 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 3495 x 2050 x 2222 mm Machine weight approx. 5800 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: reconditioned (used), Year of construction: 1995, Functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,500 mm, total height: 1,500 mm, overall weight: 10,500 kg, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, Used universal lathe PORĘBA TRP-93/3M, year of manufacture 1995, has been inspected and externally overhauled by us. The delivery includes a steady rest with a diameter of 450 mm and a 4-jaw lathe chuck with a diameter of 800 mm. Availability: the machine is available immediately, under power, technical inspection at any time Technical data: - Distance between centers/turning length: 3000 mm - Turning diameter over bed: 930 mm - Turning diameter over support: 650 mm - Turning diameter in the bridge recess: 1150 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6000 kg - Maximum workpiece weight between centers + 1 steady rest: 7600 kg - Maximum workpiece weight between centers + 2 steady rests: 9200 kg - Number of spindle speeds: 21 - Speed ​​range (rpm): 5 - 800 - Motor power [kW]: 17/27 (gear 1/gear 2) - Overall dimensions: - Total length: 5500 mm - Width: 1500 mm - Height: 1500 mm - Total weight: 10,500 kg Additional equipment included in the scope of delivery: Dkob E Rqqewdv Rme Usl - 1 x steady rest with a diameter of 450 mm - 1 x 4-jaw chuck with a diameter of 800 mm.

Condition: new, Year of construction: 2025, Attention - Promotion!! Completely free first warranty inspection - special offer only for Customers who took part in the show before purchase - at the Otinus machine showroom in Bydgoszcz. CNC lathe HLC-4055 on Fanuc 0i TF control Machining range: - Max. turning diameter over bed: Φ 560 mm - Max. turning diameter over support: Φ 320 mm - Max. turning diameter: Φ 400 mm - Max. turning length: 548 mm - Distance from spindle center to ground: 980 mm - Travel range in X axis: 210 mm - Travel range in Z axis: 610 mm Tool head: - Turret type: Hydraulic V12 - Outer dimension: 25x25 mm - Inner diameter: Φ 40 mm - Indexing time: Φ 0.55 s Spindle: - Drive type: Belt transmission - Maximum spindle speed: 4500 o/min - Power consumption - 15 min: 11/15 kW - Torque - 15 min: 140/250 Nm - Spindle nose: JISA2-6 - Spindle through hole: Φ 76 mm - Maximum workpiece diameter: Φ 50 mm - Spindle front bearing diameter: Φ 100 mm - Spindle diameter: 208 mm Feed speed: Deb Eowdt Szo Rqq Ujkl - Rapid traverse X: 24 m/min - Rapid traverse Z: 30 m/min - Servo motor power X/Z: 1.8/1.8 kW Tailstock: - Tailstock quill diameter: Φ 100 mm - Centering type: MT NO.4 - Quill stroke: 120 mm - Travel range: 410 mm Other parameters: - Control: FANUC - Power supply: 25 kVA - Coolant tank volume: 200 l - Machine weight: 4.5 t - Dimensions [length × width × height]: 4200×2050×1850 mm

Condition: ready for operation (used), Year of construction: 1990, CNC Turning Machine Fabr.MONFORTS Type: RNC 4 Year 1990 Control FANUC 10TF-FAPT. Dsb Eevgcwas Rqq Uskl Turning diameter max:250 mm Turning length : 1000 mm Spindle speed: 70-4000 rpm Spindle passage: 65 mm Hollow clamping device Chuck diameter 250 mm Röhm Tool turret 12 Pos.VDI 40 Tailstock MK 4 Complete machine documentation, chip conveyor. Complete weight approx. 7 500 kg.

Condition: as good as new (ex-display), Year of construction: 2025, S600M - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by performance, speed, precision, and long service life. • Heavy-duty design • Renishaw measuring arm for manual tool measurement • Recirculating ball screw with improved accuracy, rigidity, and heat resistance. • Siemens servo motors on all axes • 45° inclined bed design for particularly large machining diameters • Improved, unobstructed chip drainage into the chip tray • Hydraulic three-jaw lathe chuck Ø 200 mm • Sauter VDI 40 tool changer with 12 tool positions and driven tool • Hardened and precision-ground ball screws for high rapid traverse speeds in all axes • Dimensionally stable linear guides ensure a long service life through maximum static and dynamic rigidity • Manual tool measurement device • Tailstock with hydraulic quill • Portable, electronic handwheel with enabling button and emergency stop push button • Belt-type chip conveyor ensures efficient chip removal • Coolant system with cleaning gun Tools included: • 2 axial holders for driven tools • Radial holders for driven tools • 3 square cross-mounted holders • Square transverse mount • Square longitudinal mount • ER 32 collet set (6, 8, 10, 12, 16, 20 mm) • EMC (Electromagnetic Compatibility) Features Dkjb E Rjwbc R Ieqq Usl Linear guide • Maximum static and dynamic rigidity • High positioning accuracy Tool turret • Hydraulic VDI 40 turret • All 12 stations are driven by an integrated motor designed for speeds up to 4,000 rpm Communicative • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card PPU 270 control system • 10.4" color display • 4:3 format System software • PPU 271 SW 24 Complete package • Safety Integrated • Residual material detection and processing • ShopMill Work Step Programming • Manage Network Drives • 3D Simulation • Simultaneous Recording • Dimensions and Weights Length approx. 4570 mm Width/Depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Working Areas Lathe Chuck Diameter 320 mm Turning Length 475 mm Swing Diameter over Machine Bed 570 mm Swing Diameter over Cross Slide 400 mm C-Axis (Factory Option) Angular Accuracy 51" Repeat Accuracy 20" Motor Torque X-Axis 11 Nm Z-Axis 11 Nm Speed Range Speed Range 30 – 4000 rpm Rapid Traverse Speed X-Axis 24 m/min Z-Axis 30 m/min Electrical Data Connection Voltage 400 V Electrical Connection Total Connected Load 40 kVA Accuracy Repeatability ± 0.002 mm Positioning accuracy ± 0.004 mm Hydraulic system Chuck diameter 51 mm Inclined bed 45° Tailstock MK 5 chuck mount Quill stroke 100 mm Quill diameter 100 mm Quill stroke, hydraulic control Spindle Spindle mount DIN ISO 702-1 No. 6 Main spindle: Hydraulic lathe chuck 200 mm Spindle taper A2-6 Main spindle: Spindle bore 65 mm Travel path X-axis 235 mm Z-axis 530 mm Vertical spindle Drive motor power, continuous operation S1: 11 kW Drive motor power, S6-30% operation: 22 kW Drive motor torque 70 Nm Drive motor power, S6-30% operation: 140 Nm Drive motor power 4.82 kW Maximum permissible speed at the tool coupling: 6000 rpm Maximum tool torque: 20 Nm

Year of construction: 2021, Condition: ready for operation (used), Control Unit Brand FANUC Main Drive Number of axis 3 This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021, offering advanced horizontal turning capabilities. Ideal for complex and precise metalworking tasks, this machine ensures efficient production with its robust design and modern technology. If you are looking to get high-quality turning capabilities, consider the CMZ TTL-66-66-TTY-T2Y machine we have for sale. Contact us for more information. Application Types Dkjb E Rqqewbk Uze Uel Turning

Condition: good (used), Year of construction: 2010, Functionality: fully functional, GENERAL Project No: 905696 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2010 Condition: Used Machine Programme run approx. [h]: 49.479 DESCRIPTION TURNING Max. turning diameter 210 mm Max. turning length 100 mm Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Dksb E Rqqsvfmdus Ujl Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Year of construction: 1970, Condition: ready for operation (used), Rotation diameter over bed/plane slide: 690mm/415mm, center height: 335mm, spindle bore: 128mm, drive power: 22kW, speed: 1400rpm. Documentation available. On-site inspection is possible. Djbswgcz Rs E Rqq Ujkl

Year of construction: 2003, Condition: refurbished (used), WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3 Deb E Rom Nb Syeqq Uokl

Condition: good (used), Year of construction: 1980, CNC Karuselldrehmaschine Fabr.JUNGENTHAL type: JU8F BJ. 1980 Modenisiert 2005 control HEIDENHAIN Manaul plus 4110. Max.Drehdurchmesser: 930mm Circular diameter max: 1100 mm Internal breakdowns min: 300 mm Turning length max. 520 mm Spindle speeds: gear-unit stage 1: 0-110 RPM Gear-unit stage 2: 110-300 RPM Power of main motor screw: 55-70KW Dkeb E Rqsdnznkoq Usl Complete machines documentaries available.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 92,000 h, Functionality: fully functional, turning length: 1,097 mm, turning diameter over cross slide: 455 mm, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, tool mount: 40 mm, total height: 2,130 mm, total length: 5,560 mm, chuck outer diameter: 315 mm, total width: 2,400 mm, quill stroke: 120 mm, quill diameter: 120 mm, overall weight: 8,900 kg, spindle diameter: 90 mm, We would like to get rid of our CTX500 due to a new purchase. The machine was built in 2002 and has since then done 91,535 hours for our company. The CTX500 is a 2-axis universal lathe with a partial hollow clamping device and has a chip conveyor, a tailstock, a three-jaw chuck SMW KNCS-N 315 and a tool carrier with 12 stations. It is fully functional and without any restrictions as it is and has been serviced at regular intervals. If you are interested, we could inspect the machine during a viewing and carry out a test run as it is still running as a production machine and is therefore under power. A sale would be possible immediately, handover possible in week 19 2025. Here are a few more technical details about the machine: Working area: - Swing diameter over bed track cover 680 mm - Swing diameter over face guide 455 mm - Chuck diameter 250/315 mm - Face stroke 320 mm - Longitudinal stroke 1097 mm Headstock: - Spindle head (flat flange) 220 h5 mm - Spindle diameter in the front bearing 140 mm - Spindle bore 107 mm Main drive: - Power of the three-phase main drive 23 kW - Speed range 18-3600 rpm Tool carrier: - Number of tool stations 12 (Tool holder according to DIN 69880 (VDI 3425) - Cylinder shank diameter 40 mm - Switching time 30° 0.86 sec. 180° 1.62 sec. Tailstock: - Quill diameter 120 mm - Quill holder MK 5 - Quill stroke 120 mm - Quill force max. 1400 daN Hydraulics: - Capacity approx. 30 l - Max. pressure 80 bar - Pressure for clamping device max. 80 bar Coolant device: - Capacity approx. 220 l - Pump output 1.7 kW - Delivery rate at 6 bar 20 l/min Fresh oil lubrication: - Capacity approx. 5 l Electrical connection: - Total connected load approx. 58.5 kVA - Voltage 400 V - Frequency 50 Hz Dksb E Rqsvzy Dtsq Ujl - Fuse (slow) according to VDE 0100 100 A - Permissible voltage fluctuation at 400V (+/-) 10 % Ambient conditions: - Permissible ambient temperature from +15 to +35° C - Max. relative humidity 75 % - Max Installation altitude 1000 m above sea level Weights: - Net weight of the machine without chip conveyor approx. 8700 kg - Gross weight of the machine when transported by truck approx. 8900 kg Dimensions: - Machine with chip conveyor L x W x H approx. 5560 x 2400 x 2130 mm We are of course happy to answer any further questions you may have. Please just contact us.

Year of construction: 2007, Condition: ready for operation (used), General Data Measurements width 2000 mm Measurements depth 3900 mm Measurements height 2200 mm Control Unit Brand INDEX Model C200-4D Main Drive Spindle speed range 7000 Number of axis 4 Movement X-Axis Movement 70 mm Y-Axis Movement 70 mm Z-Axis Movement 250 mm Debswblalj E Rqq Uskl This 4-axis Index C100 was manufactured in 2007. A robust horizontal turning machine, it offers precision and efficiency for complex turning operations. If you are looking to get high-quality turning capabilities, consider the Index C100 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2001, Condition: reconditioned (used), GENERAL Project No: 905398 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2001/2022 Condition: Retrofitted Machine Shifts approx.: 2-3 shift DESCRIPTION Deb Eoiix N Uj Rqq Uokl TURNING Max. Swing diameter over bed cover 210 mm Max. Clamping chuck diameter 170 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 134/85 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 Speed tool drive 6000 1/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Total power requirement 28 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 5500 kg REMARKS We offer a professionally retrofitted machine. All crucial components, like guideways with roller carriages, ball screws, main spindle, bearings in turret and tool drive etc. have been replaced. Please also see attached document. . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: excellent (used), Year of construction: 1999, CNC Control: MSD-501II (FANUC 18i-T) X-axis mm: 210 Z-axis mm: 550 Y-axis mm: - Maximum Turning Diameter mm: 250 C-axis Increment: 0.001 Maximum Turning Length: 500 Cutting Feed mm / min X, Z, Y: - Travel over Bed mm: Ø Travel over Carriage mm: Ø Dsb Eswf E Ans Rqq Ujkl Bar Pitch mm: Ø 51 Max Rapid Traverse m / min X,Z: 18.24 Main Spindle 6" Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Spindle Bore: - Main Spindle Nose A2-6 Sub-Spindle Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Sub-Spindle Bore mm 41 Sub-Spindle Nose A2-5 Turret Positions 12 Number of Live Tool Stations 12 Live Tool Speed rpm: 3,000 Live Tool Power kW: 5.5 EQUIPMENT Chip Extractor Bar Loader 10-65 Bar Loader Interface Manuals Included Basic Fixed Tool Holder Equipment 1 x Axial and 1 x Radial Power Tools

Year of construction: 2007, Condition: refurbished (used), CNC-TURNING-BORING-MILLING CENTRE M35 MILLTURN WITH TAILSTOCK AND CONTROL SINUMERIK 840D PL WORKING RANGE center distance mm 2000 max. turning diameter mm 420 longitudinal travel (Z) mm 2150 cross travel (X) mm 550 distance spindle flange to center mm 2300 turning length mm 2090 URNING SPINDLE spindle head DIN 55026 form A size 8 spindle diameter in front bearing mm 160 Dobsm H Tutj E Rqq Uskl spindle bore mm 77 MAIN DRIVE Built in motor drive power 100%(40%) duty cycle kW 29(33) max. speed min-1 4000 max. torque at the spindle 100%(40%) duty cycle Nm 550(630) AILSTOCK - MECHATRONIC Movement via AC-servodrive,mechatronic function Rapid traverse motion m/min 10 Feed force programmable daN 1200 Installed live center MK 5 TOOL HOLDER (single tool holder, Turning-Drilling-Milling Unit) C-drive drive power 100%(40%) duty cycle kW 15(20) speed range max. min-1 9000 max. torque at the spindle 100%(40%) duty cycle Nm 125(165) max. torque at the B-axis Nm 900 travel vertical to the X/Z-plane (Y-axis) mm 250[-100/+150] pivot capability of the milling spindle (B-axis) ° +/-110 tool accommotation suitable size 63 spindle diameter in front bearing mm 80

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Deb E Rqqjvi Hryo Uokl Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: good (used), Functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm 3 speeds for clockwise rotation and 3 speeds for anti-clockwise rotation Dsb E Rqswa Tubeq Uokl

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, General Data Machine weight 6000 kg Main Drive Number of axis 3 Media Main electronic connection 40 kVA This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Application Types Turning Dksb E Rqswbk U Ieq Uol

Condition: good (used), Year of construction: 2018, operating hours: 28,500 h, Functionality: fully functional, GENERAL Project No: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of Manufacture: 2018 Condition: Used Machine Programme run approx. [h]: 28.500 DESCRIPTION TURNING Max. turning diameter 210 mm Max. turning length 100 mm Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit with paperband filter Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Dkeb E Rqqory Uhwo Uol Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: good (used), Year of construction: 2011, spindle diameter: 52 mm, Equipment: documentation/manual, Turn-Mill Center Manufacturer: Mori Seiki Type: NZ 1500 Year of manufacture: 2011, iBN: 2012 TECHNICAL DETAILS Swing over bed: 800 mm Turning diameter: 300 mm Turning length: 810 mm Bar capacity/bar throughput: 52 mm Speed: 6000 rpm Spindle power: 22 kW Dob E Rqqov Iy A Ae Uekl Y-axis: +65 / -45 mm Control: Fanuc, model F31iA with MAPPS IV dialog programming Additional features: Polygon turning, RAM expansion to 1 MB, max. 1000 storable part programs, synchronous thread cutting, hobbing function on main and sub-spindles, tailstock function, holding brake on main and sub-spindles, workpiece unloading system Number of turrets: 2 Number of tool positions: 2 x 16 Pieces Speed of driven tools: 6000 rpm MACHINE DETAILS Weight: 8100 kg Connected load: 81 kVA On-time: 37,116 h on March 12, 2025 Machining time turret 1 / 2: 8,815 / 5,794 h EQUIPMENT Extensive tool selection: - 4 straight driven tools - 1 milling head - 4 angle heads - 1 double angle head - Approx. 16 static tool holders The machine has been fitted with a new main spindle bearing; its geometry is still in excellent condition. All holders, tools, and drive units are included.

Condition: good (used), comes with a blue mobile cabinet with some spare parts Dkob Eov Rw T Dj Rqq Uel

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Dkjb E Rqjvbb U Hoq Uel Machine documentation available .

Year of construction: 2023, Condition: ready for operation (used), Control Unit Brand SIEMENS Model C200-sl Dkeb E Rqowblb Aeq Usl Main Drive Spindle speed range 6000 rpm Spindle motor power 32kW Stroke 20mm Number of axis 5 Movement Z-Axis Movement 700 mm Z-Axis Feed Force 5000N Z-Axis Rapid Traverse 50m/min Additional Equipment Software options: OPC UA for master computer connection (max. 200 variables). ChipMaster cycle for chip breakage control. Environmental data: Noise level: 73.8 dB(A) This 5-axis Index C200 was manufactured in 2023, offering advanced capabilities for horizontal turning. Ideal for precision and efficiency in metalworking, this machine represents a significant asset for enhancing production quality. Consider the opportunity to buy this Index C200 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, GENERAL Project No.: 905732 Quantity: 1 pc. Manufacturer: TRAUB Type: TNL 18 Deb E Rqqov Tbd Ee Uokl Control: Traub TX 8i-s Year build: 2011 Condition: Used Machine Spindle on approx. (hrs): 28381 Programme run approx. (hrs): 36646 DESCRIPTION TURNING Max. turning diameter 20 mm Max. speed main spindle 10000 1/min Max. power main spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque main spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore main spindle 20 mm Axis at main spindle unit Z/C Headstock stroke main spindle 205 mm Max. rapid traverse in X/Y/Z main spindle unit -/-/40 m/min Hollow clamping cylinder at main spindle Max. speed opposed spindle 10000 1/min Max. power opposed spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque opposed spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore opposed spindle 20 mm Axis at opposed spindle unit X/Z/C Travel in X/Y/Z opposed spindle unit 100/-/262 mm Max. rapid traverse in X/Y/Z opposed spindle unit 20/-/40 m/min Upper turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-40 bis +25/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min Lower turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-20 bis +40/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Machine operates/operated with oil Coolant unit with paperband filter High pressure pump 50 bar Automatic CO2-fire extinguishing system Part outfeed conveyor Finish-part pick-up unit Bar loader/magazine make FMB minimag 20 Max. bar length 3200 mm ACCESSORIES 2 pc. Collet chuck 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools 1 Set Spare Parts for the machine (i.e. Mitsubishi Power modules, etc.) 1 Set Changing tubes GENERAL TECHNICAL DATA Total power requirement 24 kVA Machine dimensions (LxWxH) approx. 3060 x 1460 x 2250 mm Machine weight approx. 4000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.