Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m Fpodoy E Np Sjpfx Ap Den horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,812 h, functionality: fully functional, machine/vehicle number: 108877, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 850 mm, table load: 800 kg, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 900 mm Y-axis: 780 mm Z-axis: 850 mm Distance from spindle center to pallet surface: 50 – 950 mm Distance from spindle nose to pallet center: 70 – 850 mm Pallet Pallet size: 500 × 500 mm Indexing angle: 1° Max. workpiece dimensions: 800 × 1,000 mm Max. workpiece weight: 800 kg Spindle Spindle speed: 50 – 20,000 rpm Spindle taper: HSK Rapid traverse & feed rate Rapid traverse (X/Y/Z): 60 m/min Fodexyiq Njpfx Ap Depn Feed rate (X/Y/Z): 1 – 60,000 mm/min Tool system (ATC) Tool holder: HSK Max. tool diameter (adjacent tool): 100 mm Max. tool diameter (no adjacent tool): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Dimensions & Weight Machine height: 3,280 mm Footprint (W × D): 3,080 × 5,585 mm Weight: 21,000 kg Operating Hours Spindle hours: 13,812 h Operating hours: 15,544 h Power-on hours: 33,469 h EQUIPMENT 2-pallet rotary table (APC) Splash guard Coolant supply system Chip air blow (nozzle system) Internal chip conveyor (floor-based system) Spindle head cooling system Worklight (fluorescent) Signal tower (3-stage) Foundation pads Clamping bolts

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 18275, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Fpjdey Rmz Aopfx Ap Den Machine from the production of highly precise components for CNC rotary tables. Not a job shop machine. TECHNICAL DETAILS Travel in X-axis: 650 mm Travel in Y-axis: 650 mm Travel in Z-axis: 650 mm C-axis: 360°/continuous High-speed spindle speed max.: 10,000 rpm Spindle taper: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control system: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer + storage tower with 6 positions for up to 8 pallets Note: The machine has been shut down by a qualified electrician and professionally prepared for transport.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,500 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: CNC OSP 100M, rotational speed (max.): 5,000 rpm, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 800 mm Fsdpfey S S U Dox Ap Dspn Travel range, Z-axis: 700 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Spindle speed: 25 - 5,000 rpm Type of input current: Three-phase Pallet size (2x): 500 mm x 500 mm Table size: 500 mm x 500 mm Table load: 800 kg Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Tool length max.: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Dimensions (L x W x H): 5,500 mm x 3,160 mm x 3,300 mm Machine weight: 21,000 kg Spindle hours: 18,500 h EQUIPMENT Chip conveyor Coolant system Pocket filter system for internal cooling Spindle speed, continuously adjustable

Condition: excellent (used), Year of construction: 1990, Mori Seiki MV-40 machining center Year: 1990 Fpedpfjy S T D Tsx Ap Djn

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,300 mm, table load: 2,000 kg, Travel Paths Travel path X: 1450 mm (longitudinal) Travel path Y: 1100 mm (vertical) Travel path Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg Spindle & Drives NC rotary table with direct drive Positioning: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool Changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Accessories: - Coolant through spindle - Coolant shower - Tool breakage detection in tool changer - Spindle motor load monitoring - Spindle extension by 100 mm - Electronic handwheel - Various tools Fpedpfxoy Idyko Ap Den

Condition: like new (used), Year of construction: 2014, Horizontal machining center OKK Rotary pallet Type HM6300S Fedezr Ih Depfx Ap Depn Year 2014 CNC Fanuc series 31i-model B5 60-tool magazine Chip conveyor Approximately 30 tool holders with ISO 50 connection Tilting and forklift-compatible chip bin from GOUBARD Inspection points with shelves and lighting Double-sided tool display stands Buffer tank Aluminum structure platform

Condition: like new (used), Year of construction: 2017, Horizontal machining center OKK Rotary pallet Fpodpezr Iihsfx Ap Don Type HM630 Year 2017 CNC Fanuc Series 310i-s model Chip conveyor Approximately 3 tool holders with ISO 50 mounting Tilting and forklift-compatible chip bin by GOUBARD Inspection points with shelves and illuminated fan Double-sided tool displays Buffer tank

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 80.4308.0097, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, controller model: FANUC Professional 3, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 900 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 970 mm Pallet size: 630 mm × 630 mm Number of pallets: 2 Max. workpiece weight: approx. 1,200 kg Spindle connection: HSK-A100 Max. spindle speed: 12,000 rpm Tool magazine: 188 positions Tool change time: approx. 1.7 s Rapid traverse: up to 50 m/min MACHINE DETAILS Control system: FANUC Professional 3 Machine weight: approx. 18 t EQUIPMENT Dual-pallet system Large 188-position tool magazine Automatic tool changer Through-spindle coolant / coolant system Chip conveyor NC rotary table Network/DNC connection Fedezhl A Ropfx Ap Djpn Note: The machine was previously connected to a pallet loading station. The pallets can, of course, also be loaded manually.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 54, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,100 mm, feed length X-axis: 1,400 mm, nominal power (apparent): 170 kVA, controller manufacturer: siemens, controller model: Siemens Sinumerik 840Dsl, workpiece length (max.): 1,100 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 1,100 mm, workpiece weight (max.): 2,500 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hello, I am selling a DIXI DH 100 II: a 4-axis, dual-pallet CNC milling machine from 2012. Price: 690,000 PLN net. Machining range: X = up to 1400, Y = 1100, Z = 1100 (workpiece weight up to 2500 kg) Spindle: 12,000 RPM, 36 kW Tool holder: HSK A 100 Table: 1000x1000, 2 pcs Tool magazine: 150 positions Coolant through spindle: 70 bar Configuration: Base machine Universal horizontal machining center DIXI DHP 100 4-axis version Control system Siemens SINUMERIK 840DSL Main drive Electric spindle 12,000 RPM Magazine 200-position tool magazine HSK 100 Machine table 2 pallets, 1000 x 1000 mm Cooling / chip removal Chip conveyor with 6 bar pump Coolant tank: 1,400 l Internal coolant supply: 70 bar Cooling unit: CSW2200 PMS Measurement / control Renishaw 3D RMP60 probe BLUM laser probe for tool measurement Additional options 2x Manual rinsing of the machining area – gun Manual control panel (handwheel) Fedpfx Apozlxmdj Dspn 4-color signal lamp Losma oil mist extractor 3 working modes Rotating window in the machine door Automation Automatic pallet changer Documentation Operating manual and electrical diagrams Monitor language English Training Not included

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 288-40003902, travel distance X-axis: 800 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, table width: 500 mm, table length: 630 mm, For sale is a horizontal machining center DMC 80 H hi-Dyn with 4 axes. The machine has only been used for milling and drilling cast parts for surface finishing. The spindle is in very good condition. Technical specifications: Travel paths: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm B-axis: 360° Table data: Table size: approx. 630 × 500 mm Max. workpiece weight: ~1,200–1,400 kg Rotary table: 4th axis, 360° continuous Spindle: Direct drive, liquid cooled Replaced in 2023/2024 Measuring system: Glass scales Main drive: Max. speed: up to 10,000 rpm Spindle power: approx. 20 kW Torque: S1 – 100% duty cycle Transport dimensions: LxWxH in meters: 5.2 x 2.4 x 2.7 Fpodpfxeytf N Ao Ap Den Machine transport weight: 12,500 kg Dismantling, loading, and transport throughout Europe can be organized upon request for an additional charge. All prices are plus VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES ETC. Are you looking for a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 1991, x-travel 710 mm y-travel 510 mm z-travel 510 mm Control Mazatrol M 32 size of pallet 500x500 mm spindle taper ISO 40 turning speeds 50-10000 U/min Spindle capacity 7,35 KW tool magazin: 60 numbers of pallets 6 weight of the machine ca. 8,5 t Accessories: Screw conveyorThe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Fjdpfoyutp Tex Ap Depn than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1999, operating hours: 24,364 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Fanuc MSC 501 (Fanuc 16i), spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle speed range: 10,000 rpm Spindle motor power: 22 kW Rapid traverse (x/y/z): 32 mm/min Tool magazine capacity: 40 (SK40) Pallet size: 2 x 400 x 400 mm Table load: 0.5 t Table indexing: 1° MACHINE DETAILS Control: Fanuc MSC 501 (Fanuc 16i) Total power requirement: 56 kVA Dimensions & Weight Required space: approx. 2.9 x 4.1 x 3 m Machine weight: approx. 8.7 t Operating hours: 24,364 h Fpodpfx Aeyc Unmjp Djn EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment Fedpfx Aeyi Ekfsp Dspn • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 80.4308.0097, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, controller model: FANUC Professional 3, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Fjdpfx Aszb Efyjp Dspn Travel range, X-axis: 900 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 970 mm Pallet size: 630 mm × 630 mm Number of pallets: 2 Max. workpiece weight: approx. 1,200 kg Spindle connection: HSK-A100 Max. spindle speed: 12,000 rpm Tool magazine: 188 positions Tool change time: approx. 1.7 s Rapid traverse: up to 50 m/min MACHINE DETAILS Control system: FANUC Professional 3 Machine weight: approx. 18 t EQUIPMENT Dual-pallet system Large 188-position tool magazine Automatic tool changer Through-spindle coolant / coolant system Chip conveyor NC rotary table Network/DNC connection Note: The machine was previously connected to a pallet loading station. The pallets can, of course, also be loaded manually.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Fpedpfxjzd Tcde Ap Dsn Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: ready for operation (used), operating hours: 41,072 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Spindle speed: 12,000 rpm Feed rate: 20-10,000 mm/min Rapid traverse rate, X/Y/Z-axis: 26/26/20 m/min Number of tool changer positions: 20 Spindle taper: SK 40 Table clamping surface (L x W): 1,000 x 600 mm MACHINE DETAILS Control model: Heidenhain TNC 430 Total power consumption: 26 kW Fpjdpfx Apezd Aw Ds Djn Operating hours: 41,072 h Machine weight: approx. 6.5 t EQUIPMENT B-axis (NC milling head) Electric handwheel Chip conveyor Cooling system

Condition: used, Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 710 mm, controller manufacturer: Fanuc, controller model: 160is-MB, total height: 2,771 mm, total length: 5,855 mm, total width: 2,555 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 8,200 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, CNC Horizontal Machining Centre CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Fpodpoy N Ax Uofx Ap Djn Z-axis travel: 710 mm Indexing of table 0,001° Spindle holder MAS BBT 40 Spindle speed 100 - 12.000 rpm Spindle motor 11/7,5 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. We sell this machine at a special price called “as seen”. This means that we do not check the condition of the machine.

Condition: used, Year of construction: 2002, x-travel 630 mm y-travel 630 mm z-travel 630 mm Control Siemens type 840 D size of pallet 400x500 mm numbers of pallets 4 360 ° turning speeds 10-16000 U/min Tool changer 160 Pos. spindle taper: HSK 63 total power requirement 55 kW weight of the machine ca. 11 t Machine with Siemens 840 D control for 4 axes - Digital drive technology, direct position measuring systems - 4-position pallet changer - Full B-axis - Coolant system with internal coolant supply - Hydraulic workpiece clamping - Filtration system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Fjdpfx Apoyqt Axo Djpn We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2017, x-travel 700 mm y-travel 700 mm z-travel 700 mm Control Siemens type 840Dsl Number of spindles 2 St. Double reversible clamp The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Fodpfxeyquarj Ap Depn About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1999, x-travel 1250 mm y-travel 910 mm z-travel 875 mm Control Siemens type 840 D size of pallet 800x800 mm numbers of pallets 2 turning speeds 20-6000 U/min transmission ratio 2 Feed 1-32000 mm/min 360x1 ° turning speeds 16,5 U/min Table load 1150 kg spindle taper ISO 50 Tool changer 165 Pos. weight of the machine ca. 18,5 t Fpodpfx Apoyqu D Rj Djn IKZ 70 bar B - NC rotary table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 750 mm z-travel 770 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 10000 U/min rapid traverse 35 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 15 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Fpodpfeyqu Najx Ap Den possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 40, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and an automatic tool changer with 40 positions. The machine is equipped with twin pallets and offers an XYZ travel of 630 x 630 x 630 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. • Pallet system: Twin pallet Technical Specification Taper Size SK 40 Fodpfoy Ef Idox Ap Dspn

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Note: The machine has already been dismantled. Fpsdoy Atwuspfx Ap Dsn

Condition: used, Year of construction: 1999, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller model: FANUC 18i, spindle speed (max.): 12,000 rpm, spindle motor power: 8 W, number of slots in tool magazine: 64, Horizontal machining center, 4 axes (X Y Z B - 360000) Fedjy Azbzjpfx Ap Depn Automatic pallet changer, 2 positions, size 400-400 mm Automatic tool changer, 64 stations Tool change time: 3 seconds CNC control: Fanuc 18i Motor drive: Fanuc