Condition: ready for operation (used), Year of construction: 2000, Main Drive Number of axis 3 Spindle Speed 10000 RPM Movement X-Axis Movement 1000 mm Iedpfx Abjx Enkujcehw Z-Axis Movement 600 mm Y-Axis Movement 600 mm This 3-axis Quaser MV 204 II was manufactured in 2000. It features a spindle speed of 10,000 rpm and a CNC control system by Selca 3045 PD. The machine includes a magnetic table measuring 630 mm x 400 mm and a tool magazine with 20 positions. If you are looking to get high-quality milling capabilities, consider the Quaser MV 204 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand FANUC Model 31i model B5 Main Drive Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Z-Axis Movement 330 mm Workpiece Isdox D Ixgspfx Abcjhw Workpiece weight 300 kg Table Outer length 850 mm Outer width 410 mm Tools Slots in storage 21 Additional Equipment Chip conveyor: A carpet This 4-axis FANUC Robodrill Alpha-D21LiB5 was manufactured in 2016. A vertical machining center featuring a 4th axis continuous table, spindle speeds up to 10,000 rpm, and a high-pressure system through the spindle at 15 bar. With less than 2000 working hours, it includes a tool magazine with a capacity of 21 and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the FANUC Robodrill Alpha-D21LiB5 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, General Data Ihsdex D Nhcjpfx Abcjw Measurements width 3750 mm Measurements depth 3723 mm Measurements height 3370 mm Machine weight 12000 kg Main Drive Spindle speed range 30000 rpm Movement X-Axis Movement 1000 Y-Axis Movement 620 Z-Axis Movement 500 This 4-axis Fidia K 165 BSH was manufactured in 2002. It features a PCN775 control unit and a main spindle with a speed range up to 30,000 rpm. The machine dimensions are 3723 mm in length, 3750 mm in width, and 3370 mm in height, supporting a maximum table load of 2000 kg. If you are looking to get high quality milling capabilities consider the Fidia K 165 BSH machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, Main Drive Spindle speed range 50–18000 Tool taper HSK-A63 Wire diameter 70 mm Number of axis 3 Movement X-Axis Movement 1200 mm X-Axis Rapid Traverse 48000 mm/min Y-Axis Movement 730 mm Y-Axis Rapid Traverse 48000 mm/min Z-Axis Movement 650 mm Isdpfxjx D I Ihe Abcehw Z-Axis Rapid Traverse 48000 mm/min Table Number of tslots 7 Table load 1000 kg Tools Number of index 24 Max weight 8 kg Max tool diameter 75 mm Max tool length 300 mm This 3-axis MICROCUT V-30 vertical machining center was manufactured in 2013. It features a table size of 1400 × 710 mm, capable of handling a maximum load of 1000 kg. The spindle operates at speeds up to 18,000 rpm with a power of 20 kW. Rapid feed rates reach 48,000 mm/min, enhancing productivity. If you are looking to get high-quality milling capabilities, consider the MICROCUT V-30 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 6500 kg Main Drive Spindle speed range 12000 Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 730 mm Y-Axis Movement 450 mm Ihedpfx Aex D Hx Sjbcsw Z-Axis Movement 470 mm Table Table load 200 kg Tools Number of index 48 This 5-axis Mazak CV5-500 was manufactured in 2020. It features a 500 × 500 mm table, can handle a maximum load of 200 kg, and offers X/Y/Z travels of 730/450/470 mm respectively. The spindle supports up to 12,000 rpm with a power of 18.5 kW. It includes a 48-position tool magazine and a machine weight of 6,500 kg. If you are looking to get high quality 5-axis machining capabilities consider the Mazak CV5-500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 2495 mm Measurements depth 3870 mm Measurements height 3000 mm Machine weight 8440 kg Main Drive Spindle speed range 12000 Tool taper ISO 40 Number of axis 3 Movement X-Axis Movement 1350 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 640 mm Y-Axis Rapid Traverse 30 m/min Ihjdpfox D N Atex Abcow Z-Axis Movement 660 mm Z-Axis Rapid Traverse 25 m/min Tools Max weight 7 (15) kg Max tool diameter 65 (130) mm Max tool length 250 mm This 3-axis Akira Seiki 5.5 was manufactured in 2020. It features a robust Fanuc 0i CNC control, with travel dimensions of 1350x640x660 mm and a spindle speed of 12,000 rpm. The machine includes a 28-tool magazine and a 4th-5th axis rotary table by TJR. Ideal for precision machining with its rapid traverse rates up to 30 m/min and a high-pressure coolant system at 20 bar. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm Ihjdpfx Ajtuggcobcsw z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, FANUC ROBODRILL ALPHA T21 i FIa is a Vertical machining center delivering precision, high accuracy and reliable performance. Working capacities: table 850 x 400 mm, table load max 300 kg, travels X700 mm, Y400 mm, Z330 mm, total 5 axes, spindle nose-to-table 250–580 mm, tool magazine 21 positions, max tool weight 23 kg. Main technical specs: stepless spindle 100–24,000 t/min, rapid traverse 54 m/min, spindle power 5.5 kW, supply 3x 400 V 50 Hz, total installed power 11 kVA; machine weight ~2200 kg; footprint L2140 x W2000 x H2350 mm. Achieves tight tolerances; suited for automotive, watchmaking, machine tool, aerospace and medical applications. Ihjdpfx Aoyugyrobcow

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, X-axis 1,500 mm Y-axis 660 mm Z-axis 600 mm Table size 1,680 x 660 mm Spindle speed 12,000 rpm Tool holder SK40 Tool changer 24 positions Ijdpfx Ajxm Tufobcjhw Control ULTIMAX 4 Incl. 4th axis Kitagawa MR 200 (rotary axis + tailstock) Incl. chip conveyor Incl. internal coolant (IKZ)

Condition: excellent (used), Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, controller model: FANUC 21iMB, overall weight: 7,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, The used VICTOR A110 vertical machining center is a small/medium-sized 3-axis continuous CNC machining center; table size 1350×600 mm, X travel 1,100 mm, Y 600 mm, Z 560 mm, year of manufacture 2011 (installed in 2013), CE-compliant, equipped with FANUC 21i-MB CNC with Manual Guide i, rapid feed of 42 m/min, axis acceleration of 0.75G, working feed of 12 m/min, weight 7,400 kg. Ihodpfxox Hap Ej Abcjw It is equipped with a BT-40 milling spindle, 12,000 rpm, 15 kW, cooled by dedicated chiller, belt-type chip conveyor, double internal auger, tank washing system, high-pressure through-spindle coolant, 32-position random tool changer, door, memory card slot, Ethernet RJ 45 port, and RS 232 serial port. Only just over 13,000 power-on hours and 7,000 spindle hours (original). PERFECT WORKING CONDITION!

Condition: used, Year of construction: 2003, DECKEL MAHO - DMU 125P HI-DYN - 2003 - 3+2 axis - system heidenhain TNC530 - moves X/Y/Z=1250/880/800 mm - C and B axis - rotary table 1250x1000 mm Ihsdpfx Aboyulc Socjw - table load 2000 kg - spindle RPM 20-18000 - spindle motor 28 kW - spindle running hours 29217 - weight 7500 kg

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, Initial commissioning: 2014 Control: Fidia C40 Vision Working Areas X-axis approx. 850 mm Y-axis approx. 950 mm Z-axis approx. 600 mm Rotary Swivel Table RT A-axis ±125° C-axis 360° continuous Clamping Table Diameter: 800 mm T-slots: 4+1 (H7)x18mm T-slot spacing: 160 mm Max. table load: 1,200 kg Max. turning diameter: 1,000 mm Milling Head Spindle power: 30 kW Max. spindle speed: 24,000 rpm Torque: 105 Nm Iedpeytfy Iofx Abcehw Tool interface: HSK 63A Tool clamping: hydraulic Linear Axis Drives Feed rate X, Y, Z axes: approx. 45 m/min Dimensions, Weights Machine footprint without control cabinet: approx. 4,000 x 4,700 mm Required height: approx. 3,700 mm Total weight: approx. 17,000 kg Additional Equipment - 42-position tool changer - Wet machining with belt filter system - Chip conveyor Machine Condition The table has been completely overhauled, but there are still issues with the Fidia control system. An additional investment of around €25,000 is required for new Fidia control cards.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, table width: 711 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 10,887 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2024. It features a spindle speed of 12,000 rpm and a robust table size of 1,626 x 711 mm, with a maximum weight capacity of 1,814 kg. The machine includes a tool changer capacity of 30+1 and a rapid traverse rate of 15.2 m/min. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table: max 864 mm (34.0 in), min 102 mm (4.0 in) • Spindle • Max torque: 122.0 Nm @ 2000 rpm (90.0 ft-lbf) • Drive system: Inline direct-drive • Taper: CT40 | BT40 | HSK-A63 • Lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 1626 mm (64.0 in) • Width: 711 mm (28.0 in) • T-slot width: 15.90–16.00 mm (0.626–0.630 in) • T-slot center distance: 125 mm (4.92 in) • Max weight on table: 1814 kg (4000 lb) Ihedpfx Aboyt Riuocew • Feedrates and thrust • Max cutting feedrate: 12.7 m/min (500 ipm) • Rapids (X/Y/Z): 15.2 m/min (600 ipm) • Max thrust X: 15,124 N (3400 lbf) • Max thrust Y: 18,238 N (4100 lbf) • Max thrust Z: 24,910 N (5600 lbf) • Tool changer • Type: SMTC (side-mount) • Capacity: 30+1 • Max tool diameter (full): 64 mm (2.5 in) • Max tool diameter (adjacent empty): 127 mm (5.0 in) • Max tool length: 406 mm (16 in) • Tool-to-tool time (avg): 2.80 s • Chip-to-chip time (avg): 3.60 s • Utilities • Coolant capacity: 360 L (95 gal) • Air required: 113 L/min @ 6.9 bar (4 scfm @ 100 psi) • Minimum air pressure: 5.5 bar (80 psi) • Electrical • Input AC voltage (3-phase) low: 220 VAC, full load amps: 70 A • Input AC voltage (3-phase) high: 440 VAC, full load amps: 35 A Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: Ihedpfxsyt Rdrj Abcew • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel • Rinsing gun • Chip conveyor Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, table load: 100 kg, spindle speed (max.): 42,000 rpm, number of axes: 3, This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping surface of 450 × 400 mm. The integrated tilting rotary table allows for a tilt range of -15° to +130°, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 20 vertical machining centre we have for sale. Contact us for further details. • Fixed table with T-slots • Clamping surface: 450 × 400 mm • Spindle interface: HSK-E32 Iodpfx Ajyt Nxzsbcshw • Spindle torque: 6 Nm (S1 100%), 7.5 Nm (S6 40%) • Automatic tool changer, pickup system • Tool magazine capacity: 24 tools (HSK-32) or 22 tools (HSK-40) • Air blow through spindle axis • Ethernet interface ready • CELOS control system with Siemens 840D sl Operate • 21.5” ERGOline touchscreen control panel • CAD/CAM connectivity • Compatible with PPS/ERP systems • 5-axis precision package • Integrated tilting rotary table • A-axis tilt range: -15° to +130° • C-axis rotary table diameter: Ø250 mm • C-axis integrated torque motor • Maximum rotary speed: 50 rpm • 4-color machine status signal lamp • Remote diagnostic capability (DMG MORI NETSERVICE) • IoT connectivity (DMG MORI IoTconnector) • Remote service monitoring (Service Agent) • Machine installation and commissioning included • 3D STEP model for CAD integration • Permanent lubricated spindle Additional equipment • Automatic pallet/part handling automation PH10 • Linear magazine automation system • Pallet capacity: up to 132 positions (ITS 50) or 66 positions (ITS 115) • Maximum workpiece height (automation): 260 mm • Machine transport lifting device • Machine packaged for truck transport

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, total height: 2,000 mm, total width: 1,600 mm, overall weight: 5,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 6,000 W, product length (max.): 7,500 mm, number of axes: 3, This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details. • Control: Industrial PC with eluCam software; 15" colour monitor • Turret/tooling: 8-position rotating turret head with 8-position tool changer Iedsyt Ifyopfx Abcshw • Rapid traverse: X 60 m/min; Y 30 m/min; Z 30 m/min • Tool interface: BT30 • Collet systems: ER25 / ER32 • Saw blade diameter: approx. 300–420 mm Technical Specification Taper Size BT 30

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 305 mm, feed length X-axis: 762 mm, feed length Y-axis: 406 mm, feed length Z-axis: 305 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 406 mm - Z-axis travel: 305 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 507 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system Ihodpeyanlasfx Abcjw - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of axes: 3, This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details. Isdpfx Abjyt Hg Nscshw • Control system: Ferrocontrol CNC • Max. machining length: approx. 4200 mm • Machining length with end machining: approx. 4080 mm • Spindle: • Type: High-speed milling spindle • Tool system: • Tool changer: Turret head • Tool positions: 8

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, controller manufacturer: Heidenhain, For sale: Used DMC 635 – Powerful Vertical Machining Center Upgrade your production processes with this robust and high-performance DMC 635 from DMG MORI! This vertical machining center is ideal for a wide range of milling applications, offering excellent performance when machining various materials. Key Features: • High rigidity and stability: Ensures precise machining results and long service life. • Large working area: Provides ample space for processing large workpieces. • High spindle speed: Enables fast and efficient machining operations. • Sturdy construction: Guarantees longevity and reliable performance. • CNC control: Equipped with a user-friendly CNC controller for easy programming and operation. Iodpfx Aboytfzljcohw Additional Information: • Year of manufacture: 2006 • Condition: good, used • Control: Heidenhain iTNC530 • Travel paths: 635 x 460 x 510 mm • Spindle speeds: 20 – 10,000 rpm Ideal for: • General machining • Tool and mold making • Single-part and small-batch production • Mechanical engineering Why choose this DMC 635? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your machining capabilities and increase your productivity.

Condition: excellent (used), HAAS VF-2SS Ijdsyl I N Nepfx Abcohw YEAR OF MANUFACTURE: 2022 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Max. spindle speed: 12,000 rpm PulseJet system Additional coolant filter Through-spindle coolant (IKZ) Number of tools: 30+1 Taper type: BT40 / CT40

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, table load: 700 kg, overall weight: 12,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis WEMAS VZ 1000 vertical machining center was manufactured in 2007. It features an X-axis travel of 1000 mm, Y-axis travel of 610 mm, and Z-axis travel of 660 mm. The machine includes a robust table size of 1300 x 600 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1000 machine we have for sale. Contact us for further details. • Axes: 3 linear axes (X/Y/Z); 4th axis available via rotary table — see Additional equipment Iedeyttutjpfx Abcjhw • Electrical data: 35 kVA, 400 V, 3 + PE • Table size: 1300 × 600 mm • Tool changer: Swing-arm ATC, 20 tools Additional equipment • 4th-axis rotary table (mounted on the table) • Through-spindle coolant (CTS) • Tool measurement probe: Renishaw TS27R • Chip conveyor Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller manufacturer: FANUC, controller model: Series 31i, table width: 1,050 mm, table length: 4,100 mm, overall weight: 22,500 kg, spindle speed (max.): 3,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm. Machine Benefits Qualitative Machine Benefits • Very good condition! Iedsyttffopfx Abcohw Technical Machine Benefits • Spindle motor power 22/26kw

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, total height: 2,700 mm, total width: 2,400 mm, table load: 700 kg, overall weight: 5,000 kg, spindle speed (max.): 7,500 rpm, product length (max.): 2,400 mm, number of axes: 4, This 4-axis HAAS VCE 750 was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 400 mm, and Z-axis travel of 500 mm. The machine includes a table size of approximately 900 x 350 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VCE 750 vertical machining centre we have for sale. Contact us for further details. Ihsdpfjytqvhjx Abcow • Table size: approx. 900 × 350 mm • Tool magazine: 20 positions (carousel) • Included options: 4th axis; through-spindle cooling Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2006, X-Y-Z Axes travel:520x320x350mm Fanuc control system BT30 10000 rpm spindle APC Automatic Pallet Changer System Pallet size: 650x440 mm IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers Ijdpfx Aenyh Sqjbcshw *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: used, MIKRON HSM 800 ProdMod is a Vertical machining center engineered for precision, high accuracy and reliability. Working capacities: table 900×600 mm, max table load 800 kg; travels X800 × Y600 × Z500 mm. Main specs: spindle motor 12.5/22 kW, total power 26 kW, 3x 400 V 50 Hz, noise 75 dB(A), machine weight ≈8300 kg, dimensions L4000×W3700×H2500 mm. Equipment: 50‑position tool magazine (tool Ø max 75 mm, length 210 mm, max tool weight 2.5 kg). Delivers tight tolerances; typical applications: automotive, aerospace, medical, machine tools and watchmaking. Isdpfxjytu Hke Abcohw