Used other metal presses for sale (152)

Condition: used, TECHNICAL DETAILS Cedpfx Ajuhakueddsaa - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 1315 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((length-width-height)) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: ready for operation (used), Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024. Cajdsr I Abiopfx Addea

Condition: used, TECHNICAL DETAILS - See photos Caedpfx Asuhaknoddoa

Year of construction: 2018, condition: ready for operation (used), A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Cjdpfx Aswkiiioddsaa

Year of construction: 1992, condition: ready for operation (used), A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible. Csdpsvdu Nvjfx Addeaa

Condition: ready for operation (used), Press force: 400kN, stroke adjustment: 4mm-100mm, ram adjustment: 85mm, stroke rate: 200 strokes/min, throat depth: 225mm, installation height: 375mm, table dimensions X/Y: 640mm/450mm, ram area X/Y: 430mm/240mm, machine dimensions X/Y/Z: approx. 1200mm/1700mm/2200mm, weight: approx. 2600kg. On-site inspection is possible. Caedewn H Tmopfx Addoa

Year of construction: 2012, condition: ready for operation (used), A Sahinler workshop press is available. Press pressure: 150t, max. pressure: 244bar, working width: 1520mm, piston stroke: 300mm, ram dimensions X/Y: 200mm/1520mm, through hole: 100mm, table dimensions X/Y: 600mm/1520mm, max. installation height: 610mm. Forward speed: 9mm/s, retraction speed: 10mm/s, working speed: 5mm/s, drive power: 11kW. Machine dimensions X/Y/Z: approx. 2500mm/1000mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Codpfxov N I Ago Addoaa

Year of construction: 1998, condition: ready for operation (used), A Hymag hydraulic press is available. Pressing force: 15t, pressing pressure: 235bar, stroke: 250mm, drive: V30 D045, motor power: 7.5kW, oil requirement: 200l, run-on time: 40ms, safety distance: 80mm. The machine has a leak on the piston and the position measuring system is not working properly. Documentation available. On-site inspection is possible. Caedpjv Scrnjfx Addja

Condition: ready for operation (used), Press force: 10000kN, ram stroke: 350mm, stroke rate: 28rpm, overtravel: 102mm, overtravel time: 0.2s, safety distance: 330mm. On-site inspection is possible. Cjdewm Nndjpfx Addoaa

Year of construction: 1973, condition: ready for operation (used), Press force: 1250kN, ram stroke: 20mm-120mm, stroke rate: 50/min, overtravel: 54mm, overtravel time: 0.2s, safety distance: 320mm. On-site inspection is possible. Casdpfxjwm Nnke Addsa

Year of construction: 1998, condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Caedpfx Ajttbd Toddea

Year of construction: 1990, condition: ready for operation (used), Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible. Cjdpfx Ajwftdajddjaa

Condition: ready for operation (used), Pressing force: 10t, oil filling: 300l, max. pressure: 20bar, press type: C-column press, machine dimensions X/Y/Z: approx. 1250mm/1200mm/3000mm. On-site inspection is possible. Cajdet Uhz Njpfx Addsa

Year of construction: 1993, condition: ready for operation (used), Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible. Codpfev Tnytex Addeaa

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Caedpfxjvyirks Addja

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Casdpfxoum U Sxe Addoa

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Caedotva Dnepfx Addoa

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Codpfswhp Ndox Addoaa

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Cedpfxot Nhmhj Addeaa

Year of construction: 2018, condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Cajdpfsu Dal Hsx Addea

Year of construction: 2003, condition: ready for operation (used), Single stroke: 100/min, continuous stroke: 200/min, ram table top distance: 180mm, working area depth: 150mm, table top dimensions X/Y: 370mm/270mm, stroke: 10mm/40mm, hole diameter: 25mm, weight: approx. 530kg. On-site inspection is possible. Cajdpewzx S Isfx Addja

Year of construction: 1982, condition: ready for operation (used), Stroke speed: 57-86/min, ram adjustment: 63mm, including documentation. Cedpfoi Ati Nex Addsaa

Year of construction: 2003, condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Caedpfx Aeu Dalyjddsa

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Codpfx Adju N Hc Nodsaa

Condition: ready for operation (used), Press force: 160t, stroke adjustment: 20mm-140mm, stroke rate: 10-60 strokes/min, table dimensions X/Y: 1050mm/820mm, opening in table: 300mm/300mm, ram adjustment: 100mm. On-site inspection is possible. Caedsvr Edyepfx Addsa