Used other metal presses for sale (147)

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm Fpsdpfjzbvm Isx Ap Den weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2018, condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Fpjdpfxeu Dal Hj Ap Don

Condition: used, Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible. Fpjdpjzvy Haofx Ap Dsn

Year of construction: 2005, condition: ready for operation (used), Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible. Fsdpfsxl Upnsx Ap Dspn

Year of construction: 1968, condition: used, functionality: fully functional, Type: Press Manufacturer: Smålandsstenars, Sweden Model: EPF-3 Year: 1968 Stroke: 6-70mm Pressing force: 250 kN (capacity approx. 25 ton) Stroke length 8x100 mm Stroke rate 65 x 130 strokes/min Air working pressure 0.6 MPa Fpedpfx Apjxgc Rio Den Weight 2000 kg Length 1.3 m Width 1.2 m Height 2.10 m

Year of construction: 1995, condition: ready for operation (used), A hydraulic two-column press brake Atlantik is available. Press force: 135t, bending length: 3000mm, throat depth: 250mm, ram stroke: 120mm, overrun time: 84ms, safety distance: 134mm, machine dimensions X/Y/Z: approx. 3500mm/1700mm/2300mm, weight: approx. 6800kg. An on-site inspection is possible. Fpedpfx Apjzk Nbpo Don

Year of construction: 1978, condition: ready for operation (used), Offered for sale is a Schuler C-frame eccentric press. Press force: 40t, throat depth: 220mm, stroke range: 8mm-88mm, max. stroke rate: 160strokes/min, table area X/Y: approx. 630mm/430mm. Machine weight: approx. 2300kg. Inspection by prior arrangement is possible. Fodpfxezrzpze Ap Djpn

Year of construction: 1978, condition: ready for operation (used), A Schuler C-frame eccentric press is offered. Press force: 80t, throat depth: 280mm, adjustable stroke range: 20mm-160mm, max. stroke rate: 125strokes/min, table area X/Y: 700mm/560mm, slide area X/Y: 560mm/350mm, slide adjustment: 72mm, max. distance between table and slide: 510mm. Machine weight: approx. 4800kg. Inspection possible by appointment. Fpsdjzrzpuopfx Ap Don

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] Fpedpfx Apsuhak Ue Djn - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 2290 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((ength-width-height) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Year of construction: 2007, condition: ready for operation (used), A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible. Fjdsx U Dwpjpfx Ap Dopn

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Additional information • Axis Travel: Pressing axis: 1 (vertical) • Maximum Pressure: 163 tons • Table / Bed Dimensions: Length 2000 mm / Width 1200 mm Fjdpfxsx D Rlij Ap Depn • Maximum Load Capacity: 5000 kg • Machine Weight: 6000 kg • Applications: Mold adjustment and testing, injection molding, die casting, rubber molding

Year of construction: 1999, condition: used, Technical Data Connection Data Power supply: 380 V Drive: three-phase motor, 0.75 kW, with electronic brake Processable cables Cross-section: up to 6 mm Motor speed: 1420 rpm, fixed Pressing force: 20 kN Stroke length: 40 mm Stroke time: 0.3 s Top dead center (TDC) infinitely adjustable Fpjdpfx Apoxcuqas Djn Variable bottom dead center (BDC)

Year of construction: 2007, condition: used, max. wheel diameter 500 mm workpiece height max. 200 mm dayligth 200 mm Control Simens Simatic MultiPanel weight of the machine ca. 7,3 t dimensions of the machine ca. 3900x1800x3300 mm Maximum workpiece outer diameter: 500 mm Maximum workpiece height: 200 mm Minimum workpiece inner diameter: 60 mm Fpodpfxsyan Nxo Ap Dsn Hold-down force of inner pressure ring: 120 kN Hold-down force of outer pressure ring: 240 kN Spreading force of the spreading mandrel: 60 kN Extrusion force: 800 kN Pump capacity for hardening oil flow, basic device: 750 l/min Hardening oil tank capacity of the hardening machine: approx. 2000 liters Hydraulic oil tank capacity: 400 liters Operating pressure, pneumatics: 6 bar

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Fpjdpfxjvyirke Ap Don

Year of construction: 2007, condition: used, max. wheel diameter 500 mm dayligth 200 mm workpiece height max. 200 mm Control Simens Simatic MultiPanel weight of the machine ca. 6 t dimensions of the machine ca. 4000x1700x3250 mm Maximum workpiece outer diameter: 500 mm Maximum workpiece height: 200 mm Minimum workpiece inner diameter: 60 mm Hold-down force of inner pressure ring: 120 kN Hold-down force of outer pressure ring: 240 kN Spreading force of the spreading mandrel: 60 kN Fodpfx Apsyan N Ss Depn Extrusion force: 800 kN Pump capacity for hardening oil flow, basic device: 750 l/min Hardening oil tank capacity of the hardening machine: approx. 2000 liters Hydraulic oil tank capacity: 400 liters Operating pressure, pneumatics: 6 bar

Condition: ready for operation (used), Parker 80 CE 082 Hose press Crimping machine with hose jaws Power: 1.5 kW Jaw sizes: 1/2" ; 3/8" ; 3/4" ; 1" ; 1/4" You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. Fpodpfx Aou Hidkep Dsn A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2002, condition: ready for operation (used), A CNC press brake Amada is available. Press force: 800kN, bending length: 2500mm, press beam length: 2570mm, distance between uprights: 2125mm, throat depth: 420mm, max. stroke: 350mm, installation height: 620mm, table width: 60mm, table height: 960mm. Machine dimensions X/Y/Z: approx. 3300mm/1600mm/2750mm, weight: approx. 6100kg, control system: Amada. Documentation available. An on-site inspection is possible. Fpjdszgwxnspfx Ap Dsn

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] Fpedsuhak Ijpfx Ap Dsn - Slide stopping time : 50 [ms] - Number of working hours : 606 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions (length-width-height) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 440 [h] - Lower extractor Fsdpfx Asuhakzop Dopn POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((length-width-height)) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Year of construction: 2006, condition: ready for operation (used), overall weight: 17,000 kg, total width: 2,450 mm, total height: 3,300 mm, pressing force: 306 t, product length (max.): 4,550 mm, number of axes: 3, Hydraulic press manufactured in 2006. This ERMAK CNC HAP 3100x300 features a pressing force of 300 tons and a bending length of 3100 mm. It is equipped with a high-precision Cybelec CNC control system and a robust steel frame construction, making it suitable for large and thick sheet metal bending. If you are looking to get high-quality bending capabilities, consider the ERMAK CNC HAP 3100x300 machine we have for sale. Contact us for further details. • Control system: Cybelec CNC • Drive system: Hydraulic • Main motor power: 22 kW • Working speed: approx. 80–100 mm/s • Rapid approach speed: approx. 100 mm/s • Key features: • Heavy-duty industrial CNC press brake • High-precision Cybelec CNC control system • Robust and rigid steel frame construction • Suitable for large and thick sheet metal bending • Ideal for industrial production and heavy steel fabrication Technical Specification Bending Length 3100 mm Fjdpfx Aozcbypjp Djpn

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Fpjdpfx Asyq R D Hop Djn

Year of construction: 1992, condition: ready for operation (used), Press force: 135t, bending length: 3000mm, nominal bending length: 2600mm, frame width: 2600mm, throat depth: 250mm, ram stroke: 120mm, working speed: 7mm/s, machine weight: approx. 6800kg. An on-site inspection is possible. Fpodpoy Hvrcefx Ap Den

Year of construction: 2005, condition: ready for operation (used), Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible. Fedpfx Apszbb R Ee Djpn

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Fedpfxslyr Ads Ap Dspn

Year of construction: 1992, condition: used, Technical details: voltage: 380 V/Hz sizes from - to: Ø 6 bis Ø 50 mm total power requirement: 1,5 kW weight of the machine approx.: 293 kg dimensions of machine: 690 x 380 x 1150 mm Application: Assembly of hose lines Process: pressure-controlled pressing with assembly tools Hydraulics 240 bar overpressure, capacity/capacity for 20 liters Electro-hydraulic drive Operation ON/OFF switch and foot control Machine is currently equipped with jaw set DN 12 16 (code 220) Further jaw inserts available: DN 6 - 10 (code 215) DN 20 - 25 (code 230) DN 32 (code 240) Fjdpfxjvc Atge Ap Depn DN 40 (code 245) DN 50 (code 260) without code: DN 21; DN 22; DN 33; DN 34; DN 35; DN 37; DN 39 *