Used Mandrel tube bending machines for sale (38)

Condition: used, Tube bending machine - Mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 K Series. No. 70173 Year of construction 2004 Bending capacity (steel) max. Ø 76.1 x 3.0 mm Bending capacity (stainless steel) max. Ø 76.1 x 1.65 mm Bending tool max. Ø 70 x 2 mm (for stainless steel) Tube slide-on length 4572 mm (4300 mm) Bending radius max. 150 mm Bending direction clockwise (right) Bending angle max. 190° Bending head speed at 90° 8 sec. Hydraulic operating pressure 200 bar Motor power 3 KW Dkehx Djr E Ht Ajvygol Mains connection 400 Volt, 50 Hz, 15 Amp. - Electro-hydraulic drive - Control panel with electronic control for 8 bending arms (IPU-8) - 360° twisting angle unit on precisely guided longitudinal sliding carriage up to 4300 mm extension length - Precisely guided longitudinal sliding carriage with adjustable stops - Hydraulic mandrel extension - Mandrel lubrication via hand pump in the operating area - Crease smoother - 10 tool sets with 10 mandrel bars 1x tool set Ø 18 - R27 1x tool set Ø 28 - R42.5 1x tool set Ø 29 - R50 1x tool set Ø 30 - R45 1x tool set Ø 33.7 - R51 1x tool set Ø 41 - R61.5 1x tool set Ø 40 - R60 1x tool set Ø 52 - R78 1x tool set Ø 53 - R80 1x tool set Ø 70 - R105 - Stainless steel mandrel tray, tightly welded with oil drain (length 5880 mm x width 450 mm) Space requirement of the machine L x W x H 5900 x 800 x 1600 mm Weight complete approx. 1.8 tons good condition

Year of construction: 1996, Condition: used, Hydraulic mandrel bending machine with lots of accessories Preselection of 8 different bending angles with digital display Digital length display and digital display of twist Max. usable length: 6096 mm Round steel tube (S 235): 60.0 x 6.0 mm Dshxeq Daxts Dvygekl Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg

Condition: used, Ring bending machine, profile bending machine, bending machine, pipe bending tool, tube bender, tube bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine Dkjhxsh S Ti Es Dvygjl -Accessories: see photos -Total dimensions: 1200/740/H1220 mm -Weight: 169 kg

Condition: used, Year of construction: 1997, tube diameter 60 mm wall strength 6 mm bending radius min. 180 ° total power requirement 5,5 kW weight of the machine ca. 1300 kg dimensions of the machine ca. 3500 x 1250 x 1300 mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Dehx Djt I D Uxovygekl Mandrel is no longer available, can be retrofitted

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 514, thorn length: 6,000 mm, bending radius: 200 mm, bending angle: 190 °, wall thickness: 5 mm, type of input current: three-phase, total width: 900 mm, total length: 8,000 mm, total height: 1,200 mm, overall weight: 2,000 kg, pipe diameter: 50 mm, input voltage: 400 V, pipe length: 6,000 mm, power: 7.5 kW (10.20 HP), Beautiful CNC tube bending machine. Hardly used in recent years. Will be delivered serviced. Large selection of bending tools. Dkohx Detuqfrjvygjl

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC Dkjhondn Agjx Dvygel - Service contracts, maintenance at your site

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. Dehx Dvod E A I Ieygekl The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 31,325 h, Functionality: fully functional, machine/vehicle number: 70836, bending radius: 180 mm, pipe diameter: 60 mm, TECHNICAL DETAILS Tube diameter: 20 - 60 mm Steel round tube: 60 x 6.0 mm Dshsun Rc Nex Dvygokl Stainless steel round tube: 60 x 4.0 mm Square steel tube: 50 x 50 x 4 mm Stainless steel square tube: 60 x 40 x 2 mm Bending angle: up to 180 MACHINE DETAILS Connected load: 37 kW Supply voltage: 400 V Mains frequency: 50 Hz Back-up fuse: 80 A Operating pressure: 200 bar Equipment: Pipe bending machine + control cabinet + cable

Condition: new, Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 40793, bending angle: 90 °, type of input current: AC, pipe diameter: 28 mm, Tube flanging machine, new and unused still in original packaging. Surplus to requirement suitable for flaring and flanging pipework to 28mm diameter. Complete with 18x1mm and 19 x 1.2mm flanging dies. cycle time is 4-10 seconds. Capable of processing tube diameter up to 2.5mm wall thickness. Dkehx Dotq Ai Djvygel

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm Dkshx Doivqrbevygsl bending angle 0 - 180 ° gas tube pipelines 2" (60.,3mm) mm speed stufenlos 0,5 - 2,0 total power requirement 1,5 kW weight of the machine ca. 0,7 t - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: refurbished (used), Year of construction: 2003, operating hours: 24,000 h, Functionality: limited functionality, bending radius: 300 mm, bending angle: 183 °, wall thickness: 8 mm, pipe diameter: 100 mm, pipe length: 4,100 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR Dkjhxjtrd T Te Dvygol 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Dkehx Dvong Exaeygel Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: ready for operation (used), Year of construction: 2012, operating hours: 31,325 h, Functionality: fully functional, machine/vehicle number: 70836, bending radius: 180 mm, pipe diameter: 60 mm, TECHNICAL DETAILS Tube diameter: 20 - 60 mm Steel round tube: 60 x 6.0 mm Stainless steel round tube: 60 x 4.0 mm Square steel tube: 50 x 50 x 4 mm Stainless steel square tube: 60 x 40 x 2 mm Bending angle: up to 180 MACHINE DETAILS Connected load: 37 kW Supply voltage: 400 V Mains frequency: 50 Hz Back-up fuse: 80 A Operating pressure: 200 bar Dkehx Djug Uzfjvygel Equipment: Pipe bending machine + control cabinet + cable