Used plasma cutting machines for sale (139)

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Bjdpfxjri Skaj Af Asdh

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 2, This KOIKE PNC 12 Extreme plasma cutting machine was manufactured in 2017. It features a complete plasma cutting system with a water tank and base frame, an oxyfuel torch tested only once, and includes software for nesting and programming. The Hypertherm Powermax 1250 power supply ensures reliable operation. Contact us for more information. • Plasma cutting system: PNC 12 Extreme • Complete with water tank and base frame • Control: KOIKE D420 • Axis travels: 3000x1500 • Low hours, around 250 production hours Additional equipment • 1x oxyfuel torch (only tested once) Bjdpfsx S Skfsx Af Aodh • Hypertherm Powermax 1250 plasma power supply • Software for nesting and programming • Consumable parts

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT Bdodey Sxvhjpfx Af Ajh with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 6,000 mm, controller manufacturer: ESAB, controller model: Vision 51, number of axes: 4, This 4-axis ESAB Combirex CXD P 3500 was manufactured in 1997. It features a cutting current of 100 A and is capable of handling a maximum recommended cutting thickness of 31.8 mm for mild steel and stainless steel, and 25.4 mm for aluminum. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex CXD P 3500 machine we have for sale. Contact us for further details. • Cutting table: 2,000 x 6,000 mm with sectional extraction • Track length: 8,000 mm • Track gauge: 3,500 mm • Three oxyfuel torches with capacitive height sensing • One torch carriage designed as an interchangeable system for plasma torch mounting • Supply voltage: 230 V • Apparant power: 4.0 kVA Bdodpfezc Rmfsx Af Ajh • Frequency: 50 Hz • Power source: Hypertherm Powermax 1650 • Torch type: T100M • Cutting current: 100 A • Torch-to-work distance: 3.2 mm • Maximum recommended cutting thickness (Mild Steel): 31.8 mm • Maximum recommended cutting thickness (Stainless Steel): 31.8 mm • Maximum recommended cutting thickness (Aluminium): 25.4 mm • Machine retrofitted in 2008: New Hypertherm Powermax 1650 plasma source (up to 25 mm steel) including torchNew Vision 51 control system • Conversion to dual-sided X-axis drive • Optional: Rotoclean RC-S80 extraction system • Automatic filter cleaning • Optional: various spare parts for oxyfuel and plasma operation availableOxyfuel cutting has not been used for a long time and may require maintenance

Condition: ready for operation (used), Year of construction: 2013, This MGM Omnicut 3100 was manufactured in 2013. A robust plasma cutting machine, it features a 12-meter table and a powerful Kjellberg HiFocus 360i plasma source. It efficiently handles mild steel up to 80 mm, stainless steel up to 80 mm, and aluminum up to 100 mm. If you are looking to get high-quality cutting capabilities, consider the MGM Omnicut 3100 machine we have for sale. Contact us for more information. Bdsdpox D Npasfx Af Ash Application Types Cutting

Condition: ready for operation (used), Year of construction: 2016, total height: 1,155 mm, controller manufacturer: SIEMENS, This SPIRO 6000V4 plasma cutting machine was manufactured in 2016. It features a large work table of 6000 x 1500 mm and can handle materials up to 6 mm thick, including steel and aluminum. Equipped with a SIEMENS controller and HYPERTHERM POWERMAX 1000 plasma source, it supports DXF file import/export. Ideal for medium to large industrial settings. Contact us for more information about this machine. Additional equipment • Plasma Source: HYPERTHERM POWERMAX 1000 Machine Benefits Technical Machine Benefits • Galvanized steel: 6 mm • Black steel: 6 mm • Cutting gas: air (dry and clean) • Cutting gas flow: 170 l/min • Cutting gas pressure: 6 bar • Exhaust system efficiency: 6000 m3/h Extra Information Bedpfxsx D D I Rs Af Aodh Machine still under power Dimensions Machine Depth 7000 mm

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) Bsdpfey E Nykjx Af Asdh ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: like new (used), Year of construction: 2025, operating hours: 32 h, functionality: fully functional, type of input current: three-phase, working range: 4,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 3,000 kg, total width: 2,700 mm, total length: 5,000 mm, workpiece weight (max.): 5,000 kg, Equipment: documentation/manual, Demonstration machine with large spare wear parts package for sale. Cutting table 4x2m and 300A XPR High Definition water-cooled Hypertherm power source. Core Plus mixed-gas console. True Hole function bolt guarantee —> Hole diameter equals material thickness (e.g. 20mm hole in 20mm plate). Top cutting results thanks to HD cutting technology. Very reliable and extremely user-friendly machine. Remote access and operation via office PC or smartphone possible, CAM software on board. Bedpfx Afjygczpe Asdh - only 26 cutting hours - Includes approx. €3,000 (net) worth of wear parts - Includes 3 quick-change heads, HD water-cooled, price per piece approx. €1,500 (net) - Piercing up to 50mm with Argon Assist - Cuts up to 80mm in mild steel - Includes comprehensive training at our premises - Dismantling and loading included - 4-year manufacturer’s warranty - New price: €135,000 (net) Freight and installation available as separate offer.

Condition: new, Year of construction: 2021, machine/vehicle number: XPR300-005397, type of input current: three-phase, overall weight: 680 kg, input voltage: 360 V, cutting current: 300 A, ambient temperature (max.): 40 °C, We offer this new Hypertherm XPR300 plasma cutting source, year of manufacture 2021. Only the plasma source is for sale. New, unused. 2 plasma sources available. Forklift on site. Manufacturer: Hypertherm Model: XPR300 Year of manufacture: 2021 Condition: new Category ID: 1448 Type ID: 2170 Type: plasma cutting machine If you have any questions or need further information, please send us a message or call us. Bedpfx Aoy Dqrfsf Aedh

Condition: ready for operation (used), Year of construction: 2008, operating hours: 22,560 h, overall weight: 196 kg, total width: 540 mm, total height: 1,050 mm, table length: 4,500 mm, table width: 2,000 mm, travel distance X-axis: 4,500 mm, controller manufacturer: MicroStep, controller model: MSNC500P Windows, laser power: 3,000 W, product length (max.): 960 mm, number of axes: 3, This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Cnc control: msnc500p windows Bedozwcddspfx Af Aodh • Plasma source cutting range: 0. 5 to 25/30mm (up to 50mm st-material separating cut) • Plasma source power: continuously adjustable from 10 to 160 a (cutting) and 4 to 25 a (marking) • Connected load: 38 kva • For plasma and oxyfuel cutting of sheet metal up to 100mm thickness • For plasma and oxyfuel cutting of sheet metal up to a material thickness of 100mm in a total length of 4500mm, section width 500mm, suction channel diameter 280mm • Overall dimensions: 6100x3384mm • Working temperature: +5 to +45 °c • Max. Humidity: 90% (at 20°c) • Power input: max. Kva 3 kw (230v, 50hz, 16a) Extra Information Machine still under power Dimensions Machine Depth 960 mm

Condition: used, cutting range for steel to 0,5 - 120 mm capacity at 100% 440 A mm cutting medium PerCut 451 dimensions ca. 1030 x 680 x 1450 mm weight ca. 600 kg water cooling unit KWE 360 control PGC Contour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the material Bedpjzginhofx Af Asdh The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm means considerably higher flexibility. The inverter technology allows the highest marking quality and functionality. The HiFocus 440i neo is ideally suited for steel service centers, steel producers and distributors because it can be combined with 2D or 3D CNC-controlled guiding systems like gas cutting machines, robots and pipe cutting machines. With HiFocus neo the user benefits, compared to competitors, from higher speeds when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to optimised technology, the consumables are handled gently and the plasma cutting process is more efficient

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Plasma Cutting System 6000x3000 mm – EPL 3060 ERMAKSAN 5 AXES – Hypertherm XPR300 with OPTIMIX – Bevel Unit YEAR OF MANUFACTURE: 2024 The machine was newly sold at the end of 2024 and is being offered for sale due to the company’s insolvency. The photos in the listing were taken during the commissioning phase; current photos will be provided at a later date. CNC Plasma Cutting System • Machine type: CNC plasma cutting table • Condition: Used – in good operating condition • Availability: Immediately available Bdodpfx Afsy Ipb Ts Ash Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and fast cutting of mild steel, stainless steel, and aluminum. Features • Bevel unit: BEVEL-R (5-axis bevel cutting system) for weld seam preparation and bevel cuts Extraction System • Sturdy, industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts

Condition: excellent (used), Year of construction: 2017, working range: 4,000 mm, overall weight: 6,500 kg, total width: 2,400 mm, total height: 2,600 mm, total length: 6,000 mm, Working area X Axis:4000mm Working area Y Axis:2000mm Working area Z axis:400mm Power resonator: 300kW / Amp Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Dust collector: Kemper Bedpfx Afey T Hyws Ajdh Length: 6000mm Width: 2400mm Height: 2600mm Weight: 6500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Technical data approx: - Gas transfer system for nitrogen , argon , forming gas , hydrogen Bdjdporf Uqzsfx Af Ash - from plasma cutting system + flame cutting system make ESAB - mounted on stainless steel plate as shown - div . pressure reducer + separator - Weight approx. 80 kg - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Bdedpfx Afozv N Hps Ash Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm MACHINE DETAILS Bjdpfozc Euqox Af Ajdh Operating hours Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Power source: Hypertherm Powermax 65 Pin marker TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: ready for operation (used), Dimensions: Bdodpfxsxfk Dzo Af Ash Width: 180 mm Depth: 460 mm Height: 280 mm Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. Bodpfx Ajyy Rn Sef Aedh * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Year of construction: 1980, condition: good (used), Equipment number: 2 002 Welding current at 100% duty cycle: 80 amps Connection: 18 kVA Cooling type: External cooling Features: Hose kit for connection; burner; mobile Dimensions: 1,000 x 700 x 1,000 mm Weight: 0.3 t Bdedpfx Afjhk El Te Ajh

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Bjdjyzhl Depfx Af Aodh

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS Bodpjx Ngn Tofx Af Asdh With the highly economical plasma process, material thicknesses of up to 25 mm can be cut with optimal precision. Automatic initial height sensing, automatic arc regulation, and intelligent collision protection ensure maximum quality and the highest repeat accuracy. The automated program sequence and the long service life of consumables actively help to significantly minimize cutting costs. The oxy-fuel cutting process also impresses with its straightforward handling and functionality. Thanks to the automatic piercing function, preheating times and the supply of cutting oxygen are controlled by CNC. This allows plates up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane gas and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on machined surfaces. The robust cutting grate features staggered, serrated support slats, providing optimal support for sheets and reducing slag formation on workpieces, as well as excessive wear on the slats, ultimately saving substantial costs on rework and maintenance. The tank depth is precisely designed to accommodate slag and support its cooling, is easy to clean, and effectively captures dust generated during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Material thickness Plasma: 1-25 mm Material thickness Oxy-fuel: 10-80 mm We look forward to hearing from you!

Condition: used, The HiFocus 280i is equipped with a manual gas console. Hoses and hose packages are not included. These can be offered as an option. The machine has a good 8,000 operating hours. Machine is available immediately Bjdpjum I Srjfx Af Aedh

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMPACT, The COMPACT model plasma cutting machine is a machine model that protects your budget through lower investment and reduced costs, prioritizing reliability, user-friendliness, and compactness as its three main principles. The Compact is a valid solution for the needs of a wide market segment, offering an excellent cost/benefit ratio for anyone dedicated to sheet metal processing. COMPACT is characterized by a monoblock design with a compact layout, making it easy to transport and suitable for medium and small workshops. This system is ideal for high-capacity plasma power sources. The system comes equipped with an extraction filter and plasma power source, and it can be configured with various CNC and software options depending on customer requirements. The Compact can feature a working range between 1,500mm x 3,000mm and 2,000mm x 6,000mm. Bdjdpfsyzm S Asx Af Ash

Condition: new, Year of construction: 2026, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet Bdodpfx Ajvxhwvjf Aeh DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2325 08 1323, sheet thickness (max.): 200 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 6,050 mm, No minimum price – guaranteed sale to the highest bidder! The machine's control system was renewed in 2021! Flexible gantry machine for plasma and oxy-fuel cutting TECHNICAL DETAILS Track gauge: 3,100 mm Working length: 6,050 mm Torch carriage Actual number of torch carriages: 1 Number of torch carriages: max. 2 Bdodjzm I Sljpfx Af Aeh Cutting performance Cutting thickness with standard torch: max. 200 mm MACHINE DETAILS Overall width: 4,610 mm Overall length: 8,000 mm Drives: AC servo motors with planetary gears Mains voltage: 3 × 400 V / 50 Hz Extraction and filter technology - CNC-controlled extraction tables - Cartridge filter systems with pneumatic cleaning Cutting test according to EN 1090 Test according to EN 1090-2:2018+A1:2024 Date of last test: March 7, 2025 Tested by the Belgian Institute of Welding (BIL) Tested material grades: S355 / S690 QL1 Execution class according to EN 1090-2: max. EXC 4 Cutting test report available on request EQUIPMENT - Lincoln Burny Phantom II software - High-performance servo motor MTI Motion’s Brushless T0851 - Cutting torch head with control and oxy-fuel torch IHT M4000 - Automatic height control