Condition: good (used), Year of construction: 1990, Netstal 1000/445HP Closing 100 TO Scrow 40mm Stroke volume 44x44 Dob Ensgi D Thsdkbjkl Year 1990

Condition: ready for operation (used), Year of construction: 2017, operating hours: 21,445 h, Control Unit Brand FANUC Injection Unit Screw diameter 32 mm Clamping Unit Clamping force 1250 KN Opening stroke 350 mm Size of mold platens 660 mm × 610 mm Additional Equipment Dkjb Endksvxbpxsbel Equipment: Robot Wittman W818 (2015) 8000 € extra This FANUC α-S100A was manufactured in 2017. It is an electrical injection moulding machine, ideal for precision plastic parts production. Consider the opportunity to buy this FANUC α-S100A electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2023, Zhafir VE1200III Clamping force: 1200 kN Opening stroke: 360 mm Minimum mold height: 150 mm Maximum mold height: 480 mm Daylight between platens: 840 mm Tie bar spacing: 470 x 470 mm Ejector stroke: 100 mm Clamping platen size: 690 x 690 mm Screw diameter: 36 mm L/D ratio: 20 mm/mm Shot volume: 147 ccm Dkjb Enjwbty Tedkbjl Shot weight (PS): 134 g Injection rate: 177 g/s Max. injection pressure: 2000 bar Total installed power: 18 kW Machine dimensions (L x W x H): 5.0 x 1.5 x 2.2 m Machine weight: 5400 kg

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 424 h, Functionality: fully functional, machine/vehicle number: 123-8419, overall weight: 48 kg, type of input current: three-phase, input voltage: 400 V, total height: 510 mm, total width: 180 mm, total length: 661 mm, Equipment: type plate available, HB-Therm HB-100Z1 series5 (2011.) Additional equipment: connection to external sensor - Digital connector (RS232) - Keyboard protection. 2 of this device type are available. Both are test devices! With few operating hours! Dkeb Endkov Svlzsbel

Condition: used, Functionality: unexamined, machine/vehicle number: 021290, A pallet with 7 temperature control units from Single Type: STW1-9-1D-TK5 Empty weight: 45 kg Motor power: 0.75 kW Heating power: 9 kW Pickup at our Haldensleben location. Loading/transportation is available as an option. Debswhx Rkj Endkbskl

Condition: used, Year of construction: 2021, machine/vehicle number: 27798, Order No. 25138 Double-column rotary positioner with lifting device Technical specifications: Debowigtis Endkbjkl - Maximum load capacity per column: 4000 kg - Total load capacity: max. 7000 kg - Travel / stroke: 1780 mm - Lifting speed: 1600 / 2800 mm/min - Electrically adjustable rotation - Right and left rotation - Drive: 400 V - Space required for driven unit: approx. W 1500 x H 4000 x D 1500 mm - Space required for travelling unit: W 1300 x H 4000 x D 1300 mm - Weight of driven unit: approx. 4000 kg - Weight of travelling unit: approx. 2500 kg

Condition: used, F5812BX, Moog, slip ring assembly Model: F5812BX Dsb Endksutb Tcsbjkl Condition: Used

Condition: excellent (used), Year of construction: 2003, Conveyor devices Djb Endkjmxkmxebjkl Cook Type 603 Year ca,2003

Condition: good (used), Year of construction: 2001, clamping force: 130 kN, Arburg 470 C 1300-350 (2001) Clamping force is 130 ton. Total weight is 5,1 ton. Djb Enouy Ncmedkbskl | ---|--- Screw diameter| 40 mm Tie bar spacing (H)| 470 mm Tie bar spacing (V)| 470 mm Shot volume| 182 cm³ Shot weight| 153 g Pressure on material| 2120 bar Platen length| 650 mm Platen width| 650 mm Robot interface| Number of cores| Number of heating zones| Opening of the press| 850 mm

Condition: good (used), Year of construction: 2007, operating hours: 55,000 h, 1x used Arburg 570C 2000-800 Golden Edition Year of construction: 09/2007 Ma-No. 206432 Auger: 50mm Blow-off valve: 2x Core pull: 1x Handling interface Host computer interface Djb Endswihmqskbokl Printer interface Interface for inking unit Connection for conveyor belt via 5-pin plug Connection for selection unit The machine is sold without any other visible peripherals / tools!

Condition: used, Functionality: fully functional, Various thermostat devices from Single 1) SKA-R-L (1) 2) STO 1-9-12-D1 (2) 3) STO 1-12-24-D2 (3) 4) STO 1-18-24-D2 (2) For more detailed information, see the type plates in the images. Dsbjwhx Aae Endkbekl The devices must be picked up from the Haldensleben location. Loading/transportation is available as an option.

Year of construction: 1987, Condition: ready for operation (used), A small Boy injection molding machine is available. Clamping force: 220kN, tie bar dimensions X/Y: 254mm/254mm, max. platen distance: 400mm, min. installation height: 200mm, opening stroke: 200mm, ejector stroke: 80mm. Screw diameter: 24mm, injection volume: 36cm³, injection weight: 32g, injection pressure: 1455bar. Machine dimensions X/Y/Z: 1800mm/1000mm/2600mm, weight: approx. 750kg, control: Dipronic. On-site inspection is possible. Dkobowhy S Aj Endkbsl

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Dkjb Eeq Nn Hcondkbol Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 1999, Condition: excellent (used), Dryer Mann+Hummel Pro Tec Debor Avfrj Endkbekl TF 70 Year of manufacture 2001

Condition: excellent (used), Year of construction: 2006, Arburg 470S 1300-350, year 2006 Injection Molding Machine, new hydromotor Clamping force 130 t Screw 35 mm Shot weight 127 g/PS Distance between colums 470x470 mm Effective screw length: 23 L/D Screw travel 145 max. mm Calculated stroke volume 139 max. cm3 Injection pressure 2500 max. bar Dkeb Endkovi Rzxebjl Injection flow 128 3/s Back pressure positive/negative 350/160 Screw circumferential speed 47 max. m/min Screw torque 560 max. Nm - Nozzle bearing force 55 max. kN - Nozzle lifting stroke 300 max. mm - B x H 650 x 650 mm - Weight 5500 kg, L x W x H: 550 cm x 150 cm x 235 cm - in production untill 05/2024 Condition: fully funtional - Video available on request. 3x hydraulic core pull - system is in Czech language Machine has brand new hydromotor!

Condition: excellent (used), Year of construction: 2017, 1x used Arburg 1500T 1600-170 Ma-No. 241988 Year of manufacture: 08/2017 Complete thermoplastic cylinder, 30 mm, highly wear-resistant Standard screw coupling, two-edge coupling geometry Selogica direct control system Technology level 2, servo-driven with 2 control pumps Special model rotary table, ergonomic design Thermoplastic processing 2-station rotary table, 180° forward/backward alternating Open nozzle, 30 mm Nozzle tip radius 35 mm Heating band for open nozzle Central clamping platen set, Ø 125 mm Blow-out device 1 with pressure reducer at station 1 Connection for blow-out device 2 at station 2 Connection for tool position monitoring on the movable mold platen Connection for tool position monitoring on the rotary table Core pull 3, simultaneous travel movement P/Q controlled, programmable Core pull 4, simultaneous travel movement P/Q controlled, programmable Core pull 1+2, on the rotary table P/Q controlled, programmable Light curtain at 180° Continuous oil cooling and filtration Connection for oil bypass filtration Extension pipe for granulate container Injection compression molding and venting with clamping unit Interface to host computer OPC-UA 8 programmable inputs/outputs Djb Enewihmkjdkbskl Socket combination 1CEE, 1 Schuko, protected by a 30mA Type B residual current device Socket combination 3CEE, 3 Schuko, protected by a 30mA Type B residual current device Interface WKZ 20 mA temperature control unit HB-THERM temperature control unit connection cable Printer serial USB interface CompactFlash interface for data storage Operator authorization with chip card according to EUROMAP 65 9 electrical heating control circuits for tool heating Inking device interface Lighting in the loading area 7 free cooling circuits, manually adjustable 2 cooling circuits on a moving plate for water, max. 60°C 2 cooling circuits on a turntable for water, max. 60°C 2 temperature control circuits on a moving plate for water, max. 140°C 4 temperature control circuits on a Water rotary table, max. 140°C Machine-specific cooling circuits controlled Extended monitoring package Extended travel motion package Production control package Optimization/operating aids package Quality assurance package Documentation package Axis monitoring package aXw Control ScrewPilot for 1st injection unit 8-way rotary union, top-mounted Corrosion protection treatment for rotary table Circumferential sealing lip on the outside

Condition: used, Year of construction: 2013, GRANULATOR, KNIVES MILL CMG S3050A rotor diameter: 305mm rotor length: 500mm Dob Enjway Sajdkbskl main engine: 9kW complete with blower and big bag station

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 00020, Type: Transfer device R3 Equipment / Additional information: Dsb Eoupi Aqendkbokl Air pressure: min 6 bar

Condition: excellent (used), Year of construction: 2003, Engel ES1050/200 HL (2003) Clamping force: 200 t Dksb Eov Akpvendkbel Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 1999, Clamping force: 200 t Screw diameter: 45 mm Distance between tie bars V: 520 mm Distance between tie bars H: 820 mm Shot volume: 318 cm3 Type: Horizontal Dob Ejvzyn Ssndkbjkl Drive: Hydraulic complete machine datasheet on request

Condition: excellent (used), Year of construction: 2013, Clamping force: 190 t Dsb Endkevx Utkebjkl Screw diameter: 50 mm Shot weight: 358 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Min mould dimensions: 370x370 mm Mould platens: 840x840 mm Shot volume: 394 cm3 Type: Horizontal Drive: Electric

Condition: like new (used), Year of construction: 2018, Basic Technical Specifications: • Type: Vertical injection molding machine • Clamping force: 1600 kN (160 t) • Screw diameter: 30 mm • Shot volume: 113 cm³ • Drive system: Hydraulic • Table diameter: approx. 1600 mm • Year of manufacture: 2018 • Operating hours: approx. 18,167 hrs Performance and Capacities: • Hydraulic system capacity: 250 l • Dosing stroke: 160 mm • Screw torque: 380 Nm • Injection flow rate: 111 cm³/s • Specific injection pressure: 2180 bar (increased: 2390 bar) • Nozzle stroke: 650 mm • Nozzle contact force: 48.9 kN Clamping System: • Opening stroke: 450 mm • Minimum mold height: 300 mm • Maximum plate distance: 750 mm • Clamping plate dimensions: 1330 x 500 mm • Maximum total tool weight: 2600 kg • Ejector stroke: 105 mm • Ejector force: 35 kN Djb Esu Ekltendkbskl Tool Weight Capacities: • On moving clamping plate: max. 1100 kg • On stationary plate: max. 1500 kg

Year of construction: 2020, Condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- Dksb Eeqvuicendkbel 37 cm height-47cm length-8cm

Condition: excellent (used), Year of construction: 2007, Clamping force: 80 t Screw diameter: 28 mm Injection volume: 86 cm3 Tie bar distance: 360x360mm Dob Ejvclwnondkbskl Platen size: 570x570 mm Mould min-max: 140-350mm Working hours: 43 000 h

Year of construction: 2019, Condition: excellent (used), \- functional, worked until 08/2022, therefore selling - 90°C, cooling capacity 64 kW/ heating capacity 24 kW - THW124-F, 180 l/min.; 3,5 bar - 120 kg weight Dksbouykn De Endkbol