Used sawing and cutting for sale (147)

Condition: used, Costa multi-blade saw Csdjvw Rplspfx Aa Nerb -Type Lince -max. cutting height 140mm -motor 30kW

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm -max. passage width 1000mm Codpfxsvw Rnbo Aa Norb -multi-blade saw with fixed saw attachment

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Cutting height 160 mm Chain bed approx. 420 mm With spikes in the chain bed Including slat bush and spacer rings Main engine 75kW Crodpfjucnudjx Aa Njb

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Codoucnt Hjpfx Aa Norb Roller diameter 1100mm With swivel table for diagonal cut disassembled from our warehouse in 23936 Grevesmühlen

Condition: used, functionality: fully functional, The primary breakdown section of the saw line is available for sale. The package includes a Heinola (Ahlström) chipper canter and a quad band saw (BM1500), together with centering, infeed, and outfeed conveyors. The equipment is offered as a complete, fully operational solution. Cjdpfx Aeyka Nrea Njrb

Condition: used, Year of construction: 1980, functionality: fully functional, Canali Band Saw TB 1100 Manufacturer: Canali Germany Year of manufacture: 1980 Band Saw with center cut centering Roll diameter: 1100 mm Max. saw blade width: 100 mm Roll width: 90 mm Max. saw blade length: 6800 mm Min. saw blade width: 6500 mm Main motor: 22 kW Infeed device tilt adjustment: 0-45 ° Feed speed: 0-30 m/min Feed chain height: 300 mm For center cut, clearance width: 300 mm To the left of the saw blade: 150 mm Saw blade tension: manual 400 V / 50 Hz Weight: 3500 kg Technical specifications subject to change Credpjv Ny S Tsfx Aa Nob

Condition: good (used), Year of construction: 1980, functionality: fully functional, Automatic edger line Söderhamn (Kockums) Edger 511-A Built approximately 1975-1980, or 2000 With complete 6.2 m x 1.5 m infeed conveyor with automatic centering and motorized feed. Board width continuously adjustable. Feed speed 77-118 m/min Minimum edger width 75 mm Maximum edger width 350 mm Maximum wood thickness 125 mm Fixed saw blade 6 feed grooves Saw spindle speed 1800 rpm Maximum saw blade diameter 650 mm Weight with motor and control station 2050 kg Codpfx Aaouq N Agj Njrb

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. Credpfervh Tmjx Aa Nsb We can also offer full electrical installation and assembly of line on site.

Condition: refurbished (used), Trimming recutting machine MEM Cobra Cutting height 120 mm Diameter 1070 mm 4 axes variable Crsdpfxou Ni Iuo Aa Neb 2 x 55 KW Refurbished machine. Optionally we can offer new sprinkle separator as in photo.

Year of construction: 2000, condition: excellent (used), According to customer order for sale: - Complete trimming system EWD Combimes with Sage Model DK 90 TL - Produced in 2000. - With sorting roller conveyor, 6 removal points. Crsdjvt Rlxepfx Aa Nob System already dismantled. Very good condition.

Year of construction: 1990, condition: used, functionality: fully functional, A fully functional used Heinola chipper canter with a cant centering conveyor is available for sale. Crsdpfxsyikvwo Aa Njb The chipper canter is equipped with two 132 kW electric motors. The brochure is attached to the listing.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Csdsw S Eyljpfx Aa Nerb

Condition: refurbished (used), AKE Log bandsaw groups with or without chipper canter unit We can offer different constellations of AKE Log bandsaw type 245 as below: A. Bandsaw groups with 2 , 3 or 4 bands B. Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. Crsdpfxjiv Stie Aa Neb C. Complete sawline ( type SuperSaver ) Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. Plus board edger unit. Capacity up 35000 m3 of ready sawn wood per year and single shift

Year of construction: 1990, condition: refurbished (used), functionality: fully functional, A fully functional used Heinola chipper canter with a log centering conveyor is available for sale. Crjdpsyg Ruksfx Aa Njb The chipper canter is equipped with two 132 kW electric motors. The brochure is attached to the listing.

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Csdpfeyl Afrex Aa Njrb Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Year of construction: 1992, condition: good (used), Machining for cut-off band saw in concentricity Codpsfd Ibvsfx Aa Norb

Year of construction: 1990, condition: excellent (used), A KT-53 Board Edger that is rebuilt to a KT-52 Codpohuiwuefx Aa Nsrb

Year of construction: 1984, condition: excellent (used), An Edging Saw in very good condition Codpfxjhuiwxs Aa Nsrb

Condition: used, HewSaw R200 Codpfenabxaox Aa Nerb

Year of construction: 1982, condition: good (used), pre-cutting saw Esterer KSG-F year 1982 travelling with swords with control Cjdpfxoip T Dle Aa Nsrb with length measuring with frame with hydraulics immediately available Location: Austria, near Vienna

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Crsdpfx Aeyhduyja Neb Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Year of construction: 2005, condition: used, functionality: fully functional, – Polish production – DTR – Used machine, very good condition TECHNICAL PARAMETERS: – max. processed log diameter: 320 mm – minimum processed log length: 1600 mm – number of spindles: 2 pcs – spindle diameter: 70 mm – spindle working length: 230 mm Crsdpfxswu U Ifj Aa Nsb – saw blade diameter: 450 mm – main motor power: 75 kW – feed motor power: 2 x 2.2 kW – upper feed rollers motor power: 1.1 kW – side discharge feed rollers motor power: 2 x 1.1 kW – 2 geared feed rollers – infeed table length: 2100 mm – outfeed table length: 2600 mm – machine dimensions (L/W/H): 600 x 200 x 185 cm – weight: ~3800 kg

Condition: used, functionality: fully functional, - Polish production - DTR (Technical Documentation / Operation Manual) - Maximum length of processed material: 2800 mm TECHNICAL PARAMETERS: - Minimum length of cut prism: 600 mm - Maximum thickness of cut prism: 110 mm - Maximum width of input material: 450 mm - Maximum width of finished board: 150 mm - Minimum width of finished board: 70 mm - Saw blade diameter: 400 mm - Output capacity up to: 20 m³ - Power of right vertical spindle motor: 3.5 kW - Power of left vertical spindle motor: 3.5 kW - Rotational speed of vertical saw drive motors: 2850 rpm - Power of horizontal saw motor: 22 kW - Rotational speed of horizontal saw drive motor: 2850 rpm - Rotational speed of feed drive motor: 1450 rpm Crodpfx Aajq Rc Rlo Nsb - Feed speed (stepless adjustment): 0 - 20 m/min - Supply voltage (50 Hz): 3×400 V - Machine dimensions (L/W/H): 7250 / 1700 / 1600 mm - Transport dimensions (L/W/H): 4700 / 2400 / 1600 mm - Machine weight: 1300 kg

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: Crsdpfx Asxdxv Noa Nob - Maximum cutting length: 6050 mm - Minimum cutting length: 585 mm - Cutting height: 120 mm - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 - Cutting unit power: 4x 3 kW - Feed motor power: 1.1 kW - Material feed via chains - Feed speed adjustable with gear motor

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Codev I D Shepfx Aa Njrb Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table