Condition: good (used), Wurster & Dietz QSW10 cross-cut saw for sideboards/boards Bwjb Ejv I Ahhoxyzljl Built in 1994 Fully functional - available immediately Location: Austria, near Villach

Year of construction: 1992, Condition: good (used), Machining for cut-off band saw in concentricity Bwob Exefd Ibveyzlel

Condition: new, Year of construction: 2025, HIGH-PERFORMANCE WRAVOR BANDSAW, SPECIALLY DESIGNED FOR PRECISE AND EFFICIENT CUTTING OF LAMINATED BEAMS. IT ENSURES HIGH-QUALITY CUTS, MINIMAL MATERIAL LOSS, AND OPTIMAL PRODUCTIVITY. 📌 Key features: ✔ Precise cutting of laminated beams ✔ Automatic control for increased efficiency ✔ Robust and reliable construction Beb Eevu Um Njxyzlewl

Condition: used, Year of construction: 1976, consisting of 1 cross-feed transport with 5 chain strands, 8.0 m long with 2 separate drives, 4.0 kW each, for wood lengths from 2.5 to 12.0 m, 1 rising cross-feed transport with log transfer, 3.0 m long, 5 chain strands, 1 block hoist with 2 chains and carriers, 16.0 m long, drive 1.1 to 5.5 kW, feed 10 - 60 m/min., 1 cutting station with chain saw, 11.0 kW, with hydraulic clamping arms, 1 tapered roller conveyor for transporting the cut pieces and built-in ejectors for transfer to the sorting block hoist, 12.0 m long, 1.0 m wide, feed 10 - 60 m/min, 05, to 3.0 kW, 1 sorting block hoist, 68.0 m long, but without boxes, 5.5 kW, feed 50 m/min., 1 wide scraper chain conveyor for removing the sawdust and the trimmings, approx. 4.0 m long and 1.30 m wide. The system is still electrically connected and can be demonstrated. The analog control system would need to be replaced, the sorting block train could Bwob Exyzsrr T T Ujlsl be retrofitted with ejectors for boxes,

Condition: used, Screen for wood chips Suitable for producing cellulose chips. Screen area 5.25 m2 Bob Ejv Ipc Ssxyzlewl Capacity approx: 100 m3 ready chips per hour

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Included in the offer: Bjb Eev Rluvexyzlswl A log band saw with a tensioning carriage and conveyor mechanisms, a trimming saw, a four-side planer, a sideloader, a drying chamber, and a sorting carriage. Important: The price and scope of the offer can be requested by phone. Log band saw: Brand: Bongioanni Type: SNT 1300 Canadian Technical specifications: Main motor power: 75 / 110 kW (75 continuous, 110 short-term) Flywheel diameter: 1300 mm Belt flywheel: 195 mm Distance between column and sawblade: 680 mm Max. cutting height: 1000/1200 mm Sawblade speed: 42 m/sec. Sawblade dimensions: 206 x 1.3 / 1.45 x 8750 / 9250 mm Edging saw: Brand: Paul Type: KME 2 Max. cutting height: 120 mm Power: 18.5 kW (25 HP) Four-sided planer: Brand: Pinheiro Type: MF4EEX - 630 Year of manufacture: 1989 Power: 36.07 kW Side loader: Brand: Battioni & Pagani With extendable tines Drying chamber: Brand: Mühlböck Sorting cart

Condition: good (used), Fully hydraulic tensioning car Weiss Hdt Bwsb Exyzsv I Agkoljl with auxiliary car with tracks Track width: 90 cm Fully functional - available immediately Location: Austria, near Villach

Condition: excellent (used), Year of construction: 2020, operating hours: 5,200 h, Functionality: fully functional, type of motor: electric motor, This beautiful complete machine is well equipped with the following: 4 alignment clamps 5 stainless steel supports 3 loading arms (adjustable) 3 unrollers 2 hydraulically driven rollers 1 turner 1 turning assistant 2 receivers 1 sawdust container 1 pre-cutter Technical data Basic saw length: 9m Diameter trunk: 130 cm (51.18 inch) Ø Cutting width: 100 mm (3.94 inch) Hydraulic pump: 21 l (5.55 gal) engine power: 22 kW Standard saw blade width: variable, 5,530 mm – 6,020 mm (18.14 ft – 19.75 ft) Saw blade length: Bwjb Exjvvia Hjyzlol variable, 5,530 mm – 6,020 mm (18.14 ft – 19.75 ft) Price is including (DRAIN TABLE !!)

Condition: excellent (used), cutting width (max.): 700 mm, cutting height (max.): 120 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Bebev Raqxe Exyzlswl Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Year of construction: 1970, Condition: good (used), Functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK Bjbevuhume Exyzlewl S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: refurbished (used), W2600/ L5800 / H- 2250 Bweb Exysv Aygdjzlol

Condition: ready for operation (used), Functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Beb Exjv I D Shjyzlewl Main product on the feed roller table

Condition: good (used), 4-strand log infeed/log feeder with separator with feeder with log turner with alignment tapered roller conveyor Total conveyor length: approx. 10.5 meters Width: approx. 4 meters for log lengths of 3-12 meters Bwsb Esv I Aftoxyzlel Fully functional - available immediately Location: Austria, near Villach

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Bweb Exyzsikvliolol Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: like new (used), Year of construction: 2009, Functionality: fully functional, Felling machine Walter WDPP-410 edger - Polish production - DTR, CE TECHNICAL PARAMETERS: min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. width of the input material 500 mm max. width of finished board 140 mm min. width of finished board 70 mm diameter of circular saw 425 mm Bjb Exysq Rc Rlszlewl capacity 20 m3 power of vertical right spindle engine 5.5 kW engine power of vertical left spindle 5.5 kW engine speed (vertical saws drive) 2850 rpm engine power of horizontal saw 18 kW motor speed (horizontal saw drive) 2850 rpm feed motor speed 1450 rpm feed speed (smooth adjustment) 0/20 m/min supply voltage (50 Hz) 3×400 V overall dimensions of the machine (length / width / height) 6900 / 1400 / 1380 mm weight of machine tool 1300 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 1025, arm reach: 13,300 mm, load capacity: 2,300 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 1989 (factory overhaul 2007) Machine number: 1025 Track, m: 3.0 Crane type: OBX IV (year of manufacture 2007) Reach: 13.3 m Load capacity without grab: 2,300 kg / 13.0 m Grapple: included Crane arrangement: behind the cabin Cab side: left Saw: 1.3 m Alpha Measurement: dividing aid with 2-level measurement Year of manufacture 2007 !! Sold on behalf of the customer!! Available from April 2025 Bweb Exyov Ddtkjzljl

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Model Woody 500-100-1.0 SP Produced in 2019. Bsb Exyevrd Uqezlswl Like new.

Condition: ready for operation (used), Year of construction: 1972, Functionality: fully functional, Braun frame saw type CH6B-70, built in 1972 Swinging frame without width adjustment with splitting wedge Saw clamp with hydraulic side pressure, built in 1989 Bwjb Exyzsv I D Ezjljl Round log cross conveyor, 4 strands, approx. 7 m long, built in 1980 Round log separator, 5 strands, approx. 1.40 m long, built in 1980 Mayerhofer clamping carriage type VH with auxiliary carriage, built in 2002 Driven frame roller conveyor, 4 m long, 1.60 m wide, built in 1980 Driven frame roller conveyor, 1.60 m wide, approx. 15 m long with integrated ejector with 5 strands Cross conveyor, 5 strands, approx. 6 m long for sideboards, built in 1980 Sharpening room equipment From: Vollmer CABG gang saw sharpening machine, built in 1991 Meinert PH4D gang saw setting machine, built in 1967 Vollmer AT gang saw setting machine

Year of construction: 1988, Condition: good (used), RIVO / Risstaler setting machine fully automatic setting machine Type: GSA Year of manufacture 1988 Blade width: 80-160 mm Bwob Exev In Nqjyzlel Blade length: max. 150 cm Blade thickness: 1.5 - 2.5 mm Tooth pitch: max. 25 mm Setting width: 0.6 - 1 mm Weight: 290 kg Location: Austria, near Linz

Year of construction: 1994, Condition: good (used), - quantity of knives 4 - lenght of knives 720 mm Bsb Exyzjuxuqgolewl - diameter of drum 900 mm

Condition: used, Costa multi-blade saw -Type Lince Bwob Eevw Rplexyzlel -max. cutting height 140mm -motor 30kW

Condition: new, Year of construction: 2025, Stepfeeder MUL SF 3 For log diameter 10 - 50 cm Available in 2, 3, 4 or 5 sections Width starting from 1800 mm Height - minimum 1500 mm Heavy and solid constructed Hydraulic movement. Max 20 strokes per minute. Bwobjv Ak Ifj Exyzlol Fully automatic loading system with sensors and controller

Year of construction: 1998, Condition: reconditioned (used), Round log rotor debarker with infeed VK600, MAX LOG DIAM 81 cm warranty time 6 month from delivery, delivery time 2 month from order Bweb Exyepbbmlezlel

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm -max. passage width 1000mm Bwsb Exyzjvw Rnbjlsl -multi-blade saw with fixed saw attachment

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Electric drive logs stepfeeder, 4 steps, electric panels Bwobsv A Iv Ho Exyzljl