Used thermoforming machinery for sale (52)

Year of construction: 2001, condition: ready for operation (used), HEK GmbH VGO 200 S Heating cabinet Dimensions (approx.): Width: 1035 mm Depth: 800 mm + 210 mm tube Height: 820 Njdpfx Aeg Hzqbja Dewb

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 00020, Type: Transfer device R3 Nwjdsupi Aqepfx Aa Dsb Equipment / Additional information: Air pressure: min 6 bar The maximum size of the stacking basket is 530x300mm.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Nwodpfx Aaehbu E He Dsb Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge Nwodpfx Aon D Ew Ija Dob

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Nodpsx Uym Hofx Aa Dowb Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Condition: excellent (used), Mobile plasticiser for press processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulics PN: 150 bar Pn: 16,5 kW P heating: 8 kW 400 V Nwjdpeg H I Nxsfx Aa Dsb Single STW 150/1-3-10-K  Temperature control unit  3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Profile bending machine model 17-PB-00 by FUX, Austria, in excellent condition. Dry processing (no oil), with hot-air heating, suitable for circular and arched PVC profiles for windows, doors and façade elements. The machine consists of three working stations as shown in the photos, forming a complete line for bending PVC profiles into circular and arched shapes. Application: bending of circular/arched PVC profiles Process: dry processing with hot air (no oil required) Three integrated working stations for profile heating, forming and handling In very good working order, ready for use in production Transport / shipping: Transport costs are borne by the buyer. Shipment will be arranged after consultation, in order to agree on the most suitable means of transport and method of dispatch. Nwjdjx Dq T Hopfx Aa Djb For further technical details, photographs or to arrange an inspection, please contact us by email.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Manufacturer Kiefel Model KMD 60B Year 2012 Condition Used Stock Number 00034 Approx hours 26000 Delivery date Immediately Stations Three Max tool dimensions TBC Nsdpex Ekcasfx Aa Dewb Maximum Mould Surface 580 x 440 mm Minimum Mould Surface 260 x 250 mm Depth of draw 120 mm +/- Max film width 630 mm Max dry cycles / min 70 Operating pressure 6 bar Approx Dimensions TBC Approx Weight 10,000 kg Notes All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Year of construction: 2023, functionality: limited functionality, Manufacturer: Breyer Extrusion Item: Die, 3 layer die 2300mm 3-layer flat sheet die, 2,300 mm width (die opening) Deckling device for one die (max. 500 mm) Feed-block / distribution block Year of manufacture: 2023 Original purchase price at the time: €365,500 Total price at the time: €444,200 Key technical data of the die: - Total throughput: approx. 700 kg/h - Designed for HDPE material - Gross discharge width: 2,300 mm, adjustable via deckling - Lip opening: 16 – max. 26 mm - Heating: Electric via heating cartridges 400V / 50Hz - Die heating capacity: 137 kW - Co-extrusion adapter heating capacity: 7.5 kW Comprising: - Die (main die body) 3 channels - Co-extrusion adapter - Die body - Die lip body - Attachments / screws - Attachments for deckling and co-ex adapter parts - Attachments for adjustment mechanisms (Note: Photos are from 2023) The die now shows signs of use and is stored disassembled. The heating elements are included but not installed. Nedpfx Aox A D Emoa Djwb The die is located in 78224 Singen (Hohentwiel) at the manufacturer’s premises. An inspection on site is possible by prior appointment. Further photos available on request. You are welcome to submit a price proposal. Reasonable offers will be considered. Please provide complete contact details with your enquiry! Delivery may be available for a fee. You are also welcome to inspect the item on site. Please call to arrange an appointment. A quick tip: Become a “FOLLOWER” of ours here on Kleinanzeigen to stay up to date with our latest listings and offers. This item comes from insolvency proceedings and thus shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. Sale is without any warranty. Liability, reduction or rescission is expressly excluded. An inspection prior to purchase is recommended, as it is sold as seen. All information is provided without guarantee. Errors and changes excepted. The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of liability for visible and hidden defects, especially technical quality, performance, or usability issues. Due to time constraints, we will only respond to serious enquiries and price offers! This is an advertisement for informational purposes only. Inspection strictly by appointment only! Best regards, Leipziger Sicherstellungs- und Verwertungs GmbH R. Raum, Tel. 0152 31381635

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Tempering furnace for stress relieving and forming acrylic glass The furnace has two doors on one side and 2 narrow doors with rail system on the back. The sheets are hung there and pneumatically clamped with foot switch and released again. - The oven has a maximum temperature of 230°C and a permanent deviation around the set temperature of +/-3°C at 75°C . Nedpjb Nzycofx Aa Dswb - The internal dimensions are approx. width 1600 x depth 2000 mm. The height of the oven in the rail system can accommodate a 1800mm high free-hanging panel. - You can see the rail system on the attached pictures. The rail system can also be mounted on the front side. It can accommodate panel thicknesses from 1.5 to 25mm and can support a maximum panel weight of 150kg. - The power can be adjusted in several steps. - Air circulation approx. 3.000 m³/h - doors can also be opened from the inside for safety reasons - Safety device which also switches off the heating in case of fan failure.

Condition: good (used), Year of construction: 1991, functionality: fully functional, Oven for plastic processing Njdpfxowp Em Us Aa Dowb The oven can process thermo-plastics. Manufacturer: Reinhardt Model : VL Year of manufacture : 1991 No. : 8182 Connected load 50.2 kW Voltage 380 Volt Operating temperature 50 - 200 °C Carriage approx.: 2000 x 1200 mm W x D x 500 mm opening

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. Nwjdpforh E Ibjx Aa Djb The machine is still in production mode, but is available immediately.

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1506, film width: 1,000 mm, type of input current: three-phase, pressure: 6 bar, total width: 700 mm, total length: 1,000 mm, total height: 350 mm, input voltage: 400 V, sheet thickness (max.): 10 mm, heating capacity: 30 kW (40.79 HP), overall weight: 1,500 kg, tool height: 490 mm, Machine type: ILLIG UA 100 G Machine number: 1506 Manufacturing year: 1988 Total weight: approx. 1,5 tonns Power supply: 3x400V Total power consumption: 35 kWh Total (lower and top) heating: 30 kWh Type of the heating plate: ceramic Sheet size max.: 1000x700 mm Sheet size min.: 310x210 mm Sheet thikness max.(manual loading): 12 mm Forming area max: 960x660 mm Forming area min: 270x170 mm Nwodewfdd Djpfx Aa Djb Height of formed part positive: 350 mm Height of formed part negative: 350 mm Max. tool height: 490 mm Around 2020, the machine underwent a refurbishment. It received a new Omron control system to replace the original Schleicher, and we also refurbished the cabling and electrical cabinet.

Condition: as good as new (ex-display), machine/vehicle number: 1966190, Heating table HT3110 For tempering thermoplastic materials such as mineral plastics, acrylics, etc. to the required processing temperatures. Nedpfj T Sv Sjx Aa Dewb Torsion-resistant base frame consisting of welded steel profiles. Movable on four rollers. Upper folding frame at the rear side rotatably mounted in a solid spherical bearing. Two aluminium heating plates black anodized maximum operating temperature 180 C. Temperature control by means of electronic controller in separate switch cabinet in the base of the table. The swivel movement is actuated by pneumatic cylinders located on the side. Four adjusting screws on the side for setting the material thickness.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: F.24442.03.03, Unique opportunity for serial manufacturers We are offering you here an immediately available, top thermoforming linear system with automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hotmelt extraction, heating enclosure, and many other special functions directly from the manufacturer FRIMO. The system was most recently used for the production of automotive door panels. Nwsdpfxowpd Rro Aa Deb The film itself was coated with hotmelt. The system can also be used for dispersion adhesives (adhesive on the carrier parts). Very large components are possible, forming area up to 800 x 2,000 mm. The maximum forming part height is 250 mm. Very fast cycle times of under 60 seconds are easily possible. The system was regularly maintained and was in operation up to its dismantling. Currently, the system is properly stored at our facility in Hungary. We have locations worldwide and can assist you directly at your site. We can deliver this system worldwide as needed, install it at your factory, train your personnel, and advise you in all technical matters. Any modifications and modernization are also possible. Just ask us with your individual project request!

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Nwedpjxn T Nrofx Aa Deb Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Year of construction: 2004, condition: ready for operation (used), Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018. Nedpfx Aajl Ax Tve Dswb

Condition: excellent (used), Year of construction: 2005, Basic data: Nwodpfx Aajrfn Rvj Dsb Production year: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000kg Operating voltage: 400/415V 50Hz Power consumption: 20kW Capacity at 20g/l: 1600kg/h Touch screen control panel Powder tank with screw feeder Complete documentation in both paper and electronic form (electrical schematics, CE compliance certificate, user manual) Condition: very good (machine clean and well-maintained, used exclusively for foaming white polystyrene) For an additional fee, our company can arrange transportation, as well as the installation and commissioning of the machine by our technicians at the location specified by the customer.

Condition: used, We are selling a well-maintained generator from Kiefel. The generator and tubes have few operating hours. The rotary table shown in image 1 is no longer available. Nsdpfx Aaew Hdzls Dewb

Condition: refurbished (used), Year of construction: 2017, Was overhauled in 2017, with documentation. Nwodowqd Adopfx Aa Djb

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 Nodpotv Ivzsfx Aa Dswb maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Nwodpfxst Iracs Aa Dsb Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Condition: good (used), Year of construction: 2001, Greiner Thermorunner 4 for polypropylene (PP) and polystyrene (PS). Including heating station, forming station and cooling system. * Punching force: 180000N * Production speed: max. 45 cycl/min * Sheet width min: 150 mm Nodpfx Aen Utzfoa Dewb * Sheet width max: 560 mm * Sheet thickness min: 0.3 mm * Sheet thickness max: 2.5 mm This Thermoforming Line is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: ready for operation (used), Spare parts package for Kiefel KMD 85 consists of electronics, gears and motors see photos. Nwodjq Evmcopfx Aa Dsb Chain transport is not included in the pictures.

Condition: excellent (used), Year of construction: 2014, operating hours: 19,000 h, functionality: fully functional, Gabler M92L thermoforming machine, in excellent running condition. Nwodpfx Aowcdvnoa Deb