Used turning automatic lathes for sale (183)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: E 3907, turning length: 200 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,300 kg, type of input current: three-phase, controller model: Mitsubishi Meldas, counter spindle speed (max.): 8,000 rpm, Long-turning lathe with FMB bar feeder! TECHNICAL DETAILS Turning diameter over bed: 20 mm Spindle bore: 24 mm Turning length: 200 mm Spindle speed: 20–10,000 rpm C-axis resolution: 0.001° Counter spindle / pick-off station Pick-off diameter: 20 mm Turning length: 80/600 mm Spindle speed: 200–8,000 rpm C-axis resolution: 0.001° Rapid traverse rates X/Y/Z: 32 m/min MACHINE DETAILS Control system: Mitsubishi Meldas Collet size: F25 (145E) Guide bushing: Neukomm T223 (22.001) Swivel angle of the tool block: 90° Driven tool positions: 3 Number of axes: 5 + 2 C-axes Total power requirement: 2.2/3.7 kW Dimensions & Weight Footprint: approx. 2.4 × 1.1 × 1.8 m plus loading magazine Machine weight: approx. 2.3 t EQUIPMENT CNC control system FMB 3-26 loading magazine Swiveling tool block with driven tools for radial and tangential machining Dedpfs Ah Du Hjx Aizecp Guide bushing by Neukomm Documentation On-board tools

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 10,000 rpm, bar passage: 20 mm, travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, Equipment: bar feeder, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar diameter: 20 mm Linear axes: 6 Travel range X1 axis: 58 mm Travel range Y1 axis: 534 mm Rapid traverse speed: max. 30 m/min Spindle speed: 100–10,000 rpm Spindle motor power: 3.7–5.5 kW Speed of driven tools: max. 10,000 rpm Tool positions: 10–14 MACHINE DETAILS Dcjde Ahgklepfx Aizop Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Connected load: 13 kVA Rated current: 19 A Fuse rating: 32 A Control voltage: 115/230 V Direct current: 24 V DC Dimensions & Weight Machine dimensions: 2,400 × 2,060 × 1,370 mm Machine weight: approx. 3,000 kg EQUIPMENT ROBObar SBF-532 bar feeder

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Dcjdpfoz Uxmbjx Aizsp Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: excellent (used), Year of construction: 2007, operating hours: 5,314 h, functionality: fully functional, machine/vehicle number: XD-20-BB-0452, spindle motor power: 4,300 W, turning length: 60 mm, spindle speed (max.): 8,000 rpm, turning diameter: 20 mm, spindle bore: 24 mm, overall weight: 3,250 kg, bar passage: 20 mm, total width: 1,490 mm, total length: 2,258 mm, total height: 1,758 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, drilling capacity: 10 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 210 mm, thread cutting capacity: M 10, power of the servo motor: 940 W, counter spindle motor power: 3,800 W, counter spindle speed (max.): 8,000 rpm, Equipment: rotational speed infinitely variable, Hanwha XD20N, year of manufacture 2007 – CNC Swiss-type long-stroke lathe without a guide bushing. Compact CNC lathe for serial production of smaller, precision parts from bar stock. The machine is equipped with a main spindle, a counter-spindle, and four cross-drilling powered tools, which allows for complete machining of the part from both sides in a single simultaneous cycle. Particularly suitable for short and medium-length parts where a guide bushing is not required. Very low operating hours for the machine considering its year of manufacture: automatic operation hours 7,454 hours, machining time 5,314 hours. The machine comes with various collets and chucks – everything installed in the machine plus additional ones, as shown in the photos. Direct sale to the end-user only. W-Technology s.r.o. Polní 8 Djdszw Nt Sspfx Aizjcp 79201 Bruntál Czech Republic

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 2,300 kg, type of input current: three-phase, Citizen L20, year of manufacture: 2004 + FMB 3-26, for sale. Machine type: CNC turning center + magazine loader FMB CITIZEN Type: L5 20-VIII Year of manufacture: 2004 Control: CNC Country of origin: Japan Incoterms: EXW Delivery time: Immediate Description: Text Value Unit CNC turning center Citizen L5 20-VIII with magazine loader FMB 3-26 Collet size F25 (145E) Guide bushing (Neukomm) T223 (22.001) 3-position block with driven tools, can be swiveled by 90° (radially or tangentially) Accessories: Documentation, standard tooling Technical details / Accessories / Additional information: Manufacturer: Turning diameter over bed 20 mm Spindle bore 24 mm Turning length 200 mm Spindle speed 20-10000 rpm C-axis 0.001 ° Parting station 20 mm Dedpe Ahg Saefx Aizocp Turning length 80/600 mm Spindle speed 200-8000 rpm C-axis 0.001

Condition: like new (used), Year of construction: 2019, operating hours: 7,300 h, machine/vehicle number: IntNr231648, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2019, with only approximately 7,300 operating hours. Technical data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine type: CNC Swiss-type automatic lathe Year of manufacture: 2019 Control system: FANUC 31i-B Number of CNC axes: 8 Number of spindles: 2 Operating hours: approx. 7,300 h Condition: very good Main spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 min⁻¹ Spindle drive power: approx. 4 kW C-axis Counter spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 min⁻¹ Drive power: approx. 4 kW C-axis resolution: 0.001° Tool turret 1 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Tool turret 2 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Front machining Dcede Ahq S Hopfx Aizop up to 4 tool positions Rear/opposite-side machining Up to 8 tool positions Of which up to 4 are driven positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected while powered on by prior arrangement. Subject to changes, errors and prior sale!

Condition: used, Year of construction: 2011, bar material dia. 20 mm spindle passage 34 mm turning length 200 mm turning speeds 10000 U/min Dsdj Ah T Uhepfx Aizjcp c-axis 0,001 ° Grad gripping station 20 turning length 50 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 9+7+4 =20 number of milling stations 4 control Mitsubishi Meldas Number of axles 5+2x C Achse St. chip conveyor ja/yes Knoll Number of working hours 5000 h total power requirement 3,7 kW weight of the machine ca. 2.550 kg dimensions of the machine ca. 2,1 x 1,2 x 1,8 plus FMB m Citizen A20-VIIPL CNC swiss type lathe, built in 2011 with FMB Minimag 20 loading magazine, In very good condition! Regularly serviced by Citizen. The machine has been operated in 3 shifts, 5 days a week. Several Citizen A20-VIIPL machines are available. Reason for sale: The project has now come to an end. Several Citizen A32-VIIPL machines are also being sold. Year of manufacture: 2011 Reason for sale as above. Take this opportunity to enquire about package prices. Go to the Citizen A32-VIIPL page on the website Accessories: 1x main and take-off spindle (diameter). 1x channel for FMB Standard oil and chip containers Translated with (free version)

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Dodpfx Aio Ah T Upszscp Number of axles 5+2x C Achse 7 St. load magazine FMB 3-36 total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m Citizen A32-VIIPL CNC swiss type lathe, manufactured in 2011 with FMB Turbo 3-36 loading magazine, In very good condition! Regularly serviced by Citizen Service. The machine has been operated in 3 shifts, 5 days a week. Several Citizen A32-VIIPL machines are available. Reason for sale: The project has now come to an end. We are also selling several Citizen A20-VIIPL machines. Year of manufacture: 2011 Reason for sale as above. Take this opportunity to enquire about package prices. Go to the Citizen A20-VIIPL page on the website. Accessories: 1x main and take-off spindle (diameter). 1x channel for FMB Standard chip container

Condition: like new (used), Year of construction: 2016, operating hours: 9,300 h, machine/vehicle number: IntNr231649, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2016, with only approximately 9,300 operating hours. Technical Data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine Type: CNC Swiss-type automatic lathe Year of Manufacture: 2016 Control System: FANUC 31i-B Number of CNC Axes: 8 Number of Spindles: 2 Operating Hours: approx. 9,300 h Condition: very good Main Spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 rpm Spindle drive power: approx. 4 kW C-axis Counter-Spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 rpm Drive power: approx. 4 kW Dsdpfe Ahq Tcox Aizjcp C-axis resolution: 0.001° Tool Carrier 1 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Tool Carrier 2 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Front machining Up to 4 tool positions Rear/Opposite-side machining Up to 8 tool positions Of which, up to 4 are driven positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected under power by prior appointment. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2017, overall weight: 3,600 kg, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, number of axes: 9, This 9-axis TSUGAMI HS327 swiss type turning machine was manufactured in 2017. It features a maximum machining diameter of 32 mm and includes a main spindle with 8 positions for turning tools. The machine has been completely overhauled in 2022, ensuring optimal performance. If you are looking to get high-quality turning capabilities, consider the TSUGAMI HS327 machine we have for sale. Contact us for further details. Dcodpfs Ahzbzjx Aizsp - Number of Axes: 9 axes (X1, X2, Y1, Y2, Z1, Z2, B 135°, C1, C2)- Max. Machining Diameter: 32 mm- Overhaul Status: Completely overhauled in 2022- Main Side:- Main Spindle: 1, Z1 / C1 axis- Turning Tools: 8 positions- Front Tool Holder: 4 driven cross tools (3 x AR16 and 1 x AR20)- B-Axis Tool Holder: 8 driven tools AR16 (front and back), 4 stationary boring tool positions (Ø 25 mm)- B-Axis Swivel Angle: 0° to 135°- Max. Speed Driven Tools (B-axis): 5,000 rpm- Sub-Spindle / Back Working Side:- Sub-Spindle: 1, X2 / Z2 / C2 axis- Rear Tool Holder: 4 stationary tools and 4 driven tools (Max. 8,000 rpm, AR16 collet, max. drill Ø 8 mm, max. thread M6)- Associated Bar Feeder:- Optional Equipment:  - Chip Conveyor: Inclined scraper/hinged belt chip conveyor (pallet-mounted)  - High-Pressure Coolant / Filter Unit: External high-pressure pump unit with control panel mounted on pallet - Bar feeder: Manufacturer: FMB MASCHINENBAU - Type: Turbo 3-36 / 3200 A - Year of Manufacture: 2017 - Bar Capacity: 3–38 mm (nominal 3–36 mm) - Bar Length: 3,200 mm Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2007, operating hours: 61,700 h, functionality: fully functional, machine/vehicle number: 7831, spindle motor power: 5,500 W, turning length: 231 mm, spindle speed (max.): 10,000 rpm, turning diameter: 25 mm, spindle bore: 25 mm, overall weight: 3,000 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, feed length Y-axis: 534 mm, feed length Z-axis: 230 mm, total width: 1,400 mm, total length: 2,400 mm, total height: 2,060 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar diameter (max.): 25 mm, quill travel distance: 230 mm, quill diameter: 25 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, power: 5.5 kW (7.48 HP), travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, travel distance Z-axis: 230 mm, operating pressure: 6 bar, Equipment: documentation/manual, rotational speed infinitely variable, Tornos Deco SIGMA 20s Swiss-type automatic lathe, including Robobar SBF-532 3000mm bar feeder, Mayfran Consep chip conveyor with drum filter (unique version), electrostatic oil mist collector, and an automatic CO₂ fire suppression system (Kraft & Bauer). Fitted with a Fanuc 31i-model A CNC control, spindle speeds up to 10,000 RPM on both the main and sub spindles. The machine features 6 axes and 22 tooling positions: Main spindle: 12 positions, 6 of which are driven (up to 6,000 RPM) Sub spindle: 10 positions, 6 of which are driven (up to 6,000 RPM) Also equipped with high-pressure coolant, up to 80 bar. The machine can be inspected under power. Dismantling and transport are the responsibility of the buyer. Parts included with the machine: • External holder left, long – 6× (417608) • External holder left, short – 1× (417606) • Single driven holder, reduced speed – 2× (417612) Dcjdpfoyrg Ahex Aizsp • Double clamping, long – 2× (417617) • Double clamping, short – 2× (417620) • Driven block – 2× (417624) Bushings for pusher diameters (216787): • Ø10 • Ø16 • Ø20 • Ø25 Ejector set: • Ø5 to Ø20 (in 1 mm increments)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,709 h, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, overall weight: 2,750 kg, total width: 1,440 mm, total height: 1,760 mm, bar diameter (max.): 35 mm, travel distance Y-axis: 340 mm, controller manufacturer: FANUC, product length (max.): 2,060 mm, number of axes: 5, This 5-axis Hanwha XE35H was manufactured in 2022. It features a maximum turned diameter of 35 mm and impressive axis travels, including 312 mm in X (2) and 340 mm in Y. The machine is equipped with a maximum main spindle speed of 6500 rpm and a tool capacity of 21. If you are looking to get high-quality turning capabilities, consider the Hanwha XE35H swiss type turning machine we have for sale. Contact us for further details. • Maximum turned diameter: 35 mm • Axis travels: • X1: 62 mm • X2: 312 mm • Z1: 210 mm • Z2: 205 mm • Main spindle: • Power: 2.2/5.5 kW • Sub spindle: • Max speed: 6500 rpm Dodpfx Ao Ahq Aajizocp • Power: 1.5/2.2 kW • Number of tools: 21 • Tool shank: 16 x 16 mm • Cross slide speed: 6000 rpm • Cross slide power: 1.0 kW • Coolant tank capacity: 170 litres • Coolant pump power: 0.4 kW • Power consumption: 15 kVA • Air flow rate: 120–150 litres/min Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2012, overall weight: 3,500 kg, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, number of axes: 7, This 7-axis DOOSAN Puma ST32G was manufactured in 2012. It features a maximum machining diameter of 32 mm and includes a main spindle with a Z1/C1 axis. The machine is equipped with 6 turning tools and 4 driven cross-machining tools, providing versatile capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma ST32G swiss type turning machine we have for sale. Contact us for further details. Dcedpfe Ahzbdox Aizjp - Completely overhauled in 2022- Maximum Machining Diameter: 32 mm- Number of Axes: 7 (X1, Z1, C1, Y, X2, Z2, C2)- Main Spindle (Front Side): 1, Z1 / C1 Axis- Turning Tools (Front Side): 6 pieces (12 x 12 x 120)- Cross-Machining Tools (Front Side): 4 pieces (ER16) driven- Tool Holders (Front Side): 4 pieces (ER16M) driven- Sub-Spindle (Rear Side): 1 piece, X2 / Z2 / C2 Axis- Rear Tool Holder: 2 fixed tools and 2 driven tools- Deep-Hole Drilling: 2 tools- CNC Control Unit: FANUC Series 31i-MODEL A- Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz- Rated Power: 21.04 kW- Interrupting Current: 5.0 kA- Full Load Current: 33.18 A- Short Circuit Current: 10.0 kA- Circuit Diagram Version: ST20H31AA09- Machine Weight: 3,500 kg- Optional Equipment:Profluid High-Pressure Coolant System (Model: PFMF-7015-S4)Bar feeder FMB TURBO 3-36 / 3200 (2012) Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2017, operating hours: 13,700 h, machine/vehicle number: IntNr2316661, A CNC vertical turning center, TRAUB TNL 12, manufactured in 2017, equipped with a TRAUB TX8i-s control system and comprehensive peripherals, is for sale. The machine comes from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General technical data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of manufacture: 2017 Control system: TRAUB SYSTEM TX8i-s Dcodpfxj Ahfarj Aizjp CNC axes: 11 axes Max. bar diameter: 13 mm Max. turning length: 130 mm Operating hours (recorded) Control system ON: 22,868 h Production time: 13,620 h Spindle running time: 9,945 h Main spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Counter spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Tool carrier / Machining Tool turret: 2 turrets Tool stations: 6 stations each Powered tools: on all turret stations Tool drive (turret): Up to 8,000 rpm Tool drive power: 1.5 kW (25% duty cycle) Front machining unit: 4 tool stations Rear machining unit: 4 tool stations Simultaneous machining: Depends on the number of tool carriers Equipment and peripherals Bar feeder: FMB minimag 20 CO₂ extinguishing system: Kraft & Bauer FB 703 Coolant treatment: RESY compact belt filter system Oil mist extraction: NOVA, mounted on the machine Electrical connection data Voltage: 400 V / 50 Hz / 3-phase Connected power: 16 kW / 19 kVA Rated current: 27 A The machine can be inspected by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, turning length: 500 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, spindle bore: 26 mm, bar diameter (max.): 26 mm, operating pressure: 60 bar, Machine in production under power, no defects, can be inspected in production. Dsdez Smfuepfx Aizecp Equipement: - 2x spindle - 2x C axsis - live tools for main and sub spindle - swarf coveyour - Iemca bar feeder - high pressure pump - Siemens controller - all books and manuals

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231704, Dsdo Ah Rvwepfx Aizjcp

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Djdpfx Asz U Acmsizscp Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. Dcsdpfoy Udcfsx Aizjp It includes a bar feeder and a chip conveyor. The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,872 h, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 4,300 kg, total width: 1,440 mm, total height: 1,865 mm, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B5, product length (max.): 3,320 mm, number of axes: 11, This 11s STAR MICRONICS SV-38R type B was manufactured in 2015. It features a maximum turning diameter of 38 mm and a maximum headstock stroke of 350 mm. The machine is equipped with a FANUC Series 31i-MODEL B5 CNC control and offers rapid traverse speeds of up to 30 m/min. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SV-38R type B swiss-type CNC sliding-headstock automatic lathe we have for sale. Contact us for further details. • Axis diagram: X1, Y1, Z1, X2, Y2, Z2, X3, Y3, Z3, B3, C1, C2 • Machining capacity: • Max turning diameter: 38 mm • Max headstock stroke: 350 mm • Rapid traverse: X1/X2/X3/Y1/Z1/Z2/Z3 30 m/min; Y2 20 m/min; Y3 15 m/min • Main spindle: • C-axis control • Motor power: 7.5 kW continuous / 11 kW (10 min, 25% duty) • Main spindle collet • Synchronous rotary guide bush with air blow • Sub-spindle: • Max speed: 7,000 rpm • C-axis control • Motor power: 5.5 kW continuous / 7.5 kW (10 min, 40% duty) • Sub-spindle collet • Air blow • Tooling system: • 5-position gang tool post • 10-position tool turret • 8-spindle back-working unit • Front drilling: 3 tools per station • Max drilling diameter: 23 mm • Max tapping capacity: M16 × 2.0 • Driven tooling: • Gang tool post: 4 driven positions; max speed 6,000 rpm; motor 2.2 kW • Turret: 2 driven tools per station; max speed 5,700 rpm; motor 2.7 kW continuous / 4 kW (5 min, 30% duty) • Max drilling diameter (driven): 10 mm • Max tapping capacity (driven): M8 × 1.25 • Built-in/standard equipment: • Cut-off tool breakage detection • Automatic central lubrication • Hydraulic unit • Pneumatic unit • Coolant level indicator • Leak detection switch • Work area lighting • RS-232C interface Additional equipment • Bar feeder: FMB Maschinenbau, model FMB turbo 5-55 / 3200 A (Year 2016) • Max bar length: 3,200 mm • Bar diameter range per supplied spec: 5–65 mm (to be confirmed with feeder documentation) • Feed speed: 0–1,000 mm/s; Return speed: 0–1,000 mm/s • Bar feeder interface • Note: Actual machining diameter limited by lathe to 38 mm • Finished parts conveyor Additional information • The machine is fully operational and does not require any repairs. • The machine has only been used to process brass. It has never been involved in a collision. Technical Specification Counter Spindle Yes Driven Tools Yes Dodpfx Aj Agmnzsizscp

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, Machine in production, can be inspected. Machine is running without any defects. Dcodpfjzx Arqsx Aizjp Machine is equipped with: - bar feeder FMB - swarf conveyour - increased pressure pump - 2x spindle - front and back drilling tools - live tooles for milling - part coveyour belt - signal lamp

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, overall weight: 1,650 kg, 2 machines and bar feeders are for sale STAR Micronics SB-16 Type C 480 – CNC long-turn lathe CNC long-turn lathe from STAR Micronics, manufactured in 2007, equipped with a FANUC CNC control, main spindle and counter spindle, as well as powered tools. The machine features an FMB bar feeder magazine. - Manufacturer: STAR Micronics - Model: SB-16 Type C 480 - Machine type: CNC long-turn lathe - Year of manufacture: 10/2007 - Control: FANUC Series 18i-TB - Maximum bar diameter: 16 mm - Main spindle: Present - Counter spindle: Present - Powered tools: Present - Machine weight: approx. 1,650 kg Equipment: - FANUC CNC control - Main and counter spindle - FMB Turbo 2-18 bar feeder magazine Dcodps Ahyztsfx Aizop Technical specifications based on previous machine research. Errors, changes and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AC0135, EQUIPPED WITH IEMCA BOSS 332E/32, NEW IN 2010 - FANUC 30i-A (CINCOM SYSTEM FS32i-A) - MACHINE ARRIVING SOON, MORE PHOTOS TO FOLLOW. Dedps Ah Dvgsfx Aizjcp

Condition: like new (used), Year of construction: 2023, operating hours: 12,147 h, functionality: fully functional, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Citizen A20-3F7 + FMB Minimag 20 bar FEEDER Year: 2023 7 axes: X1, X2, Y1, Z1, Z2, C1, C2 Removable guide bushing: can be used in both Swiss-type (sliding headstock) and fixed-headstock configurations. Maximum main spindle speed: 10,000 rpm Machining length: 200 mm X2 axis with linear guides Simultaneous C-axis control on both the main and sub-spindle, with back-working driven tools Short cycle times thanks to the advanced CNC control (Fanuc FS32i) Maximum machining diameter: 20 mm (standard) Machining length per chucking: 200 mm, or 2.5 × D in fixed-headstock mode Dedez D Tx Nopfx Aizocp Main spindle: 10,000 rpm, 3.7 kW Sub-spindle: 8,000 rpm, 1.5 kW Gang-type driven tools: 6,000 rpm, 0.75 kW Back-working driven tools: 6,000 rpm, 0.75 kW Compact footprint: approx. 2.5 m² Polygon turning function Equipped with an FMB Minimag 20 bar feeder.

Condition: used, Year of construction: 2000, operating hours: 44,000 h, machine/vehicle number: IntNr231371, STAR CNC sliding head lathe SA 16-12, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 44,000 Technical data - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 [mm] Dcsde Ahq Rtopfx Aizjp - Z-axis travel: 140 [mm] - Spindle speed: 8000 [rpm] - Spindle drive power: 2.2 [kW] - Number of tool positions: 13 TAILSTOCK SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 8000 [rpm] - Number of tool positions: 4 FMB Minimag bar feeder High-pressure unit 40 bar Collets, type: 138E (F20/87) (max. 16.5 mm) Guide bushings, type: 39.001 (F391) (max. Ø 17 mm) The machine can be inspected by appointment. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over bed Ø16 mm mm Dedpoztfw Eefx Aizjcp weight of the machine ca. 2,3 t dimensions of the machine ca. 2045 x 900 x 1685 m