Condition: used, Used machine Veneer jointing machine Machine number 1262050 Pgjdpfx Abswka I Ns Iow Motor power 2.5 HP Engine speed 2810 rpm Cutting length 3100 mm Saw blade diameter 180 mm Rear support board missing Movable Transport dimensions approx. 3700 × 700 1450 mm Weight approx. 200 kg Availability: approx. end of July Location: Cologne

Condition: used, Kuper FW 630 Mini The ideal machine for small veneer quantities with the technical advantages of all KUPER zig-zag gluing machines: Discus disks with tolerance compensation mechanism. The gluing medium is a KUPER special glue thread. The glue thread is automatically applied in a zig-zag line and guarantees tight and firm joint connection. The glue line is applied during pressing inwards during pressing, which means that the adhesive does not need to be sanded off. is no longer necessary. Technical data: Stand design 630 mm Veneer thickness approx. 0.4 - 2.0 mm Feed rate approx. 7 m/min Operating voltage 230 V, 50 Hz/60 Hz Total connected load 110 VA Space requirement 1050×905 mm = 0.95 m² Total height 475 mm Net weight 95 kg Gross weight 110 kg Psdpebi I Apofx Ab Ijgw always 10 pieces in stock FW 420 FW 630 FW 920

Condition: ready for operation (used), Dryer for veneer with 4 levels. In-feed and out-feed system Psdpfx Aew Ib A Ueb Isgw with quality sorting and sorting pockets.

Condition: used, Veneer Press OTT JU 90 -used- Pjdpswmmrasfx Ab Isgw ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Pjdpfxswmxmvo Ab Isgw Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: excellent (used), Veneer splicing machine Model : KUPER FWJ 920 In very good condition. Podpfx Abjtq Ey Tj Isgw

Condition: used, Year of construction: 1995, Used machine Year of construction 1995 Pgodpfxowi Adks Ab Ijw technical data: Working length: 3000 mm Handwheel tension Power unit 2 kW Availability: short term Location: Hesse

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Cutting and milling length 3550 mm Cutting height 45 mm Saw motor power 2.2 kW Pgedpfjwq D Tpex Ab Iow Milling motor power 1.1 kW Extraction channel Workpiece clamping by handwheel Year of manufacture 1978 Price 2800.-

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Pjdpfx Aew I E Dvjb Iegw

Year of construction: 1980, condition: used, saw cutter for veneer CUTTING TOOLS ADVANTAGES - German production - almost - very good condition - guillotine used - high quality, low price cutting length 3100mm pneumatic clamp + cutting height 50mm Pgsdpfx Abjdnprde Isw up / down saw adjustment with cutter + manual travel of the aggregate + Equipped with a back panel + dimensions of the worktop 2450x800mm engine power about 2kW Dimensions Length / Width / Height 4670/900 / 1300mm weight 650kg

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Pgodohbp Ifjpfx Ab Iew Dimension : 2,12m x 0,73m x 1,55m

Condition: good (used), Veneer Cutting Knife -1 pc Length: 260 cm Width: 8 cm Thickness: 0.13 cm Pjdpfogm E Rhox Ab Ijgw -1 pc Length: 260 cm Width: 9 cm Thickness: 0.13 cm

Condition: repair required (used), Year of construction: 1997, Brand: Casati Model: Z1000 Pgsdpjvw Tnkofx Ab Iew Machine no: 9709021 Year of manufacture: 1997

Condition: ready for operation (used), Kuper FWJ900 With glue thread, well-maintained condition Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Stand model, feed speed 7 mm, Pgodpfx Aevrk Sieb Iow Projection 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm

Condition: good (used), Year of construction: 1990, Kuper FW1150 veneer sewing machine, machine no. 30108291, built around 1990 Psdpfx Abov Rvpwj Ijgw

Condition: good (used), functionality: fully functional, ANGELO CREMONA DRYER model ER 18, 4400mm, 3 levels, steam steam consumption at 10 bar - 2200 calories/hour water consumption at 185° - 1100000 calories/hour PRODUCTION birch thickness 1.2mm initial humidity 80% final humidity 6% load 85% 4.2 m3/hour Installed power Kw 95.5 Machinery dismantled, requires overhaul. Podpfx Absvndvyo Iogw

Condition: used, Machine cleaned, function tested, overhauled, adjusted, test run Various parts replaced: cover – discharge roller – indicator light – both heating cables – contact brush – pressure gauge – V-belt drive used, good condition Make: Kuper Type: FWJ 900 Mach. No. 19094932 Projection 900 mm Heating: Air Space required approx. 1300 mm x 400 mm x 1400 mm Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, Pjdpfx Aev Hht Hsb Isgw without guarantee or warranty

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head cutting length 3050 mm Pjdpen An A Tefx Ab Iogw with rear support and fence

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Pgsdpfeipx Aisx Ab Iow Stock no: 2001307PÅL

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: 16000654/H167942, System for automatic stacking of rotary cut veneers, e.g. directly from a veneer dryer / stacker for rotary cut veneers, automatic stacking device, e.g. for installation/application after a veneer dryer. Speed: 240 m/min. Frequency: 400V 24V 50Hz. Weight: 2950kg. Pgsdpfx Aowya Smob Isw

Condition: good (used), Year of construction: 1999, functionality: fully functional, SHEARLING SYSTEM Psdpfevm An Ejx Ab Isgw consisting of: Loader Centering 1. model CE08 2. Angelo Cremona 3. Positions the log for loading on the peeler 4. Power supply 400Vac/50Hz – 50kW Max. hydraulic pressure 100 bar Compressed air consumption 0 L/min Weight kg Max. dimensions 600x300x400 5. Production capacity 4 logs per minute Peeler 1. model SFH870 2. Angelo Cremona 3. Obtains a wooden strip from the turning of the log 4. Power supply 400Vac/50Hz – 240kW Max. hydraulic pressure 100 bar Compressed air consumption 10 L/min Maximum dimensions 600x400x300 5. Production capacity 50 cubic meters per shift Cutting and selection line 1. model TSR27 2. Angelo Cremona 3. Transports the peeled strip to the cutter for optimized cutting of the sheets 4. Power supply 400Vac/50Hz – 70kW Max. hydraulic pressure 100 bar Compressed air consumption 0 L/min Maximum dimensions 300x200x200 5. Production capacity 50 cubic meters per shift Sorting line and vacuum unloader 1. model LTR27 2. Angelo Cremona 3. Separates and stacks the recovery sheets from the whole sheets to size 4. Power supply 400Vac/50Hz – 180kW Compressed air consumption Maximum dimensions 300x1300x500 5. Production capacity 50 cubic meters per shift

Condition: used, Machine cleaned, function tested, overhauled, adjusted, test run Various parts replaced: cover – discharge roller – pressure gauge – belt drive Pgjdpev Hhtysfx Ab Ijw used, good condition Make: Kuper Type: FWJ 900 Mach. No. 17063317 Projection 900 mm Air heating mobile Space required approx. 1300 mm x 600 mm x 1400 mm Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Maximum thickness 45 mm Built in 1994 With spare blade Pgjdov Nzpmjpfx Ab Isw

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Psdpfxjvwfaxe Ab Iegw

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm Pjdpfjvwf Dwox Ab Ijgw 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee