Edge banding machine

Brandt Optimat KDF 550C

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr Podpfol Txw Hjx Abhogn

Condition: excellent (used), functionality: fully functional, Surface planer HA 4 Planing width 450 mm Total table length 2500 mm Feed table 1500 mm Machine height 820 mm Max. chip thickness 15 mm Knife shaft rotation 4800 rpm Motor power 4 hp Weight 660 kg 3-knife shaft Pgjdpsinkfnjfx Abhon Transport available for an extra charge! Due to the age of the used machine, the warranty is excluded when selling to commercial customers.

Condition: used, Year of construction: 1997, - Edge banding unit Pgodpfxsd Inkts Abhjn - Cutting unit - Milling unit - Fine milling unit - Scraper blade - Buffing unit

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Pgedpfjyrqrtjx Abhen Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Pgsdpfx Abjw Tivmjhsn Operating Units: 7 nr

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Psdpfxovxlq Ho Abhjgn Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Pgodovwbp Ajpfx Abhjn

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Pjdpfst Hal Djx Abhogn Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Pgjdpfskw H Ekjx Abhon Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: used, Year of construction: 2008, POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed 20 m/min Manual infeed guide Pre-trimming unit EVA glue application and pre-melting unit Edge holder plate End trimming unit Two-motor overlapping trimming unit Two-motor staggered chamfering unit with NC adjustments Two-motor rounding unit Edge scraper unit Glue scraper unit Brush unit Pedpfx Abow Db Rfshjgn