Used 4 Colour Press for sale (66,905)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Bedpfx Aod Tbbdjqxeww - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice Bjdped Tqalsfx Aqxsww - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time Bwedpfxsfdkbhj Aqxsw - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals Bedpfx Aqjfdkb Toxsww - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: used, mileage: 13,866 km, power: 265 kW (360.30 HP), first registration: 04/2009, fuel type: diesel, empty load weight: 22,445 kg, maximum load weight: 3,555 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,820 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, compressor, crane, cruise control, differential lock, low noise, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, registration no. house, swivel seat, electric mirror, heated mirror, electric window left, electric window right, sun visor, cruise control, switch 16, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, work lights, storage box, leaf suspension, low-noise G1, U-protection, lateral aluminum driving protection, roof hatch, emergency stop, foldable, 4-point hydraulic outrigger, radio remote control, environmental badge green, compressor, radio remote control, radio remote control, green environmental sticker, compressor Wheelbase: 3820 mm Superstructure: 10m lifting platform AMV from 1998, compressor, 400V generator and radio control 7807 operating hours! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bodpfx Aevhlndeqxjww - .

Condition: used, mileage: 2,49,399 km, power: 95 kW (129.16 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 3,355 kg, maximum load weight: 1,245 kg, overall weight: 4,600 kg, tire size: 205/75R16C, axle configuration: 4x2, wheelbase: 3,665 mm, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 3, Equipment: ABS, additional headlights, cabin, electronic stability program (ESP), low noise, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, Kz. house, double bench seat, electric mirror, electric window left, electric window right, ABS (anti-lock braking system), traction control (ASR), auxiliary drive, automatic, rotating beacon, storage box, leaf suspension, U-protection, side aluminum road protection, environmental badge green Wheelbase: 3665 mm Body: Contex Hydrobox Belicar 2 SA 6.0 approx. 6m³ right-hand drive! Front axle with increased load capacity, ESP, rear spring harder, front axle stabilizer reinforced, front spring and damper reinforced, hill start assist, PSM, lockable glove compartment, reversing alarm, adaptive brake light, driver airbag, smoker package, front engine output with carrier for additional generator. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Bedpfx Asvhl R Seqxsww

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Bsdpev Hchljfx Aqxoww Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Bwjdozdgnbjpfx Aqxsw Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 2,80,000 kg, Vaccari PVE 560 Screw Press (2010) Bwsdoz Tzwgopfx Aqxsw 31,500kN force All additional information available on AllSurplus.com

Condition: used, Year of construction: 2009, machine/vehicle number: 3346, functionality: fully functional, pressing force: 1,700 t, Vaccari PV 410 Screw Press (2009) 1700 Ton Capacity Bwjdpfjz Tzxwex Aqxjw Press Includes Electrotherm vacuum furnace for Heating Part 2x Robots for loading/unloading parts and components from furnace to press and then post stamp removal

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Drive Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Bwjdpfo Aa Ndyjx Aqxew Operating voltage: 380 V Control voltage: 220 V Dimensions Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Handwheel for stop adjustment with display scale Automatic star-delta starter

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Bwsdpe Aa Nl Refx Aqxsw TECHNICAL DETAILS Performance data Pressure: 10 t Stroke rate: 180 strokes/min Total power requirement: 1.1 kW Machine weight: approx. 0.6 t Stroke and ram data Stroke: 8–60 mm Ram adjustment: 40 mm Ram surface area: 180 × 110 mm Working area Overhang: 180 mm Table Table surface area: 400 × 340 mm Table height above floor: 935 mm Through-hole in the table: 80 mm Dimensions Space required: approx. 1.2 × 1.5 × 2.0 m EQUIPMENT Two-hand operation Foot operation Control cabinet

Condition: like new (used), Year of construction: 2026, machine/vehicle number: Pro.b 301365530.165, functionality: fully functional, pressing force: 30 t, stroke length: 535 mm, number of cylinders: 6, workpiece length (max.): 3,000 mm, cylinder diameter: 60 mm, No minimum price – guaranteed sale to the highest bidder! The machine is new and has no operating hours! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 30 t Number of cylinders: 6 Cylinder diameter: 60 mm Plate material: Steel Bwodpj Af Hidefx Aqxsw Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 535 mm Total stroke: 535 mm Number of working areas: 1 MACHINE DETAILS Operating hours: 0 h Voltage: 400 V Current consumption: 5 A Fuse rating: 16 A Main motor power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,700 x 1,950 mm Unladen weight: 2,000 kg Number of transport packages: 1 EQUIPMENT Documentation CE certificate CE marking

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS MANUFACTURER AND MODEL Manufacturer: REYER Machine type: Spindle press WORKING AREA Table dimensions: 650 × 550 mm Bedps Adzh Esfx Aqxjww Flywheel diameter: approx. 2,000 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 2,200 mm Weight: 700 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Machine type: Press brake Performance Data Press force: 800 kN Press force: 80 t Working length: 2,550 mm Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Bjde Adzr Repfx Aqxjww Rated current: 29 A MACHINE DETAILS Dimensions Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Table dimensions: 230 × 200 mm MACHINE DETAILS Manufacturer: Mäusle Machine type: Spindle press Dimensions, length: 750 mm Bodpfj Ad Abgex Aqxsww Dimensions, width: 550 mm Dimensions, height: 1,500 mm Weight: 200 kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS General Information Machine type: Single-column eccentric press Bwsdpfxs Achxbs Aqxsw Machine weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke rate: 120 strokes/min Stroke and Working Data Overhang: 250 mm Stroke: 8–100 mm Installation height: 330 mm Ram adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping plate: 700 × 480 mm Through-hole in the table: 240 mm Through-hole in the clamping plate: 110 mm Ram clamping surface: 450 × 280 mm Tilting Design Tilting stages: 4 Through-hole to the rear: 325 × 500 mm Through-hole downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Part counter Various accessories

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled tool milling machine Condition: good Travel distances X-axis travel: 580 mm Y-axis travel: 400 mm Z-axis travel: 450 (390*) mm Work table Table size: 460 × 800 mm Spindle Spindle speed range: 40–4,000 rpm Spindle taper: SK 40 Spindle drive: 4.0 kW Vertical head: rotatable ±90° Quill stroke: 80 mm Horizontal spindle: available Feed rate and rapid traverse Feed rate range: 2–3,600 mm/min Feed rate: 4.0 m/min Feed axes: 3 axes Control system Control system: Contour 2 Dimensions Space requirement: approx. 3.0 × 2.10 × 2.10 m EQUIPMENT Hydraulic tool clamping Mobile control panel Bjdpo Aa Atzjfx Aqxoww Electronic handwheel Automatic central lubrication Coolant system Safety emergency stop Chip tray Separate control cabinet

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Bodpfx Aqozaa Uajxjww Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, oil tank capacity: 400 l, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Bwedpfx Aoxwnqcoqxew

Condition: new, Fully automated system Energy saving Industry 4.0 Bwjdpfog Adn Iox Aqxsw Durma Cloud Fiber laser technology Environmental awareness Synchronous, minimal working area High, precise repeatability High process accuracy Compact design Low noise level Simple and fast installation Upon request, we will send you informational material.

Condition: new, pressure: 40bending length: 1530column width: 1530daylight: 590stroke lenght (max.): 300messurements (LxWxH): 2660x1960x2500weight approx.: 4600motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Bodjd Etfzepfx Aqxeww

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 450 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3000 H x 1781 W x 1196 D mm Machine weight: 1300 kg Transport height: 2300 mm Bsdjvamafopfx Aqxjww Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4 kW Press Output per hour: depended on material Hopper opening: 1.044 x 1.044mm Controlled by PLC Bsdpjvptrtofx Aqxsww Hydraulic tank: 100l New exhibition machine with 5 operating hours

Condition: new, Year of construction: 2026, functionality: fully functional, The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Bjdpfeu Iwgvsx Aqxoww Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy bale removal Retainers to prevent material spring back Reel holder for 2 rolls of strapping A quality product „Made in Europe“ Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional Extras Machine colour RAL Can crusher insert AUTO compaction cycles Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor