Used 4-Axis Cnc Wire Bending Machine for sale (1,01,047)

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Fpodoxpqy Djpfx Aa Nog Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm Fodpey Ih Rgofx Aa Nspg - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Fpedpfxevvi Sps Aa Nsg Storage location: Nattheim

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Fjdpox Hllxsfx Aa Njpg Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Year of construction: 2005, condition: used, CNC Machining Center 4 Axes – FOM (Aluminium/Steel Profiles) Configuration: 4-axis CNC Working length (X): 7,030 mm Condition: Working, maintained - Main Features CNC machining center designed for drilling and milling operations on aluminium and steel profiles, ideal for window and industrial profile production. 4-axis spindle (0° / 90° / 180°) for multi-side machining Electrospindle 4 kW – up to 12,000 rpm Tool holder: ISO 30 DIN 69871 6-position automatic tool magazine 6 pneumatic clamps (manual positioning) THK linear guides for high precision - Control & Software Software: FomCam + Prof2 (Windows XP) Easy programming with automatic CNC generation Movable control console (PC + display + keyboard) Barcode reader connection Remote control capability 📏 Technical Data X-axis: 7,030 mm Y-axis: 1,100 mm Z-axis: 425 mm Fpodpsywhf Njfx Aa Neg Machine dimensions: 8,307 x 1,875 x 2,460 mm Weight: 3,200 kg - Equipment Forced air spindle cooling Inverter-controlled spindle Automatic lubrication Protected tool magazine with rotary system - Machine ready to work, ideal for aluminium profile machining and window production.

Condition: used, Year of construction: 2014, operating hours: 29,759 h, machine/vehicle number: 62141109, 24-position tool changer, travel distances X/Y/Z: 2,000/1,300/1,850 mm, spindle speed: 4,000 rpm, with magnetic clamping plate approx. 2,000x800 mm, chip conveyor, cooling unit, 1 HEIDENHAIN TT 460 reference probe, tool holder: SK50, footprint: 700x550 cm, without machining tools. The operating materials are included in the auction and must be taken by the buyer or properly disposed of. Fpedoyztgmjpfx Aa Njg

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Fsdeya Iaqepfx Aa Njpg Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Fjdpfxsiv Imns Aa Nopg Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,870 mm, travel distance Y-axis: 1,840 mm, travel distance Z-axis: 250 mm, number of slots in tool magazine: 24, controller manufacturer: TPA Albatros, Equipment: CE marking, documentation/manual, 4-Axis CNC Machining Center - UNITEAM SPRINT 4012-M Very comprehensive configuration suitable for the production of furniture, doors, and windows Year of manufacture: 2003 CE compliant machine No. of controlled axes: 4 Axis travels: X 4870 mm - Y 1840 mm - Z 250 mm - C 360° (for management of angular heads) Max axis speeds: X 85 m/min - Y 85 m/min - Z 25 m/min Working area: 4200 x 1300 mm No. 6 vacuum bar supports with 3 suction cups each No. 4 panel lifting bars No. 6+2 reference stops No. 6 individually disengageable clamps Vacuum pump rated at 100 m³/h Positioning laser Electrospindle: 9 kW (12 hp) - max speed 18,000 rpm - HSK63F interface Dual automatic tool changer (8 positions on head + 15 positions on Y-axis) Angular head: HSK63F with variable tilting Independent angular head for boring and saw blade with pneumatic tilt 0/8°, 3 kW (4 hp) motor Fjdpoy Dhg Tjfx Aa Nspg Independent horizontal motor: 5.6 kW (7.6 hp) - max speed 18,000 rpm Boring unit with 14 vertical drills, 2+2 and 1+1 horizontal drills, 3 kW (4 hp) motor No. 2 HSK63F tool holders included Numerical control: TPA Albatros (upgraded in 2018) with remote control panel Automatic centralized lubrication Front safety mats + full perimeter metal fencing User manuals + electrical diagram + CE certificate Installed machine footprint: 7500 x 3800 x 2350h mm Overall dimensions for transport: 13500 x 2400 x 2400h mm Total weight: 5,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Fodpfx Asyzyh Doa Nspg Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing.

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² Fedpfx Aajylyh Dj Nspg - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Fpedpfx Aasym Nbvj Njg Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: used, Year of construction: 2022, Working length: up to 7,000 mm Mode: single continuous working area Axes: 4 controlled CNC axes Tool rotation: from 0° to 180° Spindle power: 5 kW (S1) Tool magazine: 8 automatic tools Clamping: pneumatic clamps (compact design to allow maximum workability even with short parts) Structure: closed cabin (safety and soundproofing) Power supply: 400 V Frequency: 50 Hz Installed power: approx. 8 kW Compressed air: 7 bar Machine weight: approx. 3500–3600 kg X-axis speed: up to approx. 90 m/min Fedpsywhuqsfx Aa Nepg Operations: milling | drilling | tapping | end machining Materials: aluminium | PVC | light alloys | light steel (up to approx. 2 mm)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Fpedju Tln Nepfx Aa Njg Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 51 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, Equipment: CE marking, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 Sets of Dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feed Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H and V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending Simulation • Collision Simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Workpiece Material Length • Calculation of Estimated Bending Time • X-Y-Z to Y-B-C Conversion • Emergency Stop Foot Pedal with Mobile Function • Remote Assistance • Mandrel Bending and Mandrel-less Bending • Safety Plate behind Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Guide System Fpsdpfx Aaoxircao Nsg • Hydraulic Chuck Clamp • Safety Lock on Electrical Cabinet and Keyed Panel Lock • Electrical System Cooling Unit • Overload Protection • Detailed Operation Report Automatically Sent OPTIONAL EQUIPMENT (Not Included in Price) • Additional Sets of Dies • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Additional Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3 mm Maximum Bending Radius mm 250 mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50–200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kW Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports Fedpfx Aasxircgj Njpg OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950

Condition: used, Year of construction: 2000, operating hours: 70,000 h, Manufacturer: TBE BUTLER Model: TBE MULTIBEND Fully documented, available for inspection and verification! Wire diameter range: 1.0 mm to 10.0 mm 8 servo axes as standard – optionally up to 24 axes Integrated program memory Independent eyelet station Fedpfx Aajxclfhs Nepg Tilt control at the bending heads Servo indexing unit for 3D rotation Automatic part rotation for multi-level bending Modular tools – quick changeover times Integrated decoiler Complete diagnostic and fault-tolerance systems Touchscreen programming controls – Allen-Bradley®

Condition: ready for operation (used), Year of construction: 1999, Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement. Fodpfx Asylbqyja Nepg

Year of construction: 2005, condition: ready for operation (used), A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible. Fjdpfx Ajvmq Tvsa Nepg

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Fodpfx Ajycwtfja Nspg

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, A very well-maintained 4-roll CNC plate bending machine LUNA Model: 8344 17/06 Four-roll drive CNC control Mylock 100 Control system operates 4 functions: Feed, bending, clamping, and locking of the top roll Max. working width: 1750 mm Max. sheet thickness: 0.6 mm Year of manufacture: 2003 Fedpox Nw N Ijfx Aa Nspg Weight: 700 kg Made in Sweden

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Fedet R Tgijpfx Aa Nepg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Fpedpfxjy Ni Ive Aa Njg Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 28450 € Fedpfx Aajyb Szho Nopg 543.4 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel Fedpfjyv N E Ujx Aa Nopg - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration