Used 5 Axis Milling Center for sale (70,814)

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fanuc control, two turrets, Y-axis, Gsdpfxeyt R Ude Abhobi sub spindle, 65 mm spindle bore, short loader, tool holder, AGW,

Condition: good (used), Year of construction: 2021, functionality: fully functional, Fanuc control, 66 mm spindle bore, two turrets, two Y-axes, sub-spindle, parts catcher, short bar loader, Gsdpoycwwwofx Abhsbi high-pressure pumps, tool holders, tailstock function,

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Gbsdexp Rywopfx Abhei Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. Gbsdpfxjtuggcj Abhji FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, Year of construction: 1996, Type: Multispindle lathe Gbjdoyn Hmxjpfx Abhsi Make: Index Model: G200 Year of manufacture: 1996 Condition: Used Quantity: 1

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, X-axis 1,500 mm Y-axis 660 mm Z-axis 600 mm Table size 1,680 x 660 mm Spindle speed 12,000 rpm Tool holder SK40 Tool changer 24 positions Control ULTIMAX 4 Incl. 4th axis Kitagawa MR 200 (rotary axis + tailstock) Incl. chip conveyor Gsdpexm Tufjfx Abhebi Incl. internal coolant (IKZ)

Condition: good (used), Year of construction: 2006, Year of manufacture: 2006 CNC control: Mitsubishi MSX-850 X-axis travel (mm): 260 Z-axis travel (mm): 795 Y-axis travel (mm): 100 Swing diameter over bed (mm): ø 920 Godpov Egqzofx Abhobi Swing diameter over cross slide (mm): 742 Upper turret Number of tool stations: 12 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/15 Spindle bore (mm): 91 Chuck type: Hollow Chuck (10") Manufacturer: KITAGAWA Tailstock Tailstock travel (mm): 734 Taper: MT3 Equipment Chip conveyor Signal light High-pressure pump Foot switch for chuck or collet system Interface for bar feeder Basic machine: Dimensions/Weight Length (mm): 2,620 Width (mm): 1,898 Height (mm): 2,200 Weight (kg): 6,140

Condition: used, Year of construction: 2008, x-travel 410 mm y-travel 570 mm z-travel 140 mm control Mazatrol Matrix Maximum working diameter 545 mm Maximum working length 519 mm main spindle speed 35 - 6000 U/min tool taper Capto C6 rapid traverse y/x/z axis 30/26/33 m/min Gbedpeyt R Idofx Abhoi Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Main spindle: Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 rpm Equipment/accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit Godpfx Abexa Epbohsbi - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: used, 1 unit CNC turning and milling center with two spindles and two turrets MAZAK MULTIPLEX 620 MARKII, including tool cabinet and various contents, 1x desk 110x70x87cm, 1x tool cabinet 50x50x110cm, 1x computer, 1x monitor, 1x keyboard, as per images and inspection, self-dismantling. Condition: used. Storage location: production hall / left. Payment method: advance bank transfer. Shipping: Collection only – shipping is not offered for this item! Gedpfjyr Ianex Abhobi

Condition: excellent (used), Year of construction: 2011, • 1 CNC lathe (132), manufacturer Miyano, model ABX-64SY, year 2011, control unit Fanuc, model 31i-Model A, main/sub-spindle, 2x 12-position turrets, bar feeder FMB Turbo 5-55, chip conveyor Yoshida. Gedoytd Rxjpfx Abhsbi

Condition: excellent (used), Year of construction: 2011, • 1 CNC lathe (129), manufacturer Miyano, model BNJ-51Y3, year 2011, control Fanuc, main/opposing spindle, 12-position and 6-position turret, chip conveyor, manufacturer LNS, type Turbo MH500 Gbsdpfeytd Dxjx Abhoi

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 2,50,000 kg, overall weight: 4,00,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis Gedsytrxkjpfx Abhjbi - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2018, x-travel 750 mm y-travel 660 mm z-travel 650 mm Control Siemens spindle tunring speed 16.000 U/min tool taper HSK 63 The machine was used for machining aluminum and, in our assessment, is in good used condition. It can be inspected under power by appointment. Gbedpoyrt A Isfx Abhji Technical features & accessories: - Twin spindle - 5-axis - Pallet changer Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Gbedoyrrw Rspfx Abhsi Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, AWEA BM-1400 is a 4-axis machining center designed for precision, high accuracy and reliability. Table 1500×800 mm; travels X1400 mm, Y800 mm, Z700 mm. Spindle nose ISO 40, 0–12000 t/min (stepless), supply 50Hz 3x400V, total power 40 kVA; weight ≈12000 kg; size L4800×W2850×H3100 mm. Accessories: set of toolholders, high pressure coolant 40 bar, chip conveyor, dividing attachment 4th axis, electronic handwheel, RS‑232 interface, status light. Achieves tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Gedpsyr Hizsfx Abhebi

Condition: excellent (used), MAKINO V 33i Graphite is a 3‑axis machining center designed for precision, high accuracy and reliability. Capacities: table 750×450 mm with 4 T‑slots 18H8 at 100 mm, table load 300 kg; travels X650 Y450 Z350 mm; workpiece max L750 W635 H250 mm. Specs: spindle HSK E50 (nose–table 150–500 mm), stepless 300–30,000 t/min, torque 23.1 Nm; spindle power 17/13 kW; feed 1–20,000 mm/min, rapid 20 m/min; tool magazine 60 places, tool Ø max 80 mm, length 250 mm, tool change 4.8 s; 3×400 V 50 Hz, air 4–8 bar; machine ≈7700 kg, footprint 2330×2325×2600 mm, installed power 50 kVA. Accessories: lamp, oil‑mist extractor, spindle cooling, EROWA EASY ROBOT loader, status light. Achieves tight tolerances; suits automotive, watchmaking, tooling, aerospace and medical applications. Gbsdpfx Aboyr Hh Rehsi

Condition: excellent (used), Year of construction: 2018, operating hours: 3,970 h, functionality: fully functional, turning diameter: 32 mm, spindle speed (min.): 8,500 rpm, type of input current: three-phase, General Machine / Workpiece Data: Type: Swiss-type automatic lathe (8-axis configuration: 6 linear axes + 2 C-axes) Control: FANUC 32i-B CNC with 10.4″ colour display Max. bar stock diameter (main spindle): 32 mm (1.3 in) Max. bar stock diameter (counter spindle): 32 mm (some versions support up to 38 mm with optional components) Max. workpiece length: ~240 mm (9.4″) Axes & Travels: Linear axes: 6 axes (X1, Z1, Y1, X2, Z2, Y2) C-axes: 2 (main and counter spindle) X-axis travel: ~70 mm (2.8″) Y-axis travel: ~405 mm (15.9″) Z-axis travel: ~100 mm (3.9″) Gbjdpfsxwvgrex Abhei Spindles: Main spindle: Max speed: ~8,500 rpm Power: ~5.5 kW (7.4 hp) Torque: ~40 Nm (29.8 ft-lb) Tooling Total tool stations: up to ~41 (configurable) Driven tools: 8 standard driven tool stations (capable of up to ~6,000 rpm) Simultaneous machining: support for up to 2 tools working at the same time Max bar passage ~33–36 mm Coolant tank ~520 L capacity

Condition: used, Year of construction: 2007, CNC Turning-Milling Center CTX 410 - Year 2007 Heidenhain Plus IT control Godpfx Abexy Nqcohjbi - 3-jaw chuck - Driven tool stations - Tailstock - Chip conveyor - Coolant tank

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Gbedpfx Ajyia Tlsbhei Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table length: 3,500 mm, table width: 820 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 35 rpm, table load: 2,500 kg, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Gbjdpfxeytb Tqs Abhoi Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Gbodpfx Aex A Hczjbhsi Total number of drilling spindles: 30 Total number of tool changer positions: 72

Condition: excellent (used), Year of construction: 2021, Mazatrol SMOOTH control unit Max. Swing diameter: 695 mm Max. Machining diameter: 340 mm Max. Bar diameter: 35 mm Turning length: 600 mm Spindle speed 6,000 min-1 Counter spindle Gjdpfx Asyp Iaiobhebi 12-position turret with driven tool Chip conveyor FMB bar feeder SL 80V

Condition: used, functionality: unexamined, Ferwood Code: RU0009466 - Manufacturer Code: 03314K00 - Condition: Used - Functionality: Not tested - Compatible machine: - Weight: 15 kg - Dimensions: 70x46x34 cm - If interested, we offer a refurbishment service—please contact us. Gbodpeyrqt Refx Abhoi

Condition: used, functionality: fully functional, Ferwood Code: RU0009466 - Manufacturer Code: 03314K00 - Condition: Used - Functionality: Fully operational - Compatible Machine: - Weight: 15KG - Dimensions: 70X46X34 - If interested, we offer an overhaul service; please contact us. Gbedpfx Aboyrqr Hshsi