Used Amada Schiavi for sale (203)

Condition: excellent (used), Used Amada 60ton C frame press for sale Knedpfx Aoyk D Dtjpdeb SPECIFICATION MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Condition: ready for operation (used), control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 10 mm, total length: 4,600 mm, total width: 2,520 mm, total height: 1,850 mm, Equipment: angle stop, foot remote control, Sheet metal shear Amada GH1040 Z New blade set Knsdpfjx Igndjx Apdsb Fully functional Hydraulic cylinders were overhauled approximately 6 months ago.

Condition: good (used), Year of construction: 1987, operating hours: 42,846 h, machine/vehicle number: P2440355, CNC turret punch press with 24 stations Control: FANUC 6M Operating hours: 42,846 h Spindle motor: 5.5 kW Capacity: 20 tons Number of stations: 24 Kedexqr Sqopfx Apdsnb Material thickness: 6.35 mm Hole size: 88.9 mm Sheet size WITHOUT REPOSITIONING: 1000 x 1000 mm WITH 1 REPOSITION: 2000 x 1000 mm Max. sheet weight: 50 kg Speed: 30 rpm Stroke rate: 200 strokes per minute Net weight: 8,500 kg Dimensions (L x W x H): 4,500 x 3,200 x 2,200 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - Max. turning diameter : 50 x 40 [mm] UPPER RIGHT TURRET - X/Z stroke : 220 x 220 [mm] - Rapid traverse rate : 15 [m/min] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1880 x 1390 [mm] - Machine height : 1600 [mm] - Machine weight : 1600 [kg] Kjdjwdad Repfx Apdenb MACHINE HOURS - Number of working hours : 18941 [h] EQUIPMENT - CNC : Fanuc 21i-TD - Coolant tank - Parts catcher - Loading cell - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - Max. turning diameter : 60 x 60 [mm] UPPER RIGHT TURRET - X/Z stroke : 300 x 285 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1400 x 1575 [mm] - Machine height : 1670 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of hours under power : 68992 [h] - Number of working hours : 15107 [h] Ksdpfjwdafbex Apdenb EQUIPMENT - CNC : Fanuc 0i-TD - Coolant tank - Parts catcher - Loading cell - Electric transformer

Condition: ready for operation (used), Year of construction: 1998, controller manufacturer: FANUC, punching force: 31 t, sheet thickness (max.): 3 mm, overall weight: 16,000 kg, total width: 6,500 mm, total height: 3,050 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,270 mm, product length (max.): 8,300 mm, number of axes: 2, CNC punch press manufactured in 1998. This AMADA Vipros 358 King features a maximum workpiece length of 4,000 mm and a maximum workpiece width of 1,270 mm. It offers a punching force of 300 kN and a maximum stroke of 40 mm. If you are looking to get high-quality punching capabilities, consider the AMADA Vipros 358 King machine we have for sale. Contact us for further details. - Max. Workpiece Length: 4,000 mm- Max. Workpiece Width: 1,270 mm- sheet thickness: 3.2 mm- Max. Punching Force: 300 kN- Max. Stroke: 40 mm- Max. Feed Rate: 80 m/min- Infinitely Variable Feed Rate: Yes- Control Unit: FANUC- Declaration of Conformity: Yes- Conformity Marking: CE Mark Knedpfx Aozg D Atjpdjb

Condition: ready for operation (used), Year of construction: 2007, punching force: 31 t, sheet thickness (max.): 5 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, number of axes: 2, CNC punching machine manufactured in 2007. This AMADA EMZ 3610 NT features a press force of 300 kN and a travel distance of 2500 mm in the X-axis and 1525 mm in the Y-axis. It has a maximum material thickness capacity of 4.5 mm and a stroke rate of 1000 strokes per minute. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for further details. • Press force: 300 kN • Travel distance X/Y: 2500 mm/1525 mm • Travel distance X/Y with repositioning: 5000 mm/1525 mm • Max. material thickness: 4.5 mm • Max. table load: 160 kg • Travel speed X/Y: 100 m/80 m/min • Axis speed: 128m/min Knedpfeztc Izex Apdjb • Positioning accuracy: +/-0.1mm • Turret stations 45, auto-index stations: 2xB/2xC • Turret speed: 30rpm • Stroke rate: 1000 strokes/min • Machine weight: approx. 21000kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 1,08,000 h, laser power: 4,000 W, sheet thickness (max.): 6 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,875 mm, travel distance Z-axis: 380 mm, punching force: 30 t, TECHNICAL DETAILS Punching force: 300 kN Maximum laser continuous output: 4,000 W Travel range punching mode (X-/ Y-axis): 3,050 / 1,875 mm Travel range laser mode (X-/ Y-axis): 2,550 / 1,525 mm Travel range combined mode (X-/ Y-axis): 2,500 / 1,500 mm Travel range laser axis (Z-axis): 380 mm Maximum material thickness: 6 mm Maximum table load: 220 kg Traverse speed (X-/ Y-axis): 100 / 80 m/min Simultaneous axis traverse speed: 128 m/min Positioning accuracy: +/- 0.1 mm Number of turret stations: 45 (4 driven) Turret rotation speed: 30 rpm Maximum punching strokes: 780/min Parts chute dimensions: 400 x 1,525 mm Laser gas consumption: 10 l/h Laser wavelength: 10.6 μm Beam divergence: < 2 mrad Number of controlled axes: 7 (X/YP/YL/Z/T/C) MACHINE DETAILS Kedpfxoyx Hiie Apdjnb Control model: AMNC-F Resonator: FANUC AF4000E Table type: Brush table Machine frame: Bridge construction Press drive: Servo-electric Turret and table drive: AC servo motors Monitor: 14" LCD Memory capacity: 10 MB Flash ROM Storage drive: 3.5" HD, CD-ROM Interfaces: USB, RS 232, Ethernet Machine weight: 29 t Operating hours: approx. 108,000 h EQUIPMENT Parts chute Air Jet vacuum Barcode reader Wedge leveling elements Sheet deformation sensor "Punch and Forming" Integrated quadruple thread tapping unit M8 Quick-change system for nozzles and lenses Automatic focus system Automatic gas pressure control High-pressure cutting equipment (CleanCut) Aluminum cutting device (AluCut) Exhaust extraction system Cooling unit

Condition: used, Year of construction: 1985, cutting diameter 1300 mm saw band length 11880 mm cutting width 1,6 mm main drive motor 11 kW table surface area 2300x1200 mm cutting range 1300x1300 mm total power requirement 16 KVA weight of the machine ca. 17,75 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Ksdpfxszfqhte Apdjnb We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1990, pressure 25 t chamfer lenght 1250 mm distance between columns 970 mm Stroke beam 100 mm max. opening beam/table 270 mm C-recess 150 mm max travel X-axes 420 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 10 mm/sec opening speed 100 mm/sec length 1500 mm width 1000 mm height 2000 mm weight 1200 kg total power requirement 4 kW dimensions of the machine ca. 1,5x1,0x2 m All machines can be viewed under power at all times. Kjdpfx Asy Ruw Espdjnb Demonstrations of the machines possible at any time.

Condition: excellent (used), Technical specifications: Revision in 2024 Working length: 3100 mm Column width: 2760 mm Kodpfx Asv Tcnlepdjnb Press force: 220 tons CNC control: OPERATOR II Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Motorized adjustable backgauge Thrust: 650 mm Stroke: 200 mm Working height: 960 mm Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 80,162 h, pressing force: 51 t, stroke length: 200 mm, controller manufacturer: AMADA, controller model: Operateur, number of axes: 8, This 8-axis AMADA HFBO 5020 press brake was manufactured in 1998. It features a bending length of 2090 mm and a press capacity of 500 kN. The machine includes a stroke of approximately 200 mm and an open height of around 480 mm. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 5020 press brake we have for sale. Contact us for further details. • Stroke: approx. 200 mm • CNC control: OP-2 CNC • Controlled axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Open height: approx. 480 mm • Throat depth (frame throat/gap): approx. 400 mm • Distance between uprights: approx. 1,665–1,690 mm • Table width (bottom beam width): 60 mm • Working height (table height from floor): 910 mm • Max. hydraulic pressure: 270 bar • Number of cycles: 4 cycles/min (at nominal conditions) • Main motor power: 4.5 kW Technical Specification Ksdpfx Asy Alvpjpdonb Bending Length 2090 mm

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Knjdjwm Nn Rjpfx Apdjb

Condition: excellent (used), Year of construction: 1999, Technical data: Working length: 2550 mm Stand width: 2125 mm Kjdpsvrh Rcsfx Apdenb Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: used, Cutting length: 3100 mm Steel cutting capacity: 12 mm Kedpfx Asxuh Ipspdsnb Backgauge: 1000 mm

Condition: used, Year of construction: 1985, cutting diameter 1300 mm saw band length 11880 mm cutting width 1,6 mm main drive motor 11 kW table surface area 2500x1300 mm cutting range 1300x1300 mm total power requirement 16 KVA weight of the machine ca. 17,75 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Knjdpfx Apezfqg Njdjb About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: HFP 130-3 N050242, functionality: fully functional, operating hours: 4,970 h, stroke length: 200 mm, overall weight: 8,170 kg, bending force (max.): 132 t, working length: 3,100 mm, TECHNICAL DETAILS Kodpfx Apeylv Rhjdenb Pressing force: 1,300 kN Max stroke: 200 mm Working length: 3,100 mm MACHINE DETAILS 8-axis configuration: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Weight: 8,170 kg Voltage: 400 V Frequency: 50 Hz Rated current: 213 A Operating hours: 4,970 h EQUIPMENT Automatic Fiessler Alas laser system Euro-style tool clamping with quick-change adapters

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088 Knjdjxaa N Nepfx Apdob

Condition: ready for operation (used), Year of construction: 1998, operating hours: 78,026 h, pressing force: 102 t, overall weight: 6,750 kg, number of axes: 6, This 8-axis AMADA HFBO 100-30 press brake was manufactured in 1998. It features a maximum press force of 1000 kN and a bending length of 3100 mm, providing robust capabilities for various applications. The machine has undergone software upgrades and cylinder replacements in 2024. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 100-30 press brake we have for sale. Contact us for further details. • Distance between frames: 2700 mm • Maximum stroke: 200 mm • Number of axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Voltage: 400/415 V • Frequency: 50 Hz • Nominal current: 199 A • Number of phases: 3 • Installed power: 9 kW • Noise level: Knjdpfxjzl Dvqo Apdeb

Condition: ready for operation (used), tool grinding machine working perfectly Knedoyw N D Tjpfx Apdjb

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Knjdox Ed H Aepfx Apdjb

Condition: used, Year of construction: 1999, pressure 100 t chamfer lenght 3100 mm distance between columns 2750 mm Stroke beam 180 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 120 mm Z1+Z2 axes controlled by cnc 300-2700 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 29000 h length 3500 mm width 1950 mm height 2550 mm weight 6700 kg total power requirement 8 kW dimensions of the machine ca. 4x2x2,5 m Control CNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time. Kodpfsyw Tl Ijx Apdonb

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Kedpfx Apen Smg Tjdenb Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, pressing force: 170 t, working width: 3,100 mm, working range: 3,100 mm, AMADA MULTI AXIS CNC 170 TONS X 3100 HYDRAULIC DOWNSTROKING PRESS BRAKE WITH AMADA OPERATEUR II 8 AXIS CNC CONTROL Description TYPE HYDRAULIC DOWNSTROKING CAPACITY 170 TONS CONTROL AMADA OPERATEUR II NO OF AXIS 8 INCLUDING Z1 AND Z 2 BENDING LENGTH 3100mm OPEN HEIGHT 450 Knjdpfx Ajv Iftgepdsb STROKE LENGTH 180 THROAT DEPTH 410 MOTOR SIZE 15 KW FRONT GUARDING ERWIN SICK MACHINE MOUNTED ELECTRONIC GUARDS SIDE FENCING REAR INTERLOCKED WEIGHT 11 TONS

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, power: 17 kW (23.11 HP), pressing force: 220 t, stroke length: 180 mm, throat depth: 420 mm, total width: 3,650 mm, total height: 2,900 mm, overall weight: 17,900 kg, Hydraulic press brake Manufacturer: AMADA, Type: HFB 220-30 H Year of manufacture: 1991 Technical data Manufacturer: AMADA Type: HFB 220-30 H Year of manufacture: 1991 Press force: 220 tons Bending length: 3100 mm Stroke: max. 180 mm Overhang: 420 mm Distance between side supports: 2750 mm Power: 17 kW Dimensions: L 3,65 m, W 1700 mm, H 2900 mm Knsdpfx Aoy T R Ryjpdeb Weight: 12.9 t Equipment • Delem DA 58 2-D graphics control system • Controlled axes: Y1, Y2, X, R1, R2, Z • Large tool package, see photos • Amada quick-release tool clamping system All information is provided without warranty. A live demonstration is possible at any time in our showroom.