Used Automatic Turning Lathe for sale (28,688)

Condition: used, Technical details: Dkodpfju Idwnox Adrer number of spindles: 9 Stück weight of the machine ca.: 10,2 t Transfer machine with 9 Drill-& Mill spindles - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück Dedpfx Adju Idxrorskr control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Year of construction: 1989, functionality: fully functional, workpiece weight (max.): 13,000 kg, TORNIO PARALLELO usato da 500x5000mm, TIANSHUI SPARK mod. CW61100E, anno '89. Dsdpszg Tz Ssfx Adrekr

Condition: excellent (used), Year of construction: 2017, 2 x YOU JI TY 400 H Maximum turning diameter: 400 ∅ mm Maximum turning diameter: 250 ∅ mm Maximum turning height: 350 mm Maximum workpiece weight: 300 Kg Spindle speed: 4,000 rpm Tool turret (ATC): 8 Chip conveyor Dodpfx Aszlcvvodrokr Coolant tank Weight: 5,500 Kg

Condition: good (used), Year of construction: 1998, Automatic lathe KUMMER Standard K200 L-A D, No. A2222, year of manufacture 1998, control SIEMENS Sinumerik, with chip conveyor 2 identical machines available Dksdpfxeunw Eks Adrer

Condition: good (used), Year of construction: 1998, Automatic lathe KUMMER Standard Blitz K90 A D, No. B2235, year 1998, control SIEMENS Sinumerik, with chip conveyor Djdpfx Adsunw Hberekr 2 identical machines available

Condition: used, Year of construction: 2019, operating hours: 17,324 h, functionality: fully functional, machine/vehicle number: 06990000471, spindle speed (max.): 5,000 rpm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, input voltage: 400 V, overall weight: 6,500 kg, input frequency: 50 Hz, controller manufacturer: Siemens, controller model: 840d sl, For sale is a used DMG CTV 250 vertical turning center in good condition and ready for operation. The machine is equipped with driven tools, allowing for the economical complete machining of complex workpieces. The scope of supply also includes a parts conveyor belt with 30 shuttles for automated workpiece transport and efficient series production. Dkodpfx Aozg Dy Ejdrer If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, Vertical Twin-Spindle Turning Center - Siemens 840 D CNC control - VSC 400 Duo machine bed - 2 x disc turrets, 12 station, dia. 40 mm, driven - 2 x additional drilling and countersinking stations - Open workpiece transport system - Transfer and turning unit - Interface for an external handling system - Central high-pressure coolant supply with pump, 70 bar - Air blow-off for pick-up unit and clamping devices Dedpfx Aey N Snxsdrokr - Workpiece measurement system - Tool monitoring - Emag network option - Sister tool management system Swing diameter: 260 mm X travel: 860 mm Z travel: 200 mm Main spindles: 2 Max spindle speed: up to 4,500 rpm Spindle distance: 1,055 mm Main drive: 2 AC asynchronous motor 60% / 100% duty cycle: 39 / 28 kW Max torque: 460 Nm Rapid traverse (X / Z): 45 / 30 m/min

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,426 h, functionality: fully functional, machine/vehicle number: 101098, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 130 mm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Working stroke, X-axis: 150 mm Travel range, Z-axis: 200 mm Chuck diameter: 160 mm Turning diameter: max. 200 mm Machining diameter: max. 130 mm Part length: max. 110 mm Main spindle Spindle flange according to DIN 55026: Size 5 Spindle bearing, diameter front: 80 mm Speed, hybrid bearing: max. 6,000/7,500 rpm Main drive AC asynchronous motor: 1MB200E Indramat Low-voltage technology: Fanuc Power at 100/40 % duty cycle: 16/24 kW Torque at 100/40 % duty cycle: 102/153 Nm Rated speed: 1,500 rpm Feed drive Rapid traverse speed X: 60 m/min Rapid traverse speed Z: 30 m/min Feed force X and Z: 5 kN Ball screw diameter X and Z: 40 mm Acceleration X/Z: 5/5 m/s² Tool holder Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Tool length incl. holder: max. 190 mm Pitch circle diameter: max. 740 mm Pitch circle diameter Lifetool: max. 620 mm Tool holder with driven tools Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Speed: max. 6,000 rpm Rated speed: 3,000 rpm Torque at 10 % duty cycle: max. 37 Nm Torque at 25 % duty cycle: max. 26 Nm Torque at 100 % duty cycle: max. 14 Nm MACHINE DETAILS Closed standard automation Number of carrier bars with workpiece diameter 27 mm: 85 Number of carrier bars with workpiece diameter 18 mm: 130 Permissible total load: max. 120 kg Pick-up stroke depressed: 1 mm Pick-up stroke over-depressed EMERGENCY STOP: 5 mm Pick-up spring travel: max. 30 mm Chain length: 162 inches Chain pitch: 25.4 mm Chain tension with 27 carrier bars: 400 N Chain sprocket: Z = 30 Gear ratio: i = 100 Motor revolution/band revolution: 540 Loading time: 2–4 s Electrical equipment Operating voltage: 400–480 V Control voltage DC: 24 V Control voltage AC: 230 V Frequency: 50/60 Hz Connected load: 31 kW Supply line fuse: 50 A Design of the electrical system: VDE 0113 Operating hours: 5,426 h Dkedpoy T Iupefx Adror

Condition: ready for operation (used), Year of construction: 2006, operating hours: 91,318 h, functionality: fully functional, machine/vehicle number: 040033, rotational speed (max.): 5,000 rpm, working width: 120 mm, working height: 260 mm, working length: 360 mm, TECHNICAL DETAILS Work area X-axis: 360 mm Djdpfjy T Itrox Adrokr Work area Y-axis: 120 mm Work area Z-axis: 260 mm Handling area X/Z: 490/260 mm Maximum spindle speed: 5,000 rpm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose, cylindrical: ∅ 140 mm Feed force X/Y: approx. 8,000/10,000 N Feed force Z: 10,000 N Rapid traverse rate X/Z/Y: approx. 80/40/7.5 m/min Acceleration X/Z/Y: 7 m/s² MACHINE DETAILS Control system: SIEMENS Sinumerik Power at 100% duty cycle ED main spindle: 20 kW Torque at 100% duty cycle ED: 105 Nm Power at 40% duty cycle ED: 27 kW Torque at 40% duty cycle ED: 145 Nm Dimensions & Weight Machine dimensions (L x W x H): 2,430 x 2,000 x 2,850 mm Machine weight: approx. 7,500 kg Rated power: 20 kW Apparent power: 25 kVA Rated current: 36 A Voltage: 400 V Frequency: 50/60 Hz Operating hours: 91,318 h EQUIPMENT Sliding door: Sheet thickness 5 mm Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 91,318 h, functionality: fully functional, machine/vehicle number: 040018, rotational speed (max.): 5,000 rpm, controller model: SIEMENS Sinumerik, working width: 120 mm, working height: 260 mm, working length: 360 mm, TECHNICAL DETAILS Working area, X-axis: 360 mm Working area, Y-axis: 120 mm Working area, Z-axis: 260 mm Handling area X/Z: 490/260 mm Maximum spindle speed: 5,000 rpm Spindle bore: 65 mm Spindle diameter at the front bearing: 110 mm Cylindrical spindle nose: ∅ 140 mm Feed force X/Y: approx. 8,000/10,000 N Feed force Z: 10,000 N Rapid traverse rate X/Z/Y: approx. 80/40/7.5 m/min Acceleration X/Z/Y: 7 m/s² MACHINE DETAILS Control system: SIEMENS Sinumerik Dsdpfx Aoy T Im Eedrskr Power at 100% duty cycle ED, main spindle: 20 kW Torque at 100% duty cycle ED: 105 Nm Power at 40% duty cycle ED: 27 kW Torque at 40% duty cycle ED: 145 Nm Dimensions & Weight Machine dimensions (L x W x H): 2,430 x 2,000 x 2,850 mm Machine weight: approx. 7,500 kg Rated power: 20 kW Apparent power: 25 kVA Rated current: 36 A Voltage: 400 V Frequency: 50/60 Hz Operating hours: 91,318 h EQUIPMENT Sliding door: Sheet thickness 5 mm Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,778 h, functionality: fully functional, machine/vehicle number: 06800002061, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Dkodpfx Aoy T Ikkedrer Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Dksdpfxjy T Id De Adrjr Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Dsdpfx Aey T Iddodrekr Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 Dedpovbb U Hefx Adrekr with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Machine documentation available .

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. Dkodsqwlmqjpfx Adror main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: good (used), Year of construction: 1975, Turret lathe HESTIKA Type:HR42 built approx. 1975 Spindle capacity max : 42 mm with turret head and tool holder Multifix Type:B Spindle speed: 88 - 2800 rpm Collet chuck device, coolant device, machine documentation. Machine in good condition . Dkedsvgbqfjpfx Adrer

Condition: good (used), Year of construction: 1965, Turret lathe HESTIKA Type: HR32 built approx. 1965 Spindle capacity max: 32 mm with tool turret, collet chuck device, Spindle speed :200-3200 rpm with coolant device, machine documentation . Dedjvgbphjpfx Adrekr Good condition Ready for immediate use .

Condition: used, Year of construction: 2009, functionality: fully functional, Turning machine with carriage and tooling. Dkjdszg Hk Topfx Adror

Condition: used, Year of construction: 2008, feed length Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, Model Year: 2008 Width: 1,150 mm Length: 600 mm Height: 600 mm Dedpex S I Tijfx Adrokr Number of Axes: 4 Tool Holder: BT40 Spindle Speed (rpm): 8,000 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2007, functionality: fully functional, Model Year: 2007 Width: 1100 mm Length: 410 mm Height: 640 mm Number of Axes: 3 Tool Holder: BT50 Spindle Speed (rpm): 6,100 Dodpfx Ajx Tt I Uodrjkr Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: used, Year of construction: 2012, Model Year: 2012 Width: 1,050 mm Length: 515 mm Height: 600 mm Number of Axes: 3 Holder: BT40 Spindle Speed (RPM): 8,000 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek Djdpfx Adox Tuddsrskr

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 340 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 215 mm, spindle motor power: 30 W, turning diameter: 200 mm, turning height: 200 mm, rotational speed (min.): 4,000 rpm, Manufacturer: FAMAR Model: ERGO 250 Category: Vertical CNC Lathe Year: 2004 CNC Control: Siemens 840D Specifications Maximum turning diameter: Ø 350 mm Maximum machining diameter: Ø 200 mm Maximum machining height: 200 mm Spindle Integrated electric spindle Chuck: Ø 250 mm Spindle nose: ASA A2-6 Spindle speed: 6,000 rpm Spindle power: 30 kW Axes X-axis: 340 mm (820 mm total) Y-axis: 120 mm (±60 mm) Z-axis: 215 mm C-axis: 360° with 0.001° resolution Heidenhain optical scales on the axes Dksdszdu Dpjpfx Adror Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 20,000 mm/min Z-axis: 30,000 mm/min Turret 12 positions Powered tools Powered tool speed: 4,000 rpm Powered tool power: 8 kW Turning tools: 25x25 mm Boring bar: Ø 40 mm Equipment Automatic loading/unloading system Pallet shuttle with workpiece pallets Chip conveyor Coolant tank with high-pressure pump Fixed and powered tool holders Manuals and electrical diagrams CE declaration General Data Installed power: 50 kW Machine weight: 10,000 kg Dimensions: 5,200 x 3,200 x 3,200 mm (L x W x H)

Condition: excellent (used), We invite you to contact us for further information and to arrange a product presentation appointment Dkedpfxewnxhpj Adrjr

Condition: good (used), Year of construction: 1979, Schütte SF51 6-spindle automatic bar lathe Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle automatic bar lathe with a 51 mm spindle bore, ideal for the efficient serial production of turned parts. These robust machines feature an electronic cam control system that offers high process stability and flexibility for turning, drilling, and threading operations. The machine is valued for its stability and flexibility in manufacturing demanding workpieces. Technical status: The machine has been regularly modernized and is up to current technical standards. Dksdeyhpvpopfx Adrsr Maintenance & Servicing: Professional maintenance performed strictly according to schedule by specialists. Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle automatic bar lathe Number of spindles: 6 main spindles Control system: Conventional Spindle bore: 51 mm Max. feed: 125 mm Max. turning length: 102 mm Max. drilling depth: 102 mm Threading unit Chip conveyor 6-position bar loader Voltage: 400 V The orange transport rack for long stock is included in the offer. The scissor lift table is not part of this auction but can be purchased from us separately. Gruse ELS 2-13-9 hydraulic scissor lift table "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!