Used Axa Vhc for sale (37)

Condition: used, Year of construction: 2003, CNC Universal Machining Center Manufacturer: AXA Model: VPC 40 U Year of manufacture: 2003 Rsdpfx Aewwt Nmjazjn CNC control: Heidenhain TNC 430 Travel (X/Y/Z): 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 t.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 87342, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, total length: 9,000 mm, table width: 2,000 mm, total width: 4,000 mm, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, rapid traverse Y-axis: 2,000 m/min, type of input current: three-phase, overall weight: 55,000 kg, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, input voltage: 400 V, coolant supply: 20 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Swivel Head 2-axis swivel head with A-axis ±90° (180°) and B-axis 360°. Version with Hirth gearing and hydraulic clamping. Rjdpfxsycw D Rs Aazsn Spindle / Drive AC hollow-shaft spindle motor, 25 kW at 100% duty cycle, 40 kW at 40% duty cycle. Speed up to 10,000 rpm, tool interface SK40. Tool Changer Chain magazine with 22 tool stations. Equipment Chip conveyor available.

Condition: good (used), Manufacturer: AXA Type: HFB 600 Rjdpfjt Tdp Tex Aazen Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: new, AXA 360° swivel cantilever crane Max capacity : Kg 500. Max height : mm 2804. Max overhang : mm 1360. Easily maneuverable due to 360° rotation and high load capacity pivoting wheels with bumper supports and parking brakes. Due to the frontal footprint of only 995mm, it can be used in aisles and confined spaces. The lifting arm is extendable in 4 different positions. Rodjgypgdjpfx Aazsn

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Redpfxjfh R N Ds Aazjn Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Redpfx Aaorvz A Sjzjn Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200

Condition: used, Quick change tool post, tool holder head, quick change tool post, quick change boring tool post, quick change boring bar post, quick change turning tool post -Manufacturer: AXA, quick-change tool holder Multifix D1H 63180 -Shot dimensions: see photos Rsdpfohpu Uqex Aazjn -Clamping length: 180 mm -Dimensions: 180/95/H185 mm -Weight: 8.3kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm Rsdpfx Aedpyzreazjn -Weight: 32 kg

Year of construction: 2023, condition: new, AXA MOVING CYLINDER ELECTRO-HYDRAULIC PRESS. 150-ton power. Automatic double speed with rapid. Moving cylinder stroke 816 mm transverse. Internal clearance from shoulder to shoulder mm 1500 Rod stroke mm 300 GALTECH distributors. - 2MP block. - No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated Rsdpolruhdsfx Aazon at 20 bar) and one with adjustable pressure with handwheel to set the required power. - Pressure relief valve with mechanical lock to prevent overpressure. - Standard pressure gauge to display power output. - INTECH electrical panel certified according to current regulations and with independent CE marking.

Condition: good (used), Year of construction: 1999, For sale is a horizontal machining center from Axa of the Vario type with 2 milling tables. The machine is in good condition and has done little "heavy machining" (was mainly used for drilling and thread cutting). Technical data: Year of manufacture 1999 Control: Heidenhain TNC 410 M digital Table dimensions 2030 mm *500 mm Maximum table load (evenly distributed) 800 kg Min. speed 30 1/min Max. speed 10.000 1/min Drill length on X-axis (mechanical feed) 1760 mm Drill length on Y-axis (mechanical feed) 500 mm Drill length Z-axis (mechanical feed) 620 mm Machine dimensions: Height: 3900 mm Length: 2900 mm Width: 3000 mm Weight: 9 tons SCOPE OF DELIVERY/EQUIPMENT 1 spindle version SK 40 DIN 69 871 A 1 switch cabinet (integrated in the rear of the machine) Ball screws: Made by Deutsche Star Central lubrication unit: Bielomatik Hydraulic unit: Hydac RTA 2-300 MK-3 tailstock manually operated Electric handwheel HR 410 Scraper belt conveyor discharge side right Measuring probe TS 630 Rjdpfx Astt Abmeazen WORKPIECE HOLDERS NOT INCLUDED IN THE OFFER Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 4460 mm Measurements depth 2250 mm Measurements height 3550 mm Machine weight 12000 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 5 Movement X-Axis Movement 750 mm X-Axis Rapid Traverse 25 m/min Rsdpfx Aajx D Ivrjzen Y-Axis Movement 500 mm Y-Axis Rapid Traverse 25 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 20 m/min Additional Equipment Incl. swivel/rotary table SRTA 2-300 for 5-axis machining This 5-axis AXA DBZ vertical machining center was manufactured in 2012. It features a Heidenhain iTNC 530 system, a spindle speed of 10,000 rpm, and a tool magazine with 22 positions. The machine includes a swivel/rotary table SRTA 2-300 for 5-axis machining. Consider the opportunity to buy this AXA DBZ vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine Multi-spindle drilling machine -System without control -1x Spindle machining units -2x sleds -Max. feed stroke: 110 mm -Speed: 1400 rpm -Built-in collet: 6 mm -Weight: 350 kg Redpfx Aaeb A I Dxezen

Condition: used, Year of construction: 2003, Technical details: x-travel: 2300 mm y-travel: 1200 mm z-travel: 600 mm turning speeds: 30-10.000 1/min max. torque on the spindle: 254 / 159 Nm control: HEIDENHAIN TNC 430 tool taper: SK 40 tool change unit: 60 Pos. spindle: 40 / 25 kW fixed working table:surface area: 1.100 x 1.100 mm rotary table: 1.100 x 1.100 mm rapid traverse: 30 m/min total power requirement: 69 kVA weight of the machine ca.: 20 t universal machining center with indexing head (2,5°), NC-rotary table, max. table load 1.500kg, internal coolant supply 30 bar, paper filter, el. handwheel, chipconveyor, automatic doors, flush gun, no touch probe available, approx. 81.400 h main swich on approx. 72.200 h control on Rodswltwmspfx Aazsn approx. 26.700 h program running on machine under power , for functional testing *

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes Rjdpexup Iqofx Aazsn 36 tool stations SK40 Pendulum operation with partition wall 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA A-drive RTA 200/300

Year of construction: 2002, condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Späneförderer , Bandfilteranlage Rsdsgb Rq Sspfx Aazsn

Condition: like new (used), Year of construction: 2018, Manufacturer: AXA Type: VCC50 Rjdpeh Eg Ebjfx Aazen Year of manufacture: 2018 read operating hours (h): 6,332, Serial no.: 87844, X travel: 1,350 mm Y travel: 750 mm Z-travel: 850 mm distance table - spindle nose: 180 - 1.030 mm B-axis additional C-axis (conversion to A-axis theoretically possible), rapid traverse (X/Y/Z): 25/25/20 m/min surface of clamping table: 2.050x850 mm max. table load: 800 kg/m² 5 tN tool changer 22-fold tool holder SK 50 max. tool length: 400 mm max. tool weight: 15 kg max. feed force: 9.000 N main spindle: 6.000 rpm spindle arrangement: vertical control SIEMENS 840 D SL full protection cabin with sliding door swivel spindle Chip conveyor NC rotary table RTA4S-630 2 clamping jaws Paper belt filter system oil mist extraction electr. handwheel machine weight: 17.500 kg machine dimensions: 2.600 x 2.400 x 3.100 mm

Condition: used, Year of construction: 1993, operating hours: 23,927 h, functionality: fully functional, machine/vehicle number: 85280, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 350 mm, overall weight: 23,000 kg, spindle mount: MK 4, Control: Siemens Sinumerik with magnetic clamping table, dimensions 4,000x1,500 mm, due to insolvency. Can be inspected under power. Rjdpfx Asxk U T Reazen

Condition: new, Year of construction: 2025, functionality: fully functional, The P50MR motorized hydraulic press guarantees high performance and maximum execution precision thanks to the robust structure entirely cut by laser without welding in the points of greatest stress. They are equipped with a 400 [V] 50-60 [Hz] submersible motor control unit, a fast approach and return pump calibrated to 20 [bar] plus an adjustable pressure pump with handwheel to obtain the required power. They are also equipped with a pressure relief valve with mechanical block to prevent overpressure and the pressure gauge (standard) allows to calibrate with extreme precision the power delivered. Redpfxsfvhqge Aazjn Power Ton 50 Inside light shoulders mm 800 Approach speed mm/min 1800 Working speed mm/min 350 Rapid flow rate l/min 26 Flow rate in slow l/min 5 Cylinder stroke mm 300 Cylinder bore mm 135 Stem diameter mm 70 Shank diameter mm M30 Tank capacity 50 litres Max. pressure bar 350 Voltage V400 Frequency Hz 50-60 Engine power kW 3 Max. current consumption A 5.5 Weight kg 500 Dimensions 1550 x 800 x 1965 (h)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table length: 2,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 22, Continuous table for longer parts or with partition wall for pendulum machining Redpfx Aaowvit Sszjn TECHNICAL DETAILS Control: Heidenhain TNC 410 X travel: 1,760 mm Y travel: 500 mm Z travel: 600 mm Table size: 2,000 x 500 mm Feed rates: 1 - 10,000 mm/min Rapid traverse: 25/25/20 m/min Spindle speeds: 60 - 6,000 rpm Spindle taper: ISO 40 Tool changer: 22 positions MACHINE DETAILS Total power requirement: 69 kW Machine weight: approx. 10,000 kg Space requirements: approx. 4.2 x 2.3 x 2.7 m EQUIPMENT - Additional clamping tables (3 units)

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, 16-position tool changer, SK 50 tool holder, Spindle speed up to 4,000 rpm, Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, Rodpfsridf Usx Aazsn chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Rittal cooling system,

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available. Redpfx Ajtyymcsazon

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355. Rjdpfx Aet Dpn Neazon

Condition: ready for operation (used), Year of construction: 2007, operating hours: 33,157 h, functionality: fully functional, machine/vehicle number: 86746, travel distance X-axis: 2,360 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 900 mm, controller model: Heidenhain iTNC-530 B, table load: 3,000 kg, rotational speed (max.): 6,000 rpm, Pendulum operation possible TECHNICAL DETAILS X-axis: 2360 mm Y-axis: 1400 mm Z-axis: 900 mm Table clamping area: approx. 2700 x 1100 mm Max. table load: approx. 3000 kg Clamping system: 7 T-slots 14H9 Control: Heidenhain iTNC-530 Spindle system Spindle design: SK50, DIN 69871A Drive power: 56 kW Max. spindle speed: 6000 rpm Number of slots in the tool magazine: 30 MACHINE DETAILS Machine switch-on time: 99,990 h Rodpfx Aaov D Nw Uszen Program run: 33,157 Spindle hours: approx. 28,700 Machine weight: approx. 25 t EQUIPMENT - IKZ with belt filter system (20 bar) - Machine protection system (Brankamp) - Hinged belt chip conveyor - Measuring system (Heidenhain direct) - 3D probe (M&H) - Oil drip tray - Chip flushing gun Any visible vices, tool holders and jaw chucks are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 500 mm, table length: 100 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No minimum price – guaranteed sale to the highest bid! TECHNICAL DETAILS   X-axis travel: 2x 750 mm   Y-axis travel: 500 mm   Z-axis travel: 600 mm   Number of processing axes: 3   Simultaneous CNC axes: 3   Control: HEIDENHAIN ITNC 530C   Table width: 500 mm   Table length: 1,000 mm   Workpiece weight (max.): 800 kg   Max. spindle speed: 10,000 rpm   Tool holder: ISO SK 40   Number of tool positions: 22   MACHINE DETAILS   Total height: 2,800 mm   Total weight: 8,000 kg   Required space length: 6,000 mm   Redpewx Nwcofx Aazsn Required space width: 4,500 mm   EQUIPMENT   - Design: moving column   - Various tool holders   - Each side with 3R clamping system   - Work area lamp