Used Axa Vsc 1 for sale (33)

Condition: good (used), Manufacturer: AXA Type: HFB 600 Ihsdjt Tdp Tspfx Abcew Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 850 mm, Travel Paths X-axis: 1760 mm Y-axis: 600 mm Z-axis: 850 mm Vertical distance table – spindle nose: 0 – 820 mm Horizontal distance table – spindle nose: 180 – 1030 mm Spindle & Drives Spindle speed range: 30–12000 rpm Swivel head B-axis: interpolating B-axis travel range: -100 to 100 Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Rotary Table RTA 4-TF-630 Table diameter (vertical rotary axis): 630 mm Weight: 595 kg Tool Changer Tool holder: HSK A 63 Tool pockets: 42 Ihedpoydmprefx Abcow Machine Dimensions Length / width / height: 6850 / 3450 / 3100 mm Weight: 19 t Accessories: – Documentation – Measuring probe

Condition: used, Year of construction: 2003, Technical details: x-travel: 2300 mm y-travel: 1200 mm z-travel: 600 mm turning speeds: 30-10.000 1/min max. torque on the spindle: 254 / 159 Nm control: HEIDENHAIN TNC 430 tool taper: SK 40 tool change unit: 60 Pos. spindle: 40 / 25 kW fixed working table:surface area: 1.100 x 1.100 mm rotary table: 1.100 x 1.100 mm rapid traverse: 30 m/min total power requirement: 69 kVA weight of the machine ca.: 20 t universal machining center with indexing head (2,5°), NC-rotary table, max. table load 1.500kg, internal coolant supply 30 bar, paper filter, el. handwheel, chipconveyor, Ijdswltwmspfx Abcshw automatic doors, flush gun, no touch probe available, approx. 81.400 h main swich on approx. 72.200 h control on approx. 26.700 h program running on machine under power , for functional testing *

Condition: new, Year of construction: 2025, functionality: fully functional, The P50MR motorized hydraulic press guarantees high performance and maximum execution precision thanks to the robust structure entirely cut by laser without welding in the points of greatest stress. They are equipped with a 400 [V] 50-60 [Hz] submersible motor control unit, a fast approach and return pump calibrated to 20 [bar] plus an adjustable pressure pump with handwheel to obtain the required power. They are also equipped with a pressure relief valve with mechanical block to prevent overpressure and the pressure gauge (standard) allows to calibrate with extreme precision the power delivered. Power Ton 50 Inside light shoulders mm 800 Approach speed mm/min 1800 Working speed mm/min 350 Rapid flow rate l/min 26 Flow rate in slow l/min 5 Cylinder stroke mm 300 Cylinder bore mm 135 Stem diameter mm 70 Shank diameter mm M30 Tank capacity 50 litres Max. pressure bar 350 Voltage V400 Frequency Hz 50-60 Engine power kW 3 Max. current consumption A 5.5 Isdjfvhqgspfx Abcshw Weight kg 500 Dimensions 1550 x 800 x 1965 (h)

Condition: good (used), Year of construction: 2006, machine/vehicle number: 86684, functionality: fully functional, operating hours: 51,929 h, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, total height: 3,210 mm, total length: 10,000 mm, total width: 4,500 mm, controller model: Siemens 840d + Shopmill, rotational speed (max.): 8,000 rpm, Equipment: chip conveyor, documentation/manual, with cross slide, SK 50, machine has a swivel head, plus Rotary table d= 800mm, traveling column and headstock made of high-quality machine casting, direct measuring systems in the basic axes X/Y/Z, power: 75 KWA, control voltage: 24 V, frequency: 50 Hz, back-up fuse: 16 A maximum, circuit diagram:86684, including: Rotary table, adaptive, diameter 800 mm, coolant pump: with 4 x Grundfos motors, and 1 x Walther Flender motor, extraction unit: type: ESB 300/38.1 with 37 kW, serial number: 6861-001 and Flender motor, cooling system from Rittal, tool magazine with 78 places Ihjdpfxjw A Hnts Abcjw Dismantling by the buyer, on-site support for loading, inspection recommended.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table length: 2,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 22, Continuous table for longer parts or with partition wall for pendulum machining TECHNICAL DETAILS Control: Heidenhain TNC 410 X travel: 1,760 mm Y travel: 500 mm Z travel: 600 mm Table size: 2,000 x 500 mm Feed rates: 1 - 10,000 mm/min Rapid traverse: 25/25/20 m/min Spindle speeds: 60 - 6,000 rpm Spindle taper: ISO 40 Tool changer: 22 positions Iedpfx Abewvit Sscehw MACHINE DETAILS Total power requirement: 69 kW Machine weight: approx. 10,000 kg Space requirements: approx. 4.2 x 2.3 x 2.7 m EQUIPMENT - Additional clamping tables (3 units)

Condition: used, Year of construction: 1993, operating hours: 23,927 h, functionality: fully functional, machine/vehicle number: 85280, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 350 mm, overall weight: 23,000 kg, spindle mount: MK 4, Control: Siemens Sinumerik with magnetic clamping table, dimensions 4,000x1,500 mm, due to insolvency. Can be inspected under power. Ijdpfxjxk U T Rj Abcehw

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 5,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 800 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 6,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, AXA VHC 2 - 5000M Retrofit Siemens 840C SK40 / 36 tools Table 5000x500mm Coolant 700l Good condition. Can be inspected under power with chips. Ihodpfx Abow Tkz Rscsw