Used Bench Lathe for sale (7,510)

Condition: used, Year of construction: 2001, turning diameter 280 mm turning length 400 mm control Fanuc 18 T spindle bore diameter 51 mm number of controlled axis 2 turning speed range 0 - 4000 U/min rapid speed 30 m/min number of tapers in turret head 12 VDI 40 tail stock Ja dimensions 3,9 x 1,6 x 2,1 m weight of the machine ca. 3,9 t power requirement 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm - chip conveyor - oil dust collector Hnsdpfx Asyxr Hgecher

Condition: good (used), Year of construction: 1998, Weiler E30 CNC lathe Dimensions, width: 1200 mm Dimensions, depth: 1800 mm Dimensions, height: 1700 mm Machine weight: 1300 kg Spindle bore: 42 mm Workpiece depth over the bed: 330 mm Multifix holder B installed Hnodozr Uc Uopfx Achsr Fixed steady rest (optional), clamping range: 15-100 mm Traveling steady rest (optional), clamping range: 10-85 mm Collets from 3-28 mm (in 0.5 mm increments) Tailstock with MK3 chuck Drive power 100% / 60% duty cycle: 9/11 kW Max. torque on the spindle: 180 Nm Total speed range: 1-4500 min⁻¹ Feed drive: Three-phase feed drives Feed range, longitudinal: 0-20 mm/rev Cutting speed, longitudinal/facing: 10/7.5/5/3.5 m/min Tailstock quill diameter: 50 mm Quill travel: 110 mm Internal taper of the quill: MK 3 Swinging diameter over the cross slide: 160 mm Bed width: 240 mm Travel of the cross slide: 180 mm Length of the bed slide guide: 395 mm Cross-section of the cutting tool (height/width): 20 x 20 mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing: 70 mm Internal taper of the main spindle: MK 5 Workpiece: Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: 0.125 - 28 mm DP thread range: 1-224 G/" Number of threads max.: 50

Condition: excellent (used), Year of construction: 2010, Spinner Tc400 52mc CNC turning machine Year of manufacture: 2010 Control system: Siemens 840D SolutionLine Turning length: 550 mm Hnedpjzua Etefx Achsr Turning diameter: 280 mm Spindle speed (max.): 5,000 rpm Travel in X-axis: 200 mm Travel in Z-axis: 515 mm Rapid traverse rate X-axis: 15 m/min Rapid traverse rate Z-axis: 24 m/min Overall height: 1,800 mm Overall length: 2,100 mm Overall width: 1,350 mm Quill travel: 500 mm Quill diameter: 60 mm Quill stroke: 125 mm Total weight: 4,000 kg Chuck outer diameter: 225 mm Equipment: Chip conveyor Automatic door

Condition: used, Weinig OptiCut C700 under-table cross-cut saw for the safe and precise cutting of solid timber, particularly hard and heavy timbers with large cross-sections. The machine features a pneumatically guided saw unit, two-hand control and a hold-down device, and is ideally suited for sawmills, timber construction and industrial solid timber processing. Technical data: - Saw blade diameter: 550 mm - Cutting width: 750 mm - Cutting depth: 175 mm Hsdpfx Ajzrywdechsnr - Motor: 5.5 kW

Condition: used, The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Technical data: - Spindle mount: MK 2 Hnsdszrytlepfx Acher - Rated power: 750 W // 400 V // 50 Hz

Condition: used, Schneider SK D 2 twin-spindle table router for the precise machining of solid wood and wood-based materials, featuring two independently operable router spindles. The machine enables efficient working thanks to the rapid changeover between different milling tools without any changeover times. Ideal for a wide range of milling tasks in window, door and furniture manufacturing. Technical data: - Motor, each: 4.5 kW - Spindle diameter: 30 mm - Spindle centre distance: 600 mm - Speed settings: 3000/4000/5000/6000/8000/10000 - D-89440 Lutzingen, Tel. , Fax: , April 2015, asking price €500 - D-89440 Lutzingen, Tel. , Fax: , May 2015, cost price €1,000 Hnodpezryrzjfx Achjr

Condition: used, Second-hand HAPFO AP 5000/ME copy lathe for professional use in woodworking. The machine is designed for copy turning of workpieces and is suitable for typical turning and shaping work on wood. Technical data: - Centre-to-centre distance: 1,300 mm Hnedpfx Acozrx Sajher - Centre height: 250 mm - Motor: 1.4 kW

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 Hsdpfx Aozr Uvhechenr - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: good (used), Year of construction: 2001, CNC lathe Daewoo Puma 230 SA – Year of manufacture 2001 Controlled axes: 3 (X – Z – B) Numerical control: Fanuc Series 18-T Max. turning diameter over bed: 510 mm Max. turning diameter: 350 mm Max. turning length: 548 mm Bar capacity: Ø 65 mm Spindle mounting: ASA A2-6" Chuck: 2 x collet chucks Spindle speed: 45 – 4,500 rpm Spindle motor power: 15 kW X-axis travel: 205 mm Z-axis travel: 580 mm Turret: 12 positions Live tooling Chip conveyor: included Bar loader, 3-meter bar capacity Hnedezr Hfnspfx Achor Machine weight: 4,240 kg

Condition: good (used), Year of construction: 2007, CNC - lathe machine Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year: 2007 SPECIFICATIONS Max. turning length: 1.055 mm Hodpfx Ajzinn Eechsnr Turningdiameter: 120 mm Max. swing over bed: 285 mm Rapid motion: (X/Z): 20 m/min Main Spindle Max. revolution: 3.500 rpm Spindle power: 7,5 / 5,5 kW Bar capacity: 43 mm Spindle nose: A2-6 Amount of turrets: 2 Tool capacity: 6 + 6 Tool: Capto Tailstock Quill diameter: 85 mm Quill: MK 4 quill range: 70 mm Tailstock cross travel: 520 mm Steady rest: hydraulisch Steady rest: SMW SLU-1-Z Equipment Chip conveyor Cooling pumps Tool setter

Condition: used, Year of construction: 1986, taper MK 1 weight of the machine ca. 69 kg Hsdjztfymopfx Achenr

Condition: used, Year of construction: 1954, 530 mm serial number 13436 Hodpfxsztfygo Achjnr weight of the machine ca. 1,4 t

Condition: used, Year of construction: 1996, turning diameter over bed Ø16 mm mm weight of the machine ca. 2,3 t Hsdeztfw Eepfx Achonr dimensions of the machine ca. 2045 x 900 x 1685 m

Condition: used, Year of construction: 1980, centre distance 1500 mm Hodpfx Acsztfu Rehsnr 210 serial number 1289 multifix ja ja weight 1,45 t

Condition: good (used), Year of construction: 2011, functionality: fully functional, Control: Siemens 840D Spindle bore: 65 mm Speed: 4,000 rpm Tool holder: VDI 30 Main and counter spindle with C axis TOOL CARRIER I (XZ) Technology: Cross slide (3x) Hodey Rr U Uopfx Achenr Travel: X= 70, Z= 115 mm Tool Carrier II (X/Z) Turret with 7 stations and subspindle All stations driven (3,000 rpm) Travel: X= 160, Z= 450 mm Tool Carrier III Turret with 8 stations Travel: X= 150, Z= 200 mm Tool Carrier IV (rear side) Turret with 8 stations 3 tool holders for rear side EQUIPMENT - Chip conveyor - Bar feeder IEMCA MASTER 80/33 HF

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm Hnodsydaadspfx Achor X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: used, Lathe chucks and holders (VDI 30/40/50) from PLN 5/piece on request Hnjdpey H Ezgjfx Achsr

Condition: used, Year of construction: 1973, turning diameter over bed 630-640 mm turning diameter over slide rest ca 380 mm turning length ca 2000-4000 mm total power requirement 15 kW Hedpfxsztfwrj Achsnr weight of the machine ca. 7-8 t

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; ± 115° ; 8000 rpm; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: -20+50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW Hnsdpozqwf Asfx Achsr TOOL MAGAZINE: CHAIN-TYPE ; 40 POS HIGH PRESSURE COOLANT: 25 Bar CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Year of construction: 2016, condition: ready for operation (used), - USED - TEACH-IN LATHE CENTRE HEIGHT: 180 mm DISTANCE BETWEEN CENTRES: 1000 mm MAX TURNING DIAMETER OVER BED: 360 mm MAX TURNING DIAMETER OVER CARRIAGE: 335 mm BAR CAPACITY: 42 mm BED WIDTH: 250 mm SPINDLE: 4000 rpm; 5,5 kW; CAM LOCK 5" ; 200 mm RAPID FEEDS X-Z: 10 - 10 m/min TAILSTOCK TAPER: CM 3 QUILL DIAMETER: 48 mm QUILL TRAVEL: 140 mm CONTROL UNIT: FANUC Series 21i-T WEIGHT: 1490 Kg OVERALL DIMENSIONS: 2520 x 1170 x 1820 mm ACCESSORIES: STEADY REST ; Hodpfxozqwgas Achsnr RS 232 SERIAL PORT NOTE: COROMAT CAPTO TURRET HEAD

Condition: excellent (used), Year of construction: 2007, Please read the technical specifications completely. If this machine is of interest to you as a potential investment, we kindly request that you provide your complete contact information, including a correct phone number and email address, so that we can prepare a quotation. !!! THIS MACHINE IS CURRENTLY UNDERGOING RECONDITIONING !!! THE IMAGES DO NOT DEPICT THE MACHINE BEING OFFERED BUT SHOW A RECENTLY RECONDITIONED MACHINE WITH A SHORTER TURNING LENGTH !!! We are offering an exceptionally good precision lathe. This machine is likely the best German lathe ever built in its class. BOHEHRINGER precision lathe, model DUE 560 Year of manufacture: 2007, including CE marking and central lubrication Center height: 280 mm Swinging diameter over bed: 560 mm Swinging diameter over cross slide: 315 mm Distance between centers: approx. 2,000 mm Bar capacity: 62 mm Spindle head: DIN 55027, size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 speeds: 11.2 – 2,240 rpm 60 cross-feed steps: 0.03 – 28 mm/rev 60 longitudinal feed steps: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Tailstock taper: MK 5 Footprint: L x W approx. 4,30 x 1,525 mm Weight: approx. 4,600 kg Accessories: - 3-axis digital display HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip guard back panel - 3-jaw chuck T 250 mm incl. various jaws - Roller conveyor cover for lead screw support to bed - Machine light - Multifix C + 3 tool holders - Operating manual - Wiring diagram - Rapid traverse in longitudinal and cross slides Condition: The machine is in very good technical and optical condition. Hnedpfxow Rdthj Acher Backlash in the cross slide approx. 0.2 mm and in the top slide approx. 0.15 mm Spindle taper runout approx. 0.006 mm Geometry of the machine bed: deviation approx. 0.01 mm over approx. 750 mm of bed length (measured on the flat guide with a dial gauge towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New scrapers - Replacement of various wear parts - Complete repainting of the machine and technical functional check Available from approx. the end of September 2026 Price net, ex works. Delivery with our own truck can be offered for an additional charge.

Condition: used, Year of construction: 2010, bar material dia. 20 mm spindle passage 24 mm turning length 350 mm turning speeds 10.000 U/min Control CNC Siemens 840Di/Yaskawa c-axis 0,01° ° gripping station 20 mm c-axis 0,01° ° speeds 10.000 U/min rapid traverse 20 m/min turret (x-stations) 3 x 8 + (3x Y-Achse) total power requirement 5,5 kW Hnjdpfjzrh Ecex Acher weight of the machine ca. 4.850 t dimensions of the machine ca. 3,2 x 1,75 x 1,9 +FMB m CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB.

Condition: good (used), Approx. 15 units of 5-section wardrobe with bench, C+P – used: Price per unit: €500 (net), disassembled, packed, and loaded at the location! Hnjdpezqzplofx Achor Manufacturer: C+P Möbelsysteme Type: S 3000 Evolo Year of manufacture: unknown Dimensions: H 1850 x W 1480 x D 500/815 mm with 150 mm high feet and pre-assembled bench, bench slats made of beech, with integrated height adjustment, 5 compartments, compartment width 300 mm, 5 shortened doors, suspension on pivot bolts, safety swivel lock for padlock with lock protection. Condition: good Available: immediately Location: Leipzig

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: X4S405, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, turning diameter: 554 mm, spindle bore: 104 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 1 rpm, travel distance Z-axis: 2,000 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,000 rpm, total height: 1,750 mm, total length: 4,100 mm, total width: 2,000 mm, type of input current: three-phase, overall weight: 3,600 kg, Harrison Alpha 1550 XS CNC / Manual Lathe Model: Alpha 1550 XS Year: 2017 Control: Fanuc Oi-TF Hnedpfjzux S Esx Achjr Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing In Gap: 830mm Distance Between Centres: 2000mm Spindle Bore: 104mm Spindle Speeds: 1-2000 RPM Machine with: 3 Jaw Chuck Quick Change Toolpost with Holders Fixed Steady Dimensions: 4100 x 2000 x 1750mm Weight: 3600Kgs

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: EK01, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 600 mm, spindle bore: 83 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,800 mm, total length: 4,500 mm, total width: 2,300 mm, quill diameter: 80 mm, quill stroke: 200 mm, workpiece weight (max.): 1,800 kg, type of input current: AC, torque: 1,500 Nm, overall weight: 4,500 kg, swing diameter over bed slide: 570 mm, spindle nose: DIN55027 Größe 8, Equipment: documentation/manual, Cycle control: - Sinumerik 810D with Weiler software "D3" - 3-jaw chuck: Ø315 - 4-position tool holder Parat: Size 3 - Various tool holders (without tools) are included - Coolant level 1: 20 l/min at 2 bar - Coolant level 2: 30 l/min at 10 bar - Chip conveyor with discharge height of 1250 mm - 3 steady rests Tailstock - Arbor diameter: Ø80 mm - Arbor travel: 200 mm - Internal taper of the arbor: MK5 Hnedpfxozumfao Achjr Application area: The machine was used in our production for the machining of various materials. These include various grades of steel, stainless steel, brass, and aluminum. The machine is suitable for both single-part and small-series production and was used in single-shift production. General information: The machine is being sold due to the purchase of a new machine. It is currently still in our ongoing production and can be inspected and tested at any time while powered and in operation. The machine bed shows signs of wear and tear due to age and use. For the highest precision requirements, we recommend an overhaul of the bed guides. However, the machine is still ready for use and productive.