Used Bending Device for sale (15,445)

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ Lasdocnw T Ispfx Aabjh High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: new, bending length: 1050sheet thickness: 1upper roll diameter: 56 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover Lasdpod Ab Uyofx Aabjh - Hardened rolls EURO 336,-- We have many references!

Condition: excellent (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table Laedpfx Asw Nygueabeh -Welding rotating device: pivoting with forming gas line in the center, foot switch -Control: Ess Type PS3E -Turntable: Ø 450 mm -Holder: four-jaw chuck Ø 400 mm -Spindle bore: Ø 62 mm -Dimensions: 780/600/H910 mm -Weight: 190 kg

Condition: used, Year of construction: 2006, pipe diameter (max.): 35 mm, bending angle (max.): 150 °, total length: 3,000 mm, input voltage: 380 V, wall thickness: 3 mm, 2006 wafios BER35 Ljdjvftpdepfx Aabsah

Condition: used, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21130 Laodpfxsw Rah Is Aabsh Specifications: Year of manufacture: 1999 Capacity: 13 t/m Crane diagram Grab included New control console Very little use Description: Palfinger 13 t/m crane from 1999.Comes with grab. Equipped with a new control console and has seen very little use.Has been in storage for several years, so some refurbishment should be expected.Ready for delivery. Own weight: 111 Model: PK 13000

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: M961316, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Herber, controller model: CNC 4, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending angle (max.): 190 °, bending radius (max.): 120 mm, bending radius (min.): 15 mm, working width: 3,000 mm, number of axes: 3, working height: 750 mm, table length: 4,500 mm, table width: 1,350 mm, table height: 750 mm, overall weight: 1,300 kg, input voltage: 400 V, input current: 16 A, input frequency: 60 Hz, type of input current: AC, operating pressure: 120 bar, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, The machine is in very good condition and is serviced regularly. Lasdow Snm Iopfx Aabjh

Condition: excellent (used), Year of construction: 1998, Used Scheppach RG 4000 dust extractor - dust-tested Technical specifications Hose length: 2500 mm Hose connection diameter: 100 mm Motor power: 1.5 kW, 50 Hz / 400 volts Ljdjwb Hqxepfx Aabeah Mobile Extraction drum Availability: Immediately Storage location: 54634 Bitburg

Condition: ready for operation (used), Elgo CNC controlled machine, very easy and user-friendly max tube cap: dia 76 mm x 4 mm thickness max square tube: 70 x 70 mm max radius: 600 bending angle: 180° Standard tooling 3D Special tooling on request Lajdpfx Asxpghqsabjh Length: 1200 mm Width: 800 mm Height: 1300 mm

Condition: new, sheet thickness: 45bending length: 2600upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Laodpfsd Ab Rhex Aabsh Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Year of construction: 2025, condition: new, The universal assembly and adjustment device (HSK 63) for securely clamping all types of aggregates outside the machine—regardless of the design and machine interface. In addition to maintenance work on the aggregate, shank tools or complete tool sets can be reliably mounted and set up, whether in the aggregate itself, in tool holders, or on milling arbors—quickly, precisely, and safely. Laodjxmb Nwjpfx Aabjh Thanks to compatibility with all standard machine interfaces, the device can be used flexibly, independent of the position and number of locking or support pins on the aggregate. Even tool holders with nesting turbines fit without issue. Whether it’s angle adjustments on the swivel unit, adjusting tool positions on the tracing aggregate, or tool changes on a multi-spindle drilling head—our assembly and adjustment device is THE essential tool for every workshop with a CNC machine. - Simple handling of aggregates of various designs - Suitable for all common machine interfaces - Safe clamping and alignment of tools - Universal use in assembly, service, and production - Robust construction for permanent use Availability: immediately from stock Warehouse location: Flörsheim

Condition: used, Year of construction: 2016, Serial number: 50xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18254 Lajdpfx Aasvg Nx Dsbeh Description: Solid Gantry crane from 2016 , previously used in railway projects.Equipped with four hooks , each with a lifting capacity of 10 tons , and designed for precise and heavy handling. The crane is delivered fully loaded on a truck , ready for transport.Shipping costs apply.Ready for delivery at short notice. Own weight: 115000

Condition: excellent (used), Year of construction: 1976, centre height 76 mm Lodpfju Twcljx Aabjah centre distance 190 mm spindle bore 21 mm taper MK 3 weight of the machine ca. 40 kg dimensions of the machine ca. 720 x 210 x 215 mm

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Lajdscnw U Depfx Aabeh Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Max bendingradius: 180° Lodpfxexcqi Es Aabsah

Condition: new, bending length: 2050sheet thickness: 3upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.260,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 1.136,-- - Special voltage EURO 480,-- - Material feeding table Ledpfx Ajd Ab N Asabeah - Lower roll is powered by electric motor We have many references!

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion. Lodpfeu Ailgex Aabjah

Condition: used, Year of construction: 2016, Serial number: 50xxxx Please contact ATS Norway for more information Lasdpfevg Rkhsx Aaboh Please provide reference number upon request: 18255 Specifications Gantry crane: Model year: 2016 Type: Gantry crane for railway Rail type: A100 Height to main hook: 11.9 metres Lifting capacity: 4 x 10 tons Total weight: approximately 131,865 kg Span length: 5.5 + 31 + 8 meters Delivery: Ready for delivery at short notice Description: Powerful Gantry crane from 2016 , previously used in a railway context, for sale.The crane has four hooks with a capacity of 10 tons each , and is ideal for heavy lifting and precise handling of large items. The crane is delivered fully loaded on a truck , ready for transport. Shipping costs are additional.Can be delivered quickly by arrangement. Total Weight: 131865

Condition: as good as new (ex-display), centre height 130 mm Laodpfsuvd Axex Aabsh spindle bore 18 mm ratio 40:1 swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 35 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, Description: Laedpfx Aaocqy I Sebjh IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: good (used), Year of construction: 2019, Serial no.: 8.851.053, milling unit, material thickness 2 - 6 mm, speed 12,000 rpm, 10 pressure rollers, model Fresatrice Pigatrice Alu Bender, 8 ball roller tables, each approx. 1,900 x 900 mm, aluminium Lasdpfxoxl At Is Aaboh

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, bending angle (max.): 190 °, bending radius (max.): 700 mm, bending radius (min.): 80 mm, overall weight: 32,000 kg, total width: 2,700 mm, total height: 2,450 mm, Tube diameter: 168.3 x 11 mm Tube insertion length: 6000 mm Max. bending radius: 700 mm Control system: Siemens 840 D Min. bending radius: 80 mm Max. bending angle +/-: 190° Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Lodpfx Aajxqa Rusbsah Tube Ø 48.3 mm; radius 105 mm Tube Ø 60.3 mm; radius 120 mm Tube Ø 63.5 mm; radius 150 mm Tube Ø 76.1 mm; radius 190 mm Tube Ø 88.9 mm; radius 222 mm Tube Ø 114.3 mm; radius 285 mm Tube Ø 139.7 mm; radius 350 mm Tube Ø 141.3 mm; radius 700 mm Tube Ø 168.3 mm; radius 420 mm There were a few mandrels with direct engravings indicating their specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following mandrel outer diameters were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has an estimated value of approx. €150,000.

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg Lasdpfx Aajxmirtjbjh

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, input voltage: 400 V, Equipment: documentation/manual, LiSEC, BSV-45NK, PM-45/6 Autom. Frame Bending Machine BSV-45NK + 6-slot Profile Magazine PM-45/6 Processing of aluminum, steel, stainless steel and plastic profiles. Lasdpfsxpvutjx Aabeh Printer and bending tools included. Connection: 3/N/PE-50 Hz, 400V, 4,58 kVA | Year: 2012. In good technical condition. Disassembled and ready for loading. Available: NOW

Condition: used, Type: Struers Labotom-3 with Cooli-1 Cooling System Struers Labotom-3 with Cooli-1 Cooling – Complete Cut-off Saw System Description For sale is a complete Struers cutting system, consisting of: - Struers Labotom-3 cut-off machine (Type 05326146) - Struers Cooli-1 cooling and control unit (Type 05761116) Ideal for precise wet cutting of metallic, ceramic, and other materials in laboratories and materials testing. Laodpfx Ajxmh Tcoabsh Technical Data – Struers Labotom-3 (05326146) Feature / Value Motor type / Power: Three-phase motor, 3.2 kW (at 50 Hz) / 3.0 kW (at 60 Hz) Speed: approx. 2,845 rpm (50 Hz) / 3,450 rpm (60 Hz) Cutting disc: Ø 250 mm × 1–1.5 mm × 32 mm (bore) Cutting capacity: up to approx. Ø 90 mm (depending on material) Working table: 200 × 215 mm with three 10 mm T-slots Safety features: Lid interlock, automatic shut-off when opened, thermal protection Noise level: approx. 64 dB(A) in idle mode Connection: 3-phase 400 V / 50 Hz Dimensions (W × D × H): approx. 651 × 645 × 410 mm Weight: approx. 80 kg Technical Data – Struers Cooli-1 Cooling & Control Unit (05761116) Feature / Value Function: Control and supply of coolant pump for wet cutting operation Pump capacity (system-dependent): 60–125 L/min at approx. 1 bar Power supply: 1~ 230 V / 50 Hz Dimensions (W × D × H): approx. 226 × 166 × 128 mm Compatibility: specifically designed for Labotom-3, also compatible with Secotom series Important note: "The table shown in the photos is not included in the scope of sale." Scope of delivery - 1 × Struers Labotom-3 cut-off machine (Type 05326146) - 1 × Struers Cooli-1 cooling & control unit (Type 05761116) - Connecting cables & accessories (as shown in the photos) Shipping / Collection Total weight: approx. 85–90 kg Shipping: via freight forwarder on pallet (possible by arrangement) Collection: preferred, by appointment Location: Borken/Westf. Condition: used (Specifications and technical data are subject to change and may contain errors!) For further questions, please feel free to contact us by telephone.

Condition: good (used), Year of construction: 2001, Pipe insertion length max 4500 mm - electronic 1-axis control - 2-axis measuring system - electronic display of the twist - electronic display of the longitudinal position - twist angle unit with stops Laedpfjxqavqex Aabsh - early mandrel retraction - automatic mandrel lubrication with micro-oil dosing Accessories: - incl. bending tool 21.3 / 26.9 / 33.7 / 42.4 / 48.3 / 60.3 / 76.1 mm x 2 D - incl. various mandrels