Used Bending Device for sale (15,274)

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1300 mm Hfedpfx Aex D Efqeh Djr Measurements depth 2450 mm Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), I am selling in very good condition, Kroeplin D450. Hjdpfx Aheuhh Ubo Dofr

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Hedpfxoc Ux Tmo Ah Dofr Separate electric and command panel (unique with QZ0170A) 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: as good as new (ex-display), Year of construction: 2024, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm bending speed 5.3 m/min engine output 2.2 kW weight 1360 kg range L-W-H 2320 x 900 x 1200 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers Hfodsxaaa Uspfx Ah Der - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: good (used), Year of construction: 2018, Used horizontal bending machine from Simasv Hfedpsx Hihkofx Ah Djr Type T22 Normale Capacity: 22 tons Includes side stop and various bending tools

Condition: used, Year of construction: 1991, table diameter 355 mm Ø 850 mm table load 0,6 t weight of the machine ca. 0,4 t dimensions of the machine ca. 0,6x0,6x0,6 m Hedpfx Aovn Un Hsh Dofr - automatic reversing device mit tailstock and own control. - extension of 150 mm center for center height 430 mm

Year of construction: 1999, condition: used, chuck 380 mm Vierte Achse Hfsdpfx Aox Edwnsh Dsr weight of the machine ca. 280 kg

Condition: used, machine/vehicle number: 007999, Max. panel width: 1200 mm Max. panel length: 2600 mm Rotation system: double cone Rotation direction: from transverse to long Hsdpfew Idaisx Ah Djfr

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Hfodpfx Aoc Ux Tlsh Dor Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 64,000 h, machine/vehicle number: 20306061, working width: 3,110 mm, stroke length: 200 mm, throat depth: 415 mm, distance between stands: 2,700 mm, pressing force: 100 t, Amada Astro II 100 NT bending cell. Includes loading robot, bending robot, repositioning device with extra support, loading table, conveyor for unloading pallets (currently disconnected), safety fence. Comes with multiple loading and bending grippers, both clamp and vacuum type. Worksheet loading both as stack or vertical loading unit. Bending force: 980kN Table length: 3110 mm Hsdewakicopfx Ah Djfr Stroke: 200 mm Open height: 500 mm Worksheet thickness min: 0.6 mm Worksheet dimensions min: 150 x 150 mm Worksheet dimensions max: 800 x 1000 mm/ 300 x 1800 mm Worksheet mass max: 20 kg (including bending robot gripper/ loading robot gripper) Serviced by local Amada representative.

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm Hedpfsfg Th Asx Ah Djfr -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: used, length 1000 mm width 570 mm height 1200 mm Hedpfsh Ig Tpex Ah Djfr weight of the machine ca. 0,4 t dimensions of the machine ca. 1,x0,6x1,2 m used angle plate in good condition with several bores for clamping.

Condition: used, machine/vehicle number: 006082, Max. panel width: 1300 mm Max. panel length: 3000 mm Hedpfx Aswaymweh Dsfr Rotation system: double cone Rotation direction: from transverse to long

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3 Hfodpfx Ajd Siydjh Djr

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm Hsdpfxocp Nvys Ah Dsfr -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

Condition: used, Year of construction: 1970, power capacity 0 kW tool adaptor 0 Hjdju Sbfdepfx Ah Dofr total power requirement 0 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm Hfedpfx Ahsb A Nlfj Dsr -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake Hfjdsb A Nlmopfx Ah Dsr -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm Hfsdpeb A Nlrofx Ah Dor -Length: 2400 mm -Weight: 120 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake Hjdpjb A Nlqsfx Ah Djfr -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm Hfjdpfxob A Nlpj Ah Djr -Length: 3250 mm -Weight: 140 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm Hfodpfx Ajb A Nlueh Djr -Weight: 110 kg

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool Angle: Radius 12.5mm -Dimensions: see the drawing in the photos Hjdpfslcfifex Ah Dsfr -Dimension: 22 x 262mm -Length: 750mm -Weight: 32 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straight tool, die tool, folding tool -Tool: from press brake EHT type EHP 11-40 -Dimensions: see drawing in the photos Hfedpfx Aogxnkgeh Dsr -Dimensions: 4050/35/H150 mm -Weight: 104 kg

Condition: used, Bending tool, die, upper blade, upper tool, straightening tool -Handover in its current condition as inspected -Tool for: Press brake -Tool: 88° -Thickness: 25 mm -Total length: 1009 mm -Lengths: 879/130 mm -Total height: 162 mm Hfsdpfx Ajc Sauxoh Der -Weight: 26 kg