Used Bending Device for sale (13,840)

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device Ledpfx Aceyvvrbskeab - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Ledpjyvvpyjfx Ackjab Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm Lsdpfxeyvvnij Acksab roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Year of construction: 2020, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BV200219443, 🔥 Pyrolytic Cleaning of Screws – DEMO Unit | up to Ø70 mm | Fully Automatic | 12 months warranty Efficient and safe solution for removing polymer residues from screws used in extrusion and injection molding – no deformation, no manual cleaning required. Completely made in the European Union. _____ Key Features • Suitable for all thermoplastic materials • Max. screw diameter: Ø70 mm • Vertical process – no screw deformation • Fully automatic operation (no operator required) • Cleaning time: 3–8 hours (depending on contamination) • Process temperature: 400–500 °C • Integrated gas treatment system with water tank and pump _____ Technical Data (Type PC-70) • Max. screw diameter: 70 mm • Max. screw length: 2,450 mm • Max. working height: 3,200 mm • Total power input: 25 kW _____ Ljdpfxey Id Tqo Ackeab Condition • DEMO unit – directly from manufacturer • Excellent condition with full 12 month factory warranty. • Available immediately FCA BOCO price: 27 990,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Colour: Grey Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Moment of resistance [cm³]: 6 - Top roll diameter [mm]: 50 Ljdpfxoypk Ebs Ackeab - Bottom roll diameter [mm]: 50 - Capacity diameter round [mm]: 35 - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1235, controller manufacturer: Germany Beckhoff, working width: 1,200 mm, bending angle (max.): 90 °, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, total length: 1,685 mm, total width: 1,262 mm, type of input current: three-phase, workpiece length (max.): 1,200 mm, workpiece height (max.): 430 mm, nominal power (apparent): 3 kVA, number of spindles: 6, opening width: 400 mm, - Germany Beckhoff System, Closed-loop control, High bending accuracy. - Italy GIVI MEASURE precision linear encoder. -High strength machine body after heat-treated. Lodpfjwfwkqex Ackoab - No need to change bending tool. - The Blank-holder tool can automatically change the length basic on the sheet length. - Multilateral automatic continuous bending. -Automatic programming software can finish all the process - Automatically check and optimize. the process -All servo motor control, fast and energy saving - Automatically control pressing force.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Laodpfx Aexpqy Dscksb Good condition

Condition: used, Swing bending machine Type: Weingarten ALH Condition: Used Technical Data Lajdpfxjy I U U Se Ackob Sheet thickness: 1.25 mm Bending length: approx. 2030 mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1032, warranty duration: 12 months, total width: 2,300 mm, total length: 1,685 mm, bending angle (max.): 90 °, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, nominal power (apparent): 4 kVA, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, type of input current: three-phase, -Complete machine frame processing -Double-cylinder electro-hydraulic synchronous control -A variety of electro-hydraulic CNC systems are optional -Mechanical compensation -Segmented mold -High-precision back gauge structure Laedewfwkwepfx Acksb -Scalable number of axes

Condition: new, functionality: fully functional, Year of construction: 2025, controller manufacturer: Self-developed brand, workpiece length (max.): 2,000 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, machine/vehicle number: 2016, Product Features: The KaFe manual Panel Bender (Bending Center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per cycle. Full servo control ensures product accuracy within 3 seconds. Lasdpfx Acjxu Uhveksb Product Function: The KaFe Manual Panel Bender (Bending Center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance corporate image in the sheet metal industry.

Condition: good (used), Year of construction: 1985, FOR SALE: Lodpfx Aoy Shgpeckeab Automatic Stamping and Bending Machine BIHLER RM-30 High-performance equipment for the automatic production of complex metal parts from wire or strip material. Identification and Brand Brand: BIHLER (Otto Bihler Maschinenfabrik, Germany). Model: RM-30. Year of manufacture: 1985. Machine number: 23589. Technical Specifications (Model RM-30) Maximum strip width: 32 mm. Maximum wire diameter: 3 mm (mild steel). Feed length (standard): Up to 120 mm. Nominal press force: 70 kN (7 tons). Production speed: Adjustable, up to 350 parts/minute (depending on complexity). Number of slides: Up to 5 standard bending units. Equipment and Configuration Control system: Separate control panel with user interface. Kinematics: Radial cam drive for maximum precision and repeatability. Press unit: Integrated for cutting, punching, or marking operations prior to bending. Safety: Machine equipped with protective guards and emergency stop. Advantages Versatility: Enables the production of highly complex parts in a single cycle. Bihler reliability: Renowned worldwide for robust construction and long-lasting mechanical components. Precision: Ideal for the electronics, automotive, and connector industries.

Condition: new, Year of construction: 2025, functionality: fully functional, NEW – PBE Series Automatic Panel Bending Center | 5 models available | Immediate delivery from stock Condition: New, Year of construction: 2025, Functionality: Fully operational TECHNICAL SPECIFICATIONS: Max. bending length: 1,000 mm (PBE-1000) – 3,000 mm (PBE-3000) | Customizable Max. bending width: 1,000 mm (PBE-1000) – 1,400 mm (PBE-1400) | Customizable Max. bending height: 170 mm (all models) | Min. 110 mm for t-1 mm available on request Lajdpfx Asymcvtjckob Minimum workpiece size (all four sides): 110 mm (PBE-1000) / 200 mm (PBE-1400 to PBE-3000) Minimum workpiece size (one side): 100 mm (PBE-1000) / 170 mm (larger models) | Hemming: 130–180 mm Bending angle: ±0–180° (all models) Minimum sheet thickness: 0.35 mm MAX. HOLDING FORCE (Standard / Heavy): PBE-3000: 115 T / 155 T PBE-2500: 80 T / 115 T PBE-2000: 38 T / 53 T PBE-1400: 28 T / 38 T PBE-1000: 20 T MAX. MATERIAL THICKNESS (Standard / Heavy): Material PBE-3000 PBE-2500 PBE-2000 PBE-1400 PBE-1000 Stainless Steel (SS) 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 mm Aluminium (AL) 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 mm Mild Steel (MS) 1.5 / 2 mm 1.5 / 2 mm 1.5 / 2 mm 1.5 / 2 mm 1.5 mm Power supply: 380V 50/60Hz (transformer available as an option) MACHINE FEATURES: • Automatic multi-sided bending – no tool changes required • Universal tooling automatically adjusts to programmed dimensions • Positive and negative bending in a single setup: arcs, hemming, combined angles • Bending speed 0.2 s/bend – 3× faster than conventional CNC press brake • Intelligent CNC control system for consistent, repeatable results • Single setup positioning – first-edge shearing error is controlled • Multiple positioning references selectable according to workpiece geometry • Energy-saving design – reduces labor and tooling costs TYPICAL APPLICATIONS: Fire doors, elevator panels, computer cases and enclosures, furniture, integrated kitchens, HVAC covers, commercial cold chain equipment, lighting, storage shelving, ceiling panels, air purifiers INCLUDED SERVICES: • 12-month warranty • Spare parts availability • Technical support and commissioning • CE documentation available upon request Offered by HawkTech s.r.o. – certified industrial machinery dealer, Czech Republic. Delivery to CZ, SK, and EU. Price on request.

Condition: excellent (used), You are bidding on: a high-quality plate shear and bending brake from a very good and well-known manufacturer – Schechtl. Features of the machine: Plate shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m (blade in top condition, see photos; original lettering still present, which may fade after frequent cutting) Back gauge Light bar with LED for cut line illumination Adjustable front support Bending brake KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot pedal Optional: back gauge or beading tool Attachment rail Round dies and other dies According to §25a UStG The machines are in good used condition and are ready for immediate use; they come from a private collection. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various dies, back gauges – everything related to sheet metal and steel processing, including bending brakes, plate shears, drilling machines, slitting and profiling machines, accessories (beading equipment, round dies for gutter production, back stops, etc.), and other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice according to §25a UStG, which includes the value-added tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and recommended after scheduling an appointment by phone. Ledpfx Acey T H Nxokoab Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Bending brake KS 260504 & HT 260505

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: D5830, operating hours: 381 h, 2016 Rowa Vmax Pharmacy Robot The system is in perfect working order. It has barely been used, as our many different packaging options are not suitable for such a storage system. The system is operational and in top condition with very low mileage. The last service was performed today, and there is no maintenance backlog. Further information available upon request. Lodowccnpspfx Ackjab

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending • Programmable blank holder Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer Lsdsh Dwqhopfx Acksab SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2026, Hydraulic horizontal bending machine Lsdey T Ranepfx Acksab - Model T 200 with stop - feeding machine - stroke length 185 mm - Weight 500 kg Bending capacity up to flat bars ST 37 is 200x12 mm (with appropriate tool) with punch R 5 and die V 100 mm

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm Ledpfsiau Uuex Ackeab wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° total power requirement - 50 kW weight of the machine ca. 6 t

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Ledpfxomqk Tps Ackoab Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Year of construction: 1997, condition: good (used), Machine info: Lasdpfon Ut A Ssx Ackjb EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: 1997

Condition: good (used), Year of construction: 2003, Consist of : 4 x 6000 mm cross chain conveyers, mounted on floor 1 x TRANSLYFT lifting table, twin sissor model, 4000 x 1000 mm, max lifting capacity : 4000 Kg 4 x chain conveyers, 1000 mm, mounted on top of lifting table Lsdoy Tzi Tjpfx Acksab 1 x THOMAS PETTERSSON TP600 vacuum infeed device, mex width between vacuum suction cups : 4000 mm, ( can lift 6000 mm items. 1 x THOMAS PETTERSSON Electric cabinet 1 x driven band conveyer, 8000 mm

Year of construction: 2016, condition: used, Manufacturer: FELSS, Model: CBC, Year of manufacture: 2016, Serial number: 15-5164B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, Maximum tube length: 1,200 mm, 2 CNC bending heads, PC control with touch display, operator console, double-deck feeder system, loading station, robot manufacturer: Yaskawa, type YR-MA1440/MH12-A00, robot controller type DX200, teach-in terminal, small parts feeder with supply hopper, vibration feed bowl, singling station, unloading/alignment station, crate removal conveyor: length 7,000 mm, crate size 350 x 250 x 150 mm, switch/control cabinets, safety fence/Plexiglas enclosure, staging platforms/racks, label printer manufacturer: CAB, model eos 1, barcode scanner manufacturer: Zebra, model Omni tc15. Laedpfeyx Euqox Ackeb

Year of construction: 2019, condition: used, Make: FELSS, Model: CBC, Year: 2019, Serial No.: 18-2112B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, max. tube length 1,200 mm, 2 bending units, PC control with touch display, operator console, double-deck feeding system, loading station, robot, make Yaskawa, type YR-MA1440/MH12-A00, robot controller, type DX200, teach-in terminal, small parts feeding system with loading bunker, vibrating feeder bowl, singling unit, removal/alignment station, box outfeed line L 7,000 mm, box size 350 x 250 x 150 mm, control cabinets, protective fence/plexiglas enclosure, component provision platforms/shelves. Ljdpsyx Ev Uofx Ackeab

Condition: used, Year of construction: 2012, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1057, 2 CNC bending heads, Bending capacity Ø 30 x 2 mm (steel), Bending planes selectable within a total tool height of 138 mm, Travel range X/Y/Z 1,416 x 260 x 1,170 mm, Collet head with feed slide, PLC control Siemens S7-300, Touch display, Loading magazine, 2 robots, make: Motoman, Robot control unit, make: Yasnac, Model: K10, Teach-in terminal MRC, Spray cleaning system, Chamber size 500 x 300 x 1,000 mm, PLC control with operator panel, make: Siemens, Model: SIMATIC Panel, Thermostat, 3 washing chambers, Tube cutting station, make: FZH, year: 2012, serial no.: M99964, Control system, Display make: Siemens, Model: SIMATIC Panel touch. Laodpfxsyx Erio Ackjb

Condition: used, Year of construction: 2010, Manufacturer: ROSENBERGER, Model: RB 20-2 Twister, Year of manufacture: 2010, Serial no. A89, tube diameter 12 mm and tube length 1,700 mm, mainly consisting of: 2 CNC bending heads, bending capacity Ø 20 x 2.0 mm (steel), bending planes freely selectable within 78 mm total tool height, robot, make KUKA, type KR16-2, serial no. 10009498, robot controller KRC2, teach-in terminal, 2x indexing conveyor belts, robot by Motoman, Teach-In Terminal K6, controller by Yasnac, type MRC, safety fence system, electrical/control cabinets, peripheral units, accessories. Ljdsyx Ewrepfx Ackjab

Condition: used, Year of construction: 2012, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1053, 2 CNC bending heads, bending capacity Ø 30 x 2 mm (steel), bending planes freely selectable within 138 mm total tool height, travel path X/Y/Z 1,416 x 260 x 1,170 mm, collet head with feed carriage, PLC control Siemens S7-300, touch display, infeed cycle conveyor, robot, make Motoman, robot controller, type SK16, Teach-In terminal MRC, punching station, make TOX, safety devices, safety fence systems, control cabinets, accessory cabinet with 8 drawers. Lasdpfjyx Etaox Acksb