Used Blow Moulding for sale (2,562)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, working width: 240 mm, spindle diameter: 40 mm, working height: 120 mm, overall weight: 5,050 kg, power of feed motor: 11 W, spindle speed (max.): 8,300 rpm, spindle speed (min.): 8,300 rpm, jointer table length: 2,500 mm, number of spindles: 6, Four side planer SCM TOPSET XL: - working width: 240 [mm] - working height: 120 [mm] - number of spindles: 6 Iodpfeizxf Hjx Ak Aoif - spindle diameter: 40 [mm] - feed speed: 6-60 [m/min] Planer in very good condtion. First owner!

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN Iiedpfx Aezphdtek Asf L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on the thicknesser 250mm - max. thickness of workpiece on the side heads (3-sided) 110mm – from above: - ejectors - toothed infeed shaft - pressure pad - planing shaft - pressure pad - smooth outfeed shaft - pressure pad at the output Iisdpfx Akozu Sgpo Asf – from below: - guide strip - adjustable rollers in the lower bed, 2 pcs – from the rear: - side spindles + pressure pad, 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed settings - electric bed lifting - dust extraction port 2x110mm - overall dimensions (L/W/H) 1650x1500x1210mm - weight 1370kg ADVANTAGES – Polish production – shaft for 4 knives – used planer, very good condition Net price: 23,900 PLN Net price: 5,690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7556 Technical specifications: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 toothed feed rollers, including 2 double rollers - 2 smooth rubber withdrawal rollers – from below: - side pressure before and after the roller in the lower bed - toothed feed roller, rotating, in the lower bed before the first spindle - 2 pneumatic side presses - smooth metal withdrawal roller Iijdpszu R R Hefx Ak Asf - all rollers are pneumatically pressed - length of the feed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the planing thickness - lifting motor 0.75kW - stepless feed speed adjustment on a frequency inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameter of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads – ideal for both wet and dry wood – used machine, in perfect condition Net price: 66900 PLN Net price: 15920 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Industrial blower VOITH FISCHER model VK1-07, year 1979, currently operational. Ijdpfx Akjyn Iuwe Ajif Compact machine suitable for the production of small containers using blow molding process. Equipment has been used in an industrial environment and is available for inspection at the plant in Albacete (Spain). Net price EXW Albacete. Negotiable.

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar Iijdjznd Dyepfx Ak Aof - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 23 m/min, total height: 1,500 mm, total length: 3,200 mm, total width: 1,200 mm, overall weight: 1,200 kg, We offer this edge banding machine for shaped components, VITAP ECLIPSE 2.0, in very good condition, manufactured in 2021. Iodjzuwdgspfx Ak Aoif Rated voltage: 400 V Frequency: 50 Hz Rated power: 9 kW Air pressure: 6 bar Weight: 1200 kg Dimensions (L × W × H): 3200 × 1200 × 1500 mm Thickness of workpieces: 8–60 mm Feed rate: 9–23 m/min Glue tank capacity: 9 kg Edge banding machine VITAP ECLIPSE 2.0 Device type: FD 21 pro Device number: 120019 P Year of manufacture: 2021 Used device, in very good technical condition, used for one project, used sporadically for over a year, hence the decision to sell. We are interested in selling or exchanging it for a panel saw with a cutting width of 4300 mm (with a price adjustment, of course). Due to the project closure, we are offering for sale: Multi-spindle drilling machine FELDER FD 21 Panel saw HOLZMA OPTIMAT HPP 350 Edge banding machine VITAP ECLIPSE 2.0 The device is connected, fully functional, and can be viewed/tested on-site – Kraków, Rybitwy. The device is designed for edge banding narrow side surfaces of furniture components made of particleboard, plywood, and lumber. The VITAP edge banding machine is ideally suited for edge banding from 1-3 mm. Type: Edge banding - Single-sided edge banding machine Component thickness: 3 mm Edge thickness: 60 mm If you have any questions or need additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN Isdsywzv Ispfx Ak Aoif opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: ready for operation (used), Year of construction: 2003, clamping force: 2,750 kN, screw diameter: 60 mm, injection weight: 547 g, Hydraulic injection moulding machine manufactured in 2003. This Engel ES 1050/275 HL-V features a clamping force of 275 t and a maximum platen stroke of 1200 mm. It has a screw diameter of 60 mm and a maximum injection volume of 607 ccm. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 1050/275 HL-V machine we have for sale. Contact us for further details regarding this machine. • Screw diameter: 60 mm • Injection pressure: 1725 bar • Platen dimensions: 1050 x 650 (900) mm • Tie-bar spacing: Tie-bar-less (nemá) • Max. platen stroke: 1200 mm • Min. mold height: 350 mm • Centering ring: 160 mm • Ejector pin length: 330 mm Iisdpfx Akezlrvxo Aef • Ejector pin internal thread: M16 • Core pulls: 2 • Air blow: 1 • Hydraulically operated nozzles: No • Pneumatically operated nozzles: No • Number of hot runners: 8 • Max. injection volume: 607 ccm • Working hours: 60,701.3 h

Condition: not inspected (used), functionality: unexamined, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, Working width: 20 – 230 mm Working height: 8 – 160 mm 7-spindle configuration Feed rate infinitely adjustable: 6 – 36 m/min Spindle motors with 7.5 kW, 11 kW and 18.5 kW power Mechanical brakes on the motors Electrical adjustment options for spindles and feed rate Hardened table insert in front of the first lower spindle Pressure pads and guides for precise workpiece guidance High-quality ball bearings and robust industrial design Iedpfx Akszt Hf Dj Aoif Spindle arrangement: Lower horizontal spindle 7.5 kW Right vertical spindle 7.5 kW Left vertical spindle 11 kW Right vertical spindle 7.5 kW Upper horizontal spindle 18.5 kW Lower horizontal spindle 7.5 kW Universal spindle 7.5 kW

Condition: used, mileage: 5,22,000 km, power: 279 kW (379.33 HP), first registration: 09/2009, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 10x4, wheelbase: 7,730 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: other, total length: 10,000 mm, total width: 2,550 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, = Additional options and accessories = - Aluminum fuel tank Iedezvcr Ejpfx Ak Ajif - Digital tachograph - Air suspension - PTO (Power Take-Off) - Radio/CD player - Sun visor = Further information = Technical information Number of cylinders: 6 Engine displacement: 11,705 cc Axle configuration Axle 1: Tire size: 385/55 R 22.5; Steered; Left tire tread: 35%; Right tire tread: 35%; Suspension: Leaf spring Axle 2: Tire size: 385/55 R 22.5; Steered; Left tire tread: 50%; Right tire tread: 50%; Suspension: Leaf spring Axle 3: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 40%; Left outside tread: 40%; Right inside tread: 40%; Right outside tread: 40%; Reduction: single reduction; Suspension: Air suspension Axle 4: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 30%; Left outside tread: 30%; Right inside tread: 30%; Right outside tread: 30%; Reduction: single reduction; Suspension: Air suspension Axle 5: Tire size: 435/50 R 22.5; Left tire tread: 25%; Right tire tread: 25%; Suspension: Air suspension Weights Unladen weight: 17,860 kg Payload: 32,140 kg Gross vehicle weight: 50,000 kg Condition Damages: none

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Iodpfxjyhbzds Ak Aeif Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm BM Sterling APV, year of manufacture 1998 Iodpfxjzfxwio Ak Aoif Complete control system replacement in 2008 with MACO-sys 6000, performed by Davies-Standard LTD Net price: 45,000 EUR

Condition: used, machine/vehicle number: 11431, Rotor diameter: 450 mm Rotor width: 600 mm Paddle rotor 3×3 rotor knives (offset), 2 rows of stator knives Infeed cross-section approx. 550 x 625 mm Drive motor 30 kW Application: Primarily suitable for shredding hollow blow-moulded bodies and bulky moulded parts such as bottles, canisters, jugs, bowls, baskets, buckets, tubs, etc. Iiedpfx Akeyr Tkre Asf

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Ijdsyzumzjpfx Ak Asif Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: ready for operation (used), Year of construction: 2006, clamping force: 5,750 kN, screw diameter: 80 mm, injection weight: 1,304 g, Hydraulic injection moulding machine manufactured in 2006. This Krauss Maffei KM 575-2700 C2 features a clamping force of 575 t and a screw diameter of 80 mm. It offers a maximum platen stroke of 1750 mm and a minimum mold height of 600 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 575-2700 C2 machine we have for sale. Contact us for further details. • Injection pressure: 1829 bar • Platen dimensions: 1620 x 1470 mm • Tie-bar spacing: 1000 x 880 mm • Max. platen stroke: 1750 mm • Min. mold height: 600 mm • Centering ring: 200 mm • Ejector pin length: 550 mm • Ejector pin internal thread: M16 • Core pulls: 3 • Air blow: 2 • Hydraulically operated nozzles: No • Pneumatically operated nozzles: No Iodpfx Aozlynpjk Aoif • Number of hot runners: 12 • Max. injection volume: 1433 ccm • Sorting flap: No Additional equipment • Conveyor • Manipulator / Robot

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Iodpfxjztzqzs Ak Aoif

Condition: excellent (used), functionality: fully functional, Weinig Hydromat 23 profiling line Kallfass KFP-4000-4 destacker Package length 2500mm Feeding to the profiling machine conveyor Receiver for spacers Weinig Hydromat 23 four-sided planer Number of spindles: 9 Hydraulic feed drive: 60m/min Material conveyor to Weinig EM12 planer Weinig UNISTACK 811 stacking machine Package length: 500 mm to 3100 mm Package height: 1200mm Package width: 1200mm Iijdpezvaw Sefx Ak Aof

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls Iiodpfxeyxdwdo Ak Ajf • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Iedexlzrcjpfx Ak Ajif Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Isdpozt Slpsfx Ak Aoif

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle RoundBottles 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     Iijdpfxevgt Upo Ak Aef BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of workpiece: 200mm - max. height of workpiece: 150mm - number of spindles: 4: 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 150mm, 4kW 3) vertical left: 150mm, 4kW 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm From above: - 6 infeed rollers, toothed, including 2 double rollers - 1 outfeed roller, toothed, rubber From below: - 1 infeed roller, toothed, pulling, swiveling in the lower table - 3 side pressure rollers - 1 outfeed roller, pulling, metal, smooth - all rollers are pneumatically pressed - length of infeed table: 2130mm - table adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor: 1.1kW - stepless feed speed adjustment on inverter - feed motor: 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3550x1750x1800mm - weight: approx. 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Ijdpfx Aezu R N Nok Aeif Net price: 11880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (prices may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: Iedpfswm Iz Njx Ak Asif • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: excellent (used), CATALOGUE NUMBER 7219 TECHNICAL DATA - max. width of the workpiece: 200mm - max. height of the workpiece: 150mm Number of spindles: 4 1) horizontal, lower: 200mm, 5.5kW 2) vertical, right: 150mm, 4kW 3) vertical, left: 150mm, 4kW 4) horizontal, upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm Top: - 6 feed rollers, toothed, including 2 double rollers - 1 feed-out roller, rubber, double Bottom: - feed roller, toothed, helical, located in the lower table - 3 side pressure rollers - feed-out roller, metal, smooth - all rollers are pneumatically pressed - length of the feed table: 2130mm - table adjustable up/down - central lubrication - electrical adjustment of cutting depth - lifting motor: 1.1kW - stepless feed speed adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3650x1750x1800mm - weight: approx. 3000kg ADVANTAGES – 4 heads – ideal for both wet and dry wood – DTR documentation available – used machine, very good condition Net price: 52900 PLN Iodozu R Rmopfx Ak Aeif Net price: 12590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)