Used Broach for sale (209)

Year of construction: 1971, condition: used, General / technical data: Manufacturer: Forst Model: RSIA-20-1320 Year of manufacture: 1971 Weight: 6.000kg Tedpfxslwu Spe Ac Nsf Tractive force: 20t clearing speed: 5m/min return speed: 16m/min maximum stroke: 1320 broaching positions: 3 clamping area: 370 x 620 x 105mm Remark: The machine is under power in our warehouse and can be inspected.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws Tedpfev Rpnmox Ac Njf (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Year of construction: 1968, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Tedpfx Asv Rmvzjc Nof Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Tjdpfjr A Hcbsx Ac Nsf Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Tsdjhpqqujpfx Ac Nsf Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Year of construction: 1982, condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, chip conveyer remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke Tjdpfx Asd I R Ngoc Njf

Year of construction: 1955, condition: used, machine/vehicle number: 1331, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1955 Weight: approx. 2950 KG Machine. No.: 1331 General / technical data: hydraulic horizontal internal broaching machine in a good working condition clearing length: 1500mm turning: 1 piece pulling force: 10000 KG at 3m/min (5000KG at 7m/min) Clamping tool: universal pulling head for flats up to 26mm width Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and oil sump) cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 6200mm x 700mm x 1900mm (without working area) Power supply / connected load: 380Volt 50 HZ / 8 KW hydraulic motor: 7,5 KW Tedpfodbr H Tox Ac Nof Accessories / special equipment: - the machine is equipped with a universal drawing head for flat sheets - the machine has a movable coolant cutting unit for 2 media - the machine has an oil and oil tank with a tool feeder slide Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is very clean in the area of the guides and the cylinder. Broaches and mandrels can be supplied on request. The machine is ready for inspection under power in our warehouse.

Year of construction: 1958, condition: used, machine/vehicle number: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2500 KG General / technical data: used vertical hydraulic indoor rasping machine with 1 rasping point in a working condition tractive force: 6000 KG clearing length: 1000mm diameter of the pulling head: Ø 85 mm passage width between the cylinders: max. 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1000 x 1200 x 2800mm Power supply / connected load: 380Volt 50 HZ / 4KW Accessories / special equipment: The machine is equipped with a workpiece table for 1 rearrangement. The tool clamping system is provided for a spring-mechanical locking (DIN 1415). The machine has an integrated cooling system. There is a double pulling head for 2 flat broaching tools with tool support plate. Tsdpfx Aoda Ugiec Nef Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production use with medium batch sizes. For the use ideally a machine pit or alternatively a platform is needed. Drawing heads are available on request. The machine has no tool feeder. The machine can be inspected in our warehouse under power.

Year of construction: 1962, condition: used, machine/vehicle number: 1790, creator: Karl Klink Model: RW 5 year of construction: 1962 weight: ca. 2500 KG machine. No.:1790 General / technical data: hydraulic horizontal internal broaching machine in a good working condition clearing stroke: 1320mm Todsdl Uzkspfx Ac Njf turning: 1 piece pulling force: 5000 KG at 3m/min (3000KG at 7m/min) Clamping tool: universal drawing head for flat shafts Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and spit trough) cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 4600mm x 600mm x 1900mm (without working area) Power supply: 380Volt / 50 HZ / 15A hydraulic motor: 4 KW Accessories / special equipment: - the machine is equipped with a universal pulling head for flat shafts - Coolant / lubricant system - without tool feeder - short oil and oil sump (approx. 900mm) Remarks: The machine is ideal for the production of keyways. On request broaches and mandrels can be supplied. The machine is ready to run under power in our warehouse.

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / technical data: used vertical hydraulic indoor rasping machine with 3 rasping points in a very good condition tractive force: 25000 KG clearing length: 2000mm wheel positions: 3 pieces Distance between the wheels: 160mm diameter of the drawing heads: 3 x Ø 100mm Clearance width between the cylinders: Nominal size 500mm passage width between the cylinders measured: max. 590mm Cutting speed: hydraulically infinitely variable from 1m/min to max. 10m/min Return speed: hydraulically infinitely variable from 5 to max. 25m/min Space requirement of the machine: (w x d x h) approx. 3400mm x 3400mm x 6900 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 22 KW Accessories / special equipment: The machine is currently without work table. On the machine was a workpiece sliding table mounted with a special workpiece clamping device for external broaching. (The workpiece sliding table is changeable). The tool clamping system is equipped with a hydraulic lock in the draw bridge as well as in the feeder. The machine has a coolant system with integrated chip conveyor. Remarks: Tedpfjdffzfjx Ac Nof The machine is in very good condition and is still in its original paint. It is designed for serial production, for optimal use a foundation (pit) is ideally needed. Drawing heads and needles

Year of construction: 1951, condition: good (used), machine/vehicle number: 1133, horizontal hydraulic broaching machine Karl Klink (our Ref No. WKG 1678) machine type: horizontal internal hydraulic broaching machine manufacturer: Karl Klink type: RW 10 built in: 1951 stroke 1500mm pulling force: 10.000KG Todpjdcdrpsfx Ac Nof working stations: 1PCs drive: hydraulic system equipment: coolant system Optional accessories available on request: Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3.000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine. No.: 1413 General / technical data: used vertical hydraulic indoor rasping machine with up to 3 rasping points in a ready to use condition tractive force: 13000 KG (maximum) room length: 1200mm Raeumstellen: 3 pieces Spacing between the racks: 100mm Diameter of the pulling head: Ø 85mm passage width between the cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Tedjdbmgmepfx Ac Nsf Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1150 x 1500 x 3725mm (tool feeder extended) Power supply / connected load: 380Volt 50HZ / 7,5KW Accessories / special equipment: The drawbridge of the machine has 3 space tool holders, the tool table has 1 space (changeable). The tool clamping system as well as the tool feeder is provided for a spring-mechanical locking (DIN 1415). The machine has an automatic tool feeder, the existing tool feeder is also available for only 1 tool (middle space). The machine has an integrated coolant system for cutting oil. Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production with medium batch sizes. The machine has

Year of construction: 1959, condition: used, gr. tractive force: 16 to. Tjdpfx Aj Rwa Ujc Nof gr. stroke: 1250 mm cutting speed: 5,6 m/min return speed: 30 m/min

Year of construction: 1960, condition: used, max. tractive force: 20.000KG max. stroke: 1250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min max. workpiece Ø: approx. 140 mm max. tool Ø: approx. 50 mm, tool changeover: 2 pieces, The machine is equipped with a 2 station rotary indexing table. The machine is equipped with an automatic tool feeder, and is designed for manual series production. The tool locking in the draw bridge as well as in the tool feeder is spring-mechanical (drawing head DIN 1417). Tsdpfx Acsui Sbs Njf

Year of construction: 1980, condition: used, max. tractive force: 10 to max. stroke: 1250 mm max. cutting speed: 10 m/min Tjdocdtplepfx Ac Njf max. return speed: 27 m/min max. workpiece diameter: 320 mm turning: 3 pieces weight: 4,8 to automatic tool feeder hydraulic drawing head and end piece holder locking device automatic loading device for workpiece diameter up to 100mm magnetic belt conveyor

Year of construction: 1987, condition: used, machine/vehicle number: 34, gr. tractive force: 10 to gr. stroke 1000 mm cutting speed: 7,5 m/min return speed: 24 m/min weight: 6,2 to Tedpond Dmsfx Ac Nef Machine is suitable for tube clearing

Year of construction: 1972, condition: used, max. tractive force: 10 to, max. stroke: 1250 mm Todpjcdtnhofx Ac Nsf max. cutting speed: 10 m/min. max. return speed: 25 m/min. clearing: 3 pieces passage width: 470 mm spacing of the raumstellen: 125 mm table: 400 x 400 mm special equipment: Discharge of spares by permanent magnetic spares conveyor 1 hydraulics, 1 working platform, el. hydr. shaft and end piece holder fixing, automatic loading device

Condition: excellent (used), For sale: Professional dot peen marking machine PRO PEN P5000 (GravoTech Marking SAS), distributed by HAHN+KOLB Gruppe. This is a fully industrial-grade device designed for permanent marking of metal and plastic parts—serial numbers, logos, codes, and production markings. Specifications: • Model: Propen P5000 Pn/d • Year of manufacture: 2010 • Power supply: 100–240 V, 50/60 Hz • Power: 150 W • Operating pressure: 5.5 bar (pneumatic supply) • Manufacturer: GravoTech Marking SAS, France • Operator panel with touchscreen + HP keyboard • Robust worktable with guides. The machine is complete, fully functional, and ready for operation. Ideal for workshops, production plants, tool rooms, and wherever quick and precise permanent marking is required. Very good condition—well-maintained unit with minimal signs of use. Todpfow R Spqox Ac Nof

Condition: new, The 2 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability for a wide range of applications in mechanics and repair shops. With a press force of 10 kN and a throat depth of 145 mm, it is particularly suited for press-fitting and pulling bearings, aligning, and bending tasks. The simple functionality of this press, combined with the included operator manual, makes it an essential tool for any workshop. As a robust offering from KNUTH, the 2 T Workshop Press stands ready for your pressing needs, allowing you to handle tasks with efficiency. Don't hesitate to order online and enhance your toolkit with this reliable Manual Workshop Press today. Tsdeu E I E Rjpfx Ac Njf

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Tsdpfxsxytmhe Ac Njf Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Year of construction: 1989, condition: excellent (used), machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Tsdpjd R Ri Uefx Ac Nef Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€

Condition: good (used), Hello, For sale: Slotting Machine type HOV-2S. The machine is operational and in continuous use; inspection and testing are possible. Todpfx Acexyi Sas Nsf The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact from 7:00 to 16:00.

Condition: new, Year of construction: 2025, One of our best-selling conventional lathes, this lathe can be used for many tasks such as turning internal and external surfaces as well as tapers, polishing, modular and DP threading, drilling and internal broaching. Machine features Lathes from this series can be used for many tasks such as turning internal and external surfaces, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 52 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Machining accuracy: circularity deviation below 0.01 mm, cylindricality deviation no more than 0.02 mm for 200 mm long measurement, perfect surface finish Equipped with a mechanical foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Tedpfxsiz Tf Se Ac Nef Optional VARIO model with a smooth spindle speed adjustment and a digital indicator Technical data Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap bridge 580 mm Turning length in gap bridge 190 mm Centres distance 1000 mm Centres height 205 mm Bed inductively hardened Bed width 250 mm Spindle bore diameter 52 mm Spindle tip D1-6 Spindle mount MK6 Spindle speed (16) 45–1800 rpm Maximum tool dimensions 20 mm×20 mm Longitudinal feed range (17) 0.05–1.7 mm/turn Transverse feed range (17) 0.025 – 0.85 mm/turn Metric thread (42) 0.2–14 mm Inch thread (45) 2–72 T.P.I. Modular thread 0.3–3.5 M.P (18) D.P. thread 8–44 D.P. (21) Tailstock quill diameter 50 mm Tailstock quill extension 120 mm Tailstock quill tip MK 4 Digital readout in 3 axes Main motor power (S1/S6) 2.2/3.3 kW Flood coolant pump power 0.1 kW Dimensions 1940×850×1320 mm Weight 1590 kg Default equipment 200 mm 3-jaw lathe chuck 250 mm 4-jaw lathe chuck 3 axes digital readout Face plate Steady rest Follow rest Spindle reducing sleeve Dead centre Change gears for the swing-frame of the gear train Cooling system Lighting installation Thread indicator (gauge) Lathe equipped with an electromechanical foot brake compliant with EC regulations Chips container Set of handling tools Protective guards compliant with the newest EC regulation User manual EC declaration of conformity Factory new machine under full warranty Factory new machine, under warranty For more information you can visit our web page.

Condition: new, The 1 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability for a wide range of applications in mechanics and repair shops. With a press force of 5 kN and a throat depth of 100 mm, it is particularly suited for press-fitting and pulling bearings, aligning, and bending tasks. The simple functionality of this press, combined with the included operator manual, makes it an essential tool for any workshop. As a product of KNUTH, you can trust in its performance and durability. To enhance your workshop, consider this indispensable Manual Workshop Press and request a quote today to ensure you meet all your pressing needs. Tsdpfxsu E I Ewe Ac Nef

Condition: new, The 3 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability in various mechanics and repair shop applications. With a press force of 15 kN and a throat depth of 155 mm, it is well-equipped for tasks such as press-fitting and pulling bearings, aligning, and bending. The integrated operator manual ensures ease of use, allowing you to maximize the efficiency of the 3 T Workshop Press. With its robust construction and broad application range, this KNUTH press stands as an essential tool for your workshop needs. To elevate your workshop capabilities, consider ordering the 3 T Workshop Press today. Tjdpeuy Iaksfx Ac Nof