Used Broach for sale (214)

Condition: excellent (used), Year of construction: 2000, Arthur Klink RISH 6.3 × 1000 × 400 – Technical Specifications Machine type: horizontal internal broaching machine Manufacturer: Arthur Klink Model: RISH 6.3 × 1000 × 400 Isdpfx Ask S U Hcjabsbc Year of manufacture: 2000 Tractive (broaching) force: 6.3 tonnes (approx. 63 kN) Maximum broaching length (stroke): 1,000 mm Maximum workpiece diameter: approx. 420 mm Table opening bore diameter: approx. 80 mm Broaching speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Overall dimensions (width × depth × height): approx. 5,700 × 600 × 1,900 mm Power supply: 380 V, 50 Hz, total connected power approx. 4 kW Machine weight: approx. 2,300 kg Coolant and lubricant system: integrated coolant/lubricant facility Oil and chip tray length: approx. 2,000 mm

Condition: ready for operation (used), Year of construction: 2001, A horizontal external broaching machine Hoffmann is available. Traction force: 25t, broaching stroke: 4000mm, stroke length: 400mm, broaching speed: 40m/min, return speed: 45m/min, max. operating pressure: 70bar, hydraulic oil volume: 630l, cycle time at 25m/min: approx. 50s, output in continuous operation: approx. 72 parts/h. Machine dimensions X/Y/Z: approx. 10000mm/7700mm/5000mm, weight: approx. 50000kg. Includes workpiece loader and automation, 3-piece tool broaching bar package. Various spare parts (motors, gearboxes, etc.) available on request. Documentation available. An on-site inspection is possible. Iedpfxsxa Ei Is Aabsbc

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg Ibodpfx Aaewki Apsboc

Condition: new, Year of construction: 2019, machine/vehicle number: 3813, overall weight: 600 kg, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, workpiece diameter (max.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Iedpfx Aew Evkijabsbc Machine No.: 3813 Year of manufacture: 2019 Never commissioned Complete documentation Without broaching tools (broaches) Working Area Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal Broaching: Tool feed: manual/automatic Max. workpiece diameter: 300 mm External Broaching: Fixed/movable/rotatable workpiece clamping plate Clamping plate area: 255 mm x 400 mm T-slots: 2 units, 14 mm wide, parallel/perpendicular to the mounting surface of the tool slide Accessories/Special Equipment: Coolant system Broaching tool safety device Machine cover for workspace protection Footprint: 0.72 m x 1.3 m x 2.67 m (LxWxH) Weight: 600 kg Voltage: 400 V Current type: Three-phase Y/Δ 50 Hz Connected load: 12 kVA Max. fuse: 25 A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Broaching Tool Holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½" Please submit inquiries only via email. All information is provided to the best of our knowledge. Subject to errors. This offer is directed exclusively at businesses as defined by § 14 BGB. Sale is made without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the seller's obligations or for any injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the headings "Imprint", "General Terms and Conditions", and "Data Protection".

Condition: used, TECHNICAL DETAILS - Pulling force : 80 [kN] - Max. broaching stroke : 1250 [mm] - Max. feed stroke : 500 [mm] - Spindle lengths : 650 - 1400 [mm] - Table width : 400 [mm] - Broaching speed : 1 - 10 [m/min] - Return stroke speed : 1 - 15 [m/min] Ibodou E U R Topfx Aabsc - Installed power : 25 [kW] - Machine weight : 4300 [kg]

Condition: good (used), Keyway broaching machine FRÖMAG RAPIDA 463 incl. indexing table and additional accessories - Achievable keyway widths: 3 - 63 mm - Maximum keyway length: 600 mm - Indexing table - For bores from 10-500 mm - Feed size: 0.01-0.25 mm - Cutting speed infinitely adjustable: 2-22 m/min - Return speed - constant: 50 m/min Iodpewr T S Dsfx Aabjbc - Load capacity: 3000 kg - Connected load: 4.6 kW - Incl. working platform - Various broaching needles and matching accessories in tool cabinet Dimensions: LxWxH (machine): 1.6x1.5x2.3 m / Weight: 3500 kg Errors and omissions excepted.

Condition: excellent (used), Artrhur Klink RSH1 - 1250 Broach Grinder 09.2009 , new 1979, Table 200 x 1800, Electro mag 200 x 600, with related tooling/accessories, no cabinet. Iodpsw U Upnofx Aabjbc

Year of construction: 2003, condition: ready for operation (used), Max. operating pressure: 70bar, hydraulic fluid filling quantity: 630l, with loading portal and sliding guide with carriage. Ibedpfxelbmtce Aabjc

Condition: used, Hydraulic Keyseating Machine FRÖMAG Type RA D 63/425 Serial No. AKK 10102 ASK 2191 Year of manufacture 1981 Max. keyway width: 63 mm Max. working stroke: 425 mm Table size: 460 x 680 mm Working height - table height: 1320 mm Keyway depth feed: 0.01 to 0.25 mm/stroke (feed per stroke) Bore diameter: 10 to 400 mm Cutting speed: 2 to 22 m/min Motor power (hydraulics): 4 kW Power supply: 380 Volt, 50 Hz - Feed control for the rack from 0.01 to 0.25 mm per stroke - Manual and automatic operation - Control with digital selector and digital display Ibodpevvwxdofx Aabjc - Automatic feed with cut-off - Hydraulic working stroke with adjustable overload cut-off - Stroke preselection 1 to 9 - Centralised oil lubrication - Hydraulic cylinder equipped with new sealing elements (1/2025) - Operating manual, hydraulic diagram, and electrical schematic - The machine comes without tooling Weight: 1600 kg Space required L x W x H: 1100 x 800 x 1400 mm In good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Vertical Notch Broaching Machine Manufacturer: Blacks Model: 1 W-CNB 34 Machine No.: S05035C Ibsdow Rpvzepfx Aabsc Year of manufacture: 4/2005 Weight: 95kg General / Technical Data: Very well-maintained broaching machine for external notching of samples for tensile testing Broaching speeds: variable from 0.43 to 2.27 m/min Dimensions (H x W x D): 1370mm x 600mm x 450mm Power supply: 400V / 50 Hz Equipment: - Variable speed control via adjustable mechanical gearbox (manufacturer: Lenze); no electronic control! - Clamping fixture for tensile specimens - 3 used broaching tools - Machine documentation in German and English - Machine documentation including “CE” declaration of conformity in English General Information The dual spindle drive ensures smooth operation and a centrally aligned pull point, as well as a consistently uniform broaching speed. The broaching machine is a specially designed unit for machining V- and U-notches according to Charpy and Izod standards in pre-machined, square 10-mm standard test specimens. The CNB-34 produces a consistent notch of higher quality than what is achievable by milling. The machine is easy to operate and features a robust construction with removable maintenance panels for convenient routine servicing. Its design provides a comfortable working height. During the cutting process, a specially designed broaching tool is drawn over the specimen. The broaching tool is pulled downward into the machine via a gearbox and a dual spindle drive. The specimen is secured in the machine using the special clamping fixture. The broaching tool is lubricated with cutting oil. By pressing the broaching cycle button, the notch tool is forcibly guided down through the specimen, producing an accurate notch profile. After cutting the notch, the specimen must be removed before returning the tool. The tool is then returned without a workpiece and cleaned of any chips. Only after this cleaning step is the machine ready for further operation.

Condition: used, TECHNICAL DETAILS - max. force : 63 [kN] - broaching stroke : 1000 [mm] - spindle stroke : 400 [mm] - 3 cutting feeds : 2,5 - 5 - 7,5 [m/min] - return speed : 24 [m/min] - broaching positions : 1 - hydraulic motor : 9 [kW] Isdpfx Aoug U H Ueabobc - capacity of hydraulic tank : 600 [l] - capacity of cooling tank : 150 [l] - main voltage : 400 [V] - total power : 10,5 [kW] - floor space : 3.700 x 3.000 [mm] - total height : 3.200 [mm] - weight : 3.500 [kg]

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, workpiece diameter (max.): 900 mm, stroke length: 2,000 mm, control type: PLC-controlled, TECHNICAL DETAILS General Data Towing force: max. 9 t Total power requirement: 25 kW Ibjdpfx Aowx Ifxjaboc MACHINE DETAILS Machine type: Electromechanically driven internal vertical broaching machine FSR Features: Designed bridge for use with standard broaching tool holders Drive: Ball screw drives and hardened, ground round guides with regulated three-phase motors for smooth operation EQUIPMENT Feeds available Shim control available Sliding tables available Prepared for automation and integration into linked systems

Condition: used, functionality: fully functional, Year of construction: 2000, Internal broaching machine Make: Arthur Klink Type: RISH 10x1000x400 Year of construction: 2000 Iedpfjtpmnrox Aabebc

Condition: ready for operation (used), Year of construction: 1975, A used Henning R1200 broaching machine with accessories Ibodjv Ulh Djpfx Aabec

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11622 J9 HSS M-2 -Keyway width: 22 mm -Quantity: 1 piece available Isdpewt N H Tefx Aabsbc -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Iodpfxjw Ighio Aabjbc Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 25, workpiece diameter (max.): 40 mm, total length: 1,700 mm, total width: 2,400 mm, total height: 4,770 mm, cutting speed: 60,000 mm/min, TECHNICAL DETAILS Performance Data Maximum pulling force: 25 kN Maximum stroke: 1,000 mm Return stroke speed: 20 m/min Maximum shank diameter: 40 mm Clamping plate: 320 mm MACHINE DETAILS Machine weight: approx. 6,000 kg Control cabinet Weight: approx. 800 kg Total installed power: 24 kW Coolant system Ibjdpfx Ajwx Ibmjabsc Net weight: approx. 1,300 kg Tank capacity: 630 l Hydraulic unit Net weight: approx. 2,000 kg Tank capacity: 800 l

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 20, Used CNC internal broaching machine Ijdpfev Htlusx Aabjbc Make: FORST Type: RISH 63X1000X320 Year of manufacture: 1999/ Reconditioned Mach. No.: 20

Condition: ready for operation (used), A used broaching machine Rausch RS 6/1300 with accessories Isdev Ulhdjpfx Aabebc For technical data see PDF.

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle Ibjdpfx Aowt N Hysabec -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11518 18MM V -Keyway width: 18 mm -Quantity: 1 piece available -Dimensions box: 395/40/H40 mm -Weight: 1.3 kg

Condition: used, Year of construction: 1990, machine/vehicle number: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outside broaching tractive force: 25.000kg cutting speed: 7,2 / 8,1 / 9,6m/min maximum tool length: 3520mm passage width: 520mm clamping area of the tool carrier: 3520 x 460 mm dimension: 12.300 x 6.400 x 4650mm power supply: 380V 50Hz / 110kW Accessories/ special equipment: - 6 tool carriers for tool change - machine documentation Remark / General The machines are in a good condition. The machines are dismantled and stored in our warehouse. The total volume of the plant is several trucks (approx. 70to per machine). The machines have produced connecting rods for passenger car diesel engines. Chain broaching machines are designed for mass production. The continuous (backstroke-free) working process in chain broaching is designed for maximum achievable productivity in external broaching. The chain broaching process is the only broaching process without a backstroke of the tools or workpieces. In chain broaching, the workpiece is continuously moved past the tool and thus performs the feed movement. and thus carries out the feed motion. This unique broaching process is only used for very large quantities in series production. Ibodpfx Aeinim Teaboc

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach Ibodpfxewt N E Ao Aabec -Type: 11620 J9 HSS M-2 -Keyway width: 20 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Ibedpfxsw H Dgne Aabjc Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: used, Year of construction: 1990, max.: tractive force 25.000 KG max.: tool length 3520 mm max.: cutting speed 9,6 m/min passage width 520 mm The machine has machined connecting rods and con rod caps. The machine is designed for mass production (output 400 pieces/hour). Ijdpjcm Eiwofx Aabjbc

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of Manufacture: 1995 Weight: 400 kg Overhaul Due: 04/2025 by Wiemers AG General / Technical Data: Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard keyway broaches "Rausch system" Workpiece diameter: unlimited (removable coolant swiveling system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Safety door with interlock system (emergency stop circuit) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective covers for stroke adjustment and electrical switch gear - Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool) - Integrated coolant system - Coolant swiveling system (without electrical switching function) - Three-sided splash guard enclosure with wide front opening for working area - Extra reinforced chip basket and chip screen with magnet feature - Stainless steel operator panel with permanent labeling - 4 central lubrication points for leadscrew drive with manual grease gun - New machine documentation - CE marking by manufacturer (1995) Remarks: The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed: - New trapezoidal screws and nuts made of cast wear-resistant bronze - All bearings and seals replaced - The entire coolant system incl. coolant/lubricant swiveling system is new - New two-speed SEW gear motor - New electrical system (Siemens) - New safety door replacing the old light barrier - New clamping jaws - All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new - Stainless steel operator panel with permanent labeling - Machine has been newly painted with 2-component structural lacquer Isdpfx Aaow Huh Nsbjbc This machine carries the manufacturer’s CE marking. General Information: The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks). The design allows for quick and easy setup for broaching with flat broaches for keyway slots. Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.