Used Broach for sale (195)

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Type: GHC 12" Year of manufacture: 1981 workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Modu min/max.: 1,25-6,35mm Ijlhehad Avoccqlohu weight: 3,4t Operation: honing internal teeth

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Iholsrtrzaehccqleu Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: good (used), Year of construction: 1993, Equipped with: Ihjlhceruahwscqlou 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Trabon Lube Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Max. Table Angle Taper: 1 Deg 30' Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Table Cross Feed Inches Per Minute: .5-35 Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: used, Year of construction: 1982, pulling force - max. 3 t max. ram stroke 1000 mm max. workpiece diameter 200 mm table-size 500 x 220 mm working area 500 x 220 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm Ihjlhccqeyif Nxsleu table hole 50 mm total power requirement 6 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches. Ihjlhceyif Nlocqleu

Condition: excellent (used), functionality: fully functional, spindle mount: MK 0, Accessory device for milling machine Deckel FP 1 The slotting head is suitable for keyway slotting operations on the milling machine. It is suitable for planing operations in the vertical direction (Z-axis) on the milling machine. Ihslhcceyk In Njqlou The slotting head can be swiveled 360 degrees. The stroke of the ram is adjustable from 0 mm to 80 mm. Number of strokes: 16 to 200 strokes per minute. Tool holder approx. 16 x 16 mm. Accessories: 5 slotting tools with widths of approx. 5 mm, 7 mm, 9 mm (tool shank 16 x 15 mm). The slotting head is used. This is an original Deckel accessory device. The unit was only used by us for precision work. The slotting head is in very good condition. Weight: approx. 30 kg Price: Ex works, VAT can be shown separately. Payment: Invoice with VAT indicated. Payment upon collection or in advance. Delivery: Shipping via a parcel service is possible. Self-collection is possible. Terms of delivery: We deliver according to the Machineseeker standard contract, Standard purchase contract for used machinery from Machineseeker. A standard contract can be downloaded from Machineseeker. Delivery time: Available immediately.

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg Iholhcceydlq Ioqlju

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN Ihelhccoydlqzjqlju - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH TYPE SRM 2027 - 60 kN - New Machine - BROACHING MACHINES MADE IN GERMANY Currently available on attractive terms ===> A fully refurbished used broaching machine will soon be available – please send an inquiry if interested! ==> Information for manufacturing companies or dealers with their own production: If required, the drawings, rights, spare parts, customer and prospect data, as well as planning and production documentation (including planning for a 9-tonne pull force variant) for the broaching machine can be purchased from us. Please contact us if interested. ==> The new machines are made to order and manufactured upon request. Short lead times and delivery are possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available immediately from stock. Cost-effective and extremely robust vertical broaching machine for long-term operation. Broaching tools (including special needles for internal gearing, etc.) and accessories available upon request. Please contact us separately regarding this. All broaching tools and tool holders from other manufacturers can be used and fitted on our broaching machines! Complete manufacturing and assembly take place at our plant in Germany. Short delivery times available by arrangement. We also supply spare and wear parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears and all other required components – including electrical parts). Ielhcsuqbnhecqlohu Vertical Broaching Machine Type SRM 2026 - NEW MACHINE: The main area of application is the production of keyways from 3-28 mm and similarly dimensioned profiles. Due to its compact design with a small footprint, the machine is suitable for use in small, medium, and large enterprises. The low price makes it attractive even for small series and one-off production. Drive is via a pole-changeable geared brake motor. The maintenance-free twin spindle drive ensures smooth operation, a central pulling point, and constant cutting performance. The open table design allows for the unrestricted placement of large workpieces. In most cases, workpieces do not need to be tightly clamped for broaching. Stroke adjustment is performed using adjustable limit switches with stroke limitation. For short hubs/workpieces, multiple parts can be stacked and processed together. Broaching needles, mandrels, and spare parts are available at attractive terms upon request. Technical Data: Pulling force: 60 kN at 3m/min, 40 kN at 6m/min. Broaching speed: 3 m/min and 6 m/min. (Optionally available: stepless speed adjustment (from 0 m/min to 6 m/min possible via extended electronics)) Return speed: 6 m/min Stroke: 1050 mm Max. tool length: 1200 mm Workpiece diameter: unlimited Table size: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Overall height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: External RAL 7035/7036/7016, Internal RAL 3000, or custom Safety door: Standard equipment Coolant device: Standard equipment The machine complies with current Machinery Directive and is CE marked.

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. Ijlhjw Dugaeccqlshu return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. *

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical broaching machine with numerous holders Ijleykalmshccqlehu

Condition: ready for operation (used), Year of construction: 2008, A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible. Ihslhccjxph Sdoqlou

Condition: ready for operation (used), Year of construction: 2012, A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Iholhjxwcvmeccqlju

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm total power requirement 25 kW Ihelhoycxlcoccqlsu weight of the machine ca. 4,2 t

Condition: used, Year of construction: 1959, pulling force - max. 10 t max. ram stroke 1300 mm Ijlhjvh Nd Aeccqljhu voltage 380 V weight 1400 kg Broaching machine RAUSCH RS10/1300 Year of construction: 1959 Stroke: 1,800 mm Tractive force: 10 tonnes

Condition: not inspected (used), Year of construction: 1985, machine/vehicle number: 3561/601, overall weight: 340 kg, total length: 1,000 mm, total width: 600 mm, total height: 1,500 mm, Rausch Broaching Machine / Keyseating Machine RS 3/800 ● Year of manufacture: 1985 ● Machine number: 3561 / 601 ● Condition: Uninspected ● Delivery terms: Free loaded on truck ● Location: 39126 Magdeburg, Germany ● Availability: Immediately, by arrangement ● Payment terms: Advance payment by bank transfer ● Internal ref. no.: JFW1 Technical data: Power supply: 380 V, 50 Hz Connected load: 1.7 kW Rated current: 6 A Scope of delivery: Existing manuals Broaching tools as shown in the pictures Accessories as shown in the pictures Dimensions & weights: Installation dimensions (L x W x H approx.): 1000 x 600 x 1500 mm Weight approx.: 340 kg Iolhccqoyhbrieljhu Additional notes: ►Transport to the destination can be offered upon request ►The quoted price is net, VAT not included ►The goods are sold with warranty excluded ►Technical data without guarantee ►Subject to prior sale ❗Sale exclusively to business customers❗

Condition: good (used), Year of construction: 1980, machine/vehicle number: 20007, Offer 23326 Technical specifications: - Broaching tool width up to 10 mm - Broaching tool length up to 1000 mm - Pulling force: 1.5 t - Working speed: 4 m/min - Working / operating height: 1000 mm - Drive: 400 V / 1.5 kW Ijlhsyfgc Isccqlohu - Required space: approx. W 1500 x H 1000 x D 400 mm - Weight: approx. 200 kg

Condition: used, Multi-wedge broach, hexagonal broaching tool, broaching tool, broach, special tool, grooving tool, grooving machine, slotting machine, slotting machine, slotting tool, slotting broach Ihjlhccqsitt R Selsu -Manufacturer: SWZ, broach, impact broach -Type: SW 19 1TGL 29-16600/02 20/50 HSS -Item no.: 440 0432 08 102 04708 -Width: Hexagonal 19 mm wrench width, see photos -Quantity: 1 piece available -Total dimensions: 950/22/22 mm -Weight: 1.7kg

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: Planeta Coswig, broach push broach -Type: 16D11x2.7 34-120inSt 34-165inGG Ihjlhcceitt Sajqlju - Width: 16mm -Number: 1x available -Total dimensions: 1250/16/H30 mm -Weight: 4.2kg

Condition: excellent (used), Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 -Width: 6mm -Number: 2x broach available Ihelsitt Ryshccqleu -Price per piece -Total dimensions: 900/6/H13 mm -Weight: 0.5 kg/pc.

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKC -Width: Square 22 mm -Quantity: 3 pieces available -Price per piece -Total dimensions: Ø 22 x 925 mm Ihelhccoitt R Isqlsu -Weight: 2.1 kg/piece

Condition: used, Square broaching tool, multi-wedge broaching needle, broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Width: Square 17 mm wrench size, see photos Iolhccqskkzymoljhu -Type: unfortunately no longer readable -Size: see photos -Quantity: 1 piece available -Total dimensions: Ø 19 x 955 mm -Weight: 1.3kg

Condition: good (used), Cardinal Broach Islsq R T Hcohccqlohu Model TM7

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Workpiece Diameter: 620mm Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Pneumatic Connection: not required Colour: Blue RAL 5001, Grey RAL 7035 Iolhcceyazc Ssqljhu For further details, please see the PDF description in the attachment.

Condition: good (used), Keyseating machine FRÖMAG RAPIDA 463 incl. indexing table - Keyway width producible: 3 - 63 mm - Maximum keyway length: 600 mm - Indexing table - For bores from 10 - 500 mm - Feed size: 0.01 - 0.25 mm - Cutting speed steplessly adjustable 2 - 22 meters/min - Return speed - constant 50 meters/min - Load capacity: 3000 kg - Connected load: 4.6 kW - Including work platform Iheljx Tyx Hshccqlou - Various broaching needles and corresponding accessories in the tool cabinet Dimensions: LxWxH (machine): 1.6x1.5x2.3 meters / weight 3500 kg Subject to errors and data entry mistakes.