Used Center Lathe for sale (15,499)

Condition: new, Year of construction: 2026, 0360 mm Gujdpoy Ruvuofx Anxeb 215 mm 1000 mm 180 mm 42 mm 2,25/3,75 kW

Condition: new, Year of construction: 2026, 0330 mm 210 mm 0635 mm 167 mm 40 mm 2,2 kW spindle turning speed - stepless 30-3000 U/min Guodpeyu U Drofx Anxjb

Condition: new, Year of construction: 2026, 0390 mm 240 mm 1250 mm 190 mm 54 mm Gedpfx Ajwp Ti Denxoub 5,5 kW

Condition: used, turning diameter 500 mm turning length 1.250 mm turning speed range - main spindle 11,2 - 2.240 min/-1 In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale! Gjdpfx Asy Rakwsnxjub

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Guedoy Rpr Rspfx Anxsb Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm turning diameter over slide rest: 800 mm Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm Gujdpfxsy N Sw Hs Anxob spindle bore: 85 mm turning rate: 14 - 710 min-1 dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements The main spindle box was completely overhauled approx. 10 years ago. The vibration-damping elements are included in the scope of delivery. The machine is from the original owner.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis Godpfx Ansy N Swyoxjub fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 1972, turning length 5.500 mm greates pass round over bed 800 mm swing diameter over face slide 500 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Gujdpfx Anjy Nn Egoxeb Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: reconditioned (used), Product Information "Voest Alpine DA 160" Lead and feed screw lathe Voest Model DA 160 Condition: Refurbished Technical Specifications Centre height: 165 mm Distance between centres: 650 mm Swing over bed: 330 mm Swing over cross slide: 190 mm Bed width: 210 mm Lead screw diameter: 25 mm Chuck diameter: 160 mm Tailstock taper: MT 3 Guedjy Ndqrspfx Anxeb Spindle speeds (16): 30 - 2,500 rpm Motor power: 2 / 2.4 kW Quill travel: 100 mm Dimensions (LxWxH): 1,500 mm x 900 mm x 1,650 mm Equipment: - 3-axis digital readout, brand Sino – NEW - 3-jaw lathe chuck - Emergency-stop push button - Multifix quick-change toolholder system, 6 holders - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with Morse taper arbor - Live centre - Lead and feedscrew cover NEW - Chuck guard, secured with limit switch - Operating tools - Operating manual - Machine feet

Condition: used, Year of construction: 1987, greates pass round over bed 560 mm swing diameter over face slide 365 mm turning speed range - main spindle 11,2 - 2.240 min/-1 drive capacity - main spindle 15 kW spindle head No. 8 spindle diameter in front bearing 100 mm spindle bore 62 mm machine weight ab. 2,5 t dimensions of the machine ca. L 3,5 x B 2,0 x H 2,2 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine has undergone a geometric overhaul. Technical features & accessories: - 3-axis digital readout, Fagor Gedpfxey Nfble Anxeub - Rapid traverse Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Gedpfsy Icbaox Anxsub

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 170 mm, spindle bore: 75 mm, turning diameter over bed slide: 280 mm, center width: 1,600 mm, spindle speed (max.): 1,320 rpm, TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 170 mm Centre height: 220 mm Centre distance: 1600 mm Spindle speed range: 25 - 1320 rpm Spindle bore: 75 mm Tailstock quill taper: MT 4 MACHINE DETAILS Machine weight: approx. 2025 kg EQUIPMENT Heidenhain digital readout Guodpsy Iwm Rofx Anxeb Multifix tool holder Coolant system Machine lamp

Condition: used, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: Heidenreich & Harbeck, Type VDF V3 Technical Data Brand: Heidenreich & Harbeck Type: VDF V3 Year of manufacture: unknown Control: conventional Centre distance: 1000 mm Swing diameter over bed: 520 mm Spindle bore: 63 mm Dimensions: L 3.40 x W 1.10 x H 1.40 m Machine weight: approx. 3.5 t Equipment - 4-jaw chuck Röhm, diameter 250 mm All information provided without guarantee. Guodpfx Aney Iyzqjxob A power-on demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2018, functionality: fully functional, spindle bore: 58 mm, total length: 1,900 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,000 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, spindle mount: MK 6, SAEILO CONTUR SJ 430/760 VS Lead and Feed Screw Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Distance between centers: 760 mm Gedpfsyuvthjx Anxoub - Swing over bed: 430 mm - Swing over cross slide: 240 mm - Swing over gap: 690 mm - Spindle bore taper: MK 6 - Longitudinal feeds: 0.05 - 0.82 mm/rev - Cross feeds: 0.02 - 0.4 mm/rev - Metric threads: 0.5 - 7 mm - Leadscrew diameter: 35 mm - Leadscrew pitch: 6 mm - Tailstock quill diameter: 58 mm - Tailstock quill travel: 150 mm - Quill taper: MK 4 - Motor power: 7.5 kW The machine is equipped with a tailstock, a Multifix quick-change tool post, a SCHUNK 3-jaw chuck (diameter: 200 mm), a digital readout, and 4 additional Multifix tool holders. Attention: The item must be collected between 05 and 07 May 2026 on a binding date to be agreed. FCA D-73235 Weilheim Teck – loaded onto truck.

Condition: excellent (used), With DRO With step-down gear for spindle speeds Guodpfxjy Iz Ixo Anxob Center height150 mm Distance between centers 630 mm Turning diameter over bed 340 mm Spindlespeeds 55-3000 rpm Spindle bore 40 mm Pitch of leading screw 4 mm Tail stock MK5 Misc.accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg Gusdsy Nd Siepfx Anxeb bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display Gusdpfx Aey Izauenxob incl. quick-change tool holder 'Set', Multifix system for further information, see data sheet ELMAG warranty: 3 years (with online registration after purchase) NOT THE RIGHT MACHINE? We are official ELMAG partners and can offer you the entire range of ELMAG products! Request a quote!

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 178 mm, turning diameter over bed slide: 300 mm, center height: 178 mm, center width: 914 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,700 mm, total width: 750 mm, total height: 1,270 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, quill mount: MK 3, incl. 3-axis position display incl. RÖHM lathe chuck incl. quick-change toolholder 'set', Multifix system for further details see data sheet ELMAG warranty: 3 years (upon online registration after purchase) Delivery throughout Germany: FREE OF CHARGE NOT THE RIGHT MACHINE? WE ARE AN ELMAG AUTHORIZED PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE ELMAG RANGE! REQUEST A QUOTE! Godpfx Ansy Iy H Hsxeub

Condition: good (used), turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning length 1500 mm dia. of quill 80 mm quill stroke 200 mm taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA Gjdpey Hxq Uefx Anxeub spindle bore 60 mm weight of the machine ca. 2800 kg

Condition: refurbished (used), Product information "Leadscrew and feedscrew lathe Kern D 20 A" Leadscrew and feedscrew lathe from Kern Type / Model: D 20 A Condition: Overhauled Technical data: Centre height: 215 mm Centre distance: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Gsdpfx Aey H Iqwsnxoub Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - 3-axis digital readout - Emergency stop push button - Multifix quick-change toolpost system - Machine light - Coolant system - Live centre

Condition: refurbished (used), Kern Lead Screw and Feed Shaft Lathe Type / Model: D 20 A Condition: Refurbished Technical Data Centre height: 215 mm Centre distance: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speed range (24): 31.5 - 1400 rpm Gjdpfxsy H Eckj Anxeub Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - 3-axis digital readout - Emergency stop button - Quick-change tool post, Multifix system - Machine light - Coolant system - Rotating centre

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate Gujdpfx Anjy Duy Hexsb - Steady rest - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 0529/90, turning diameter over cross slide: 400 mm, spindle bore: 50 mm, turning diameter: 1,000 mm, center height: 200 mm, turning length: 1,000 mm, overall weight: 1,800 kg, For sale: Universal lathe Prvomajska - Type: TNP 190 / 1000 - Machine No.: 0529 / 90 - Year: 1990 - Weight: 1800 kg - Certificate: 0251 - Max. turning length: 1000 mm - Max. turning diameter: 400 mm - Spindle bore: d=50 mm ACCESSORIES: faceplate fi200, tailstock centre, drill chuck head, tool holders, tapers for large drills, sleeves for large workpieces, various belts, various drills… Gusdpfoy Rzt Tex Anxsb The machine has been regularly serviced, maintained, and is in excellent condition. It has performed various tooling operations. It is connected to the power supply and ready for immediate use.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 0216/88, turning diameter over cross slide: 400 mm, spindle bore: 50 mm, turning diameter: 1,000 mm, center height: 200 mm, turning length: 1,000 mm, overall weight: 1,850 kg, For sale: Universal lathe Prvomajska - Type: TNP 380 1000 - Machine No.: 0216/88 - Year: 1988 - Weight: 1850 kg - Max. turning length: 1000 mm - Max. turning diameter: 400 mm - Spindle bore: d=50 mm ACCESSORIES: lathe chuck fi200, tailstock center, drill chuck, tool holders, tapers for large drills, steadies for large workpieces, various belts, various drills… Gsdpsy Rztyjfx Anxjub The machine has been regularly serviced, maintained, and is in excellent condition. It has been used for various tooling jobs. It is connected to the electrical network and ready to operate.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 1006, turning diameter over cross slide: 360 mm, spindle bore: 50 mm, turning diameter: 360 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, turning length: 500 mm, overall weight: 1,500 kg, For sale: Universal lathe Prvomajska - Type: TNP 160B /500 - Machine No.: 1106/83 - Year: 1983 - Weight: 1500 kg - Max. turning length: 500 mm - Max. turning diameter: 360 mm - Spindle bore diameter: 50 mm ACCESSORIES: lathe chuck Ø200, tailstock center, drill chuck, tool holders, Morse tapers for large drills, steady rests for large workpieces, various drills, etc. Guedpfxjy Rzr As Anxsb The machine has been regularly serviced and maintained, and is in excellent condition. It has performed various tooling jobs. It is connected to the electrical mains and ready for immediate use.